Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-13T02:17:03.929Z Has data issue: false hasContentIssue false
  • English
  • Français

Potential Usage of Energetic Nano-sized Powders for Combustion and Rocket Propulsion

Published online by Cambridge University Press:  01 February 2011

Kenneth K. Kuo ,
Grant A. Risha ,
Brian J. Evans  and
Eric Boyer
Kenneth K. Kuo
Affiliation:
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802
Grant A. Risha
Affiliation:
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802
Brian J. Evans
Affiliation:
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802
Eric Boyer
Affiliation:
Department of Mechanical and Nuclear Engineering, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

Nano-sized energetic metals and boron particles (with dimensions less than 100 nanometers) possess desirable combustion characteristics such as high heats of combustion and fast energy release rates. Because of their capability to enhance performance, various metals have been introduced in solid propellant formulations, gel propellants, and solid fuels. There are many advantages of incorporating nano-sized materials into fuels and propellants, such as: 1) shortened ignition delay; 2) shortened burn times, resulting in more complete combustion in volume-limited propulsion systems; 3) enhanced heat-transfer rates from higher specific surface area; 4) greater flexibility in designing new energetic fuel/propellants with desirable physical properties; 5) nano-particles can act as a gelling agent to replace inert or low-energy gellants; 6) nano-sized particles can also be dispersed into high-temperature zone for direct oxidation reaction and rapid energy release, and 7) enhanced propulsive performance with increased density impulse. In view of these advantages, numerous techniques have been developed for synthesizing nano-particles of different sizes and shapes. To reduce any possible hazards associated with the handling of nano-sized particles as well as unwanted particle oxidation, various passivation procedures have been developed. Some of these coating materials could enhance the ignition and combustion behavior, others could increase the compatibility of the particles with the surrounding material. Many researchers have been actively engaged in the characterization of the ignition and combustion behavior of nano-sized particles as well as the assessment of performance enhancement of propellants and fuels containing energetic nano-particles. For example, solid fuels could contain a significant percentage of nano-sized particles to increase the mass-burning rate in hybrid rocket motors, the regression rate of solid propellants can be increased by several times when nano-sized particles are incorporated into the formulation. Specifically, hybrid motor data showed that the addition of 13% energetic aluminum powders can increase the linear regression rate of solid HTPB-based fuel by 123% in comparison to the non-aluminized HTPB fuel at a moderate gaseous oxidizer mass flow rate. Strand burner studies of two identical solid propellant formulations (one with 18% regular aluminum powder and the other with 9% aluminum replaced by Alex® powder) showed that nano-sized particles can increase the linear burning rate of solid propellants by 100%. In addition to solid fuels and propellants, spray combustion of bipropellants has been conducted using gel propellants impregnated with nano-sized boron particles as the fuel in a rocket engine. High combustion efficiencies were obtained from burning nano-sized boron particles contained in a non-toxic liquid-fuel spray. Materials characterization such as chemical analyses to determine the active aluminum content, density measurements, and imaging using an electron microscope have been performed on both neat nano-sized particles and mixtures containing the energetic materials. In general, using energetic nano-sized particles as a new design parameter, propulsion performance of future propellants and fuels can be greatly enhanced.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 800: Symposium AA – Synthesis, Characterization, and Properties of Energetic/Reactive Nanomaterials , 2003 , AA1.1
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Miziolek, A., “Nanoenergetics: An Emerging Technology Area of National Importance”, The AMPTIAC Newsletter, Vol. 6, No. 1, pp. 43–48 (2002).Google Scholar
2. Gash, A.E., Simpson, R.L., Tillotson, T.M., Satcher, J.H., and Hrubesh, L.W., “Making Nanostructured Pyrotechnics in a Beaker”, Proceedings of the 27th International Pyrotechnics Seminar, pp. 41–53, Grand Junction, Colorado, (2000).Google Scholar
3. Jigatch, A.N., Leipunsky, I.O., Kuskov, M.L., Pshechenkov, P.A., Laritchev, M.N., Krasovsky, V.G., Gogulya, M.F., “A Technique to Prepare Aluminized Nano-Sized Energetic Composition”, AIAA 2002–5735, NanoTech 2002-At the Edge of Revolution, Houston, Texas (2002).Google Scholar
4. Ivanov, G. V., and Tepper, F., “Activated Aluminum as a Stored Energy Source for Propellants”, Challenges in Propellants and Combustion 100 Years after Nobel, ed. Kuo, K. K. et al. (Begell House, 1997) pp. 636–645.Google Scholar
5. Mench, M.M., Yeh, C.L., and Kuo, K.K., “Propellant Burning Rate Enhancement and Thermal Behavior of Ultra-fine Aluminum Powders (Alex)”, Proc. of the 29th Annual Conference of ICT, pp. 30–1-15 (1998).Google Scholar
6. Risha, G.A., Evans, B.J., Boyer, E., Wehrman, R.B., and Kuo, K.K., “Nano-Sized Aluminum- and Boron-Based Solid-Fuel Characterization in a Hybrid Rocket Engine”, AIAA 2003–4593, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama (2003).Google Scholar
7. Chiaverini, M.J., Kuo, K.K., Peretz, A., and Harting, G.C., “Heat Flux and Internal Ballistic Characterization of a Hybrid Rocket Motor Analog”, AIAA 97–3080, 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Seattle, Washington (1997).Google Scholar
8. Giraud, E., Tauzia, J.M., Lacroix, G., Murphy, C.M., Muscato, R.S., Newton, W.F., Gallant, F.M., Michienzi, M.A., and Johnson, S., “Continuous Processing of Composite Propellants (CPOCP), a joint project between SNPE and Indian Head Division, Naval Surface Warfare Center (IHDIV, NSWC)”, Proceedings of the 29th International Annual Conference of ICT, June 30-July 3, Karlsruhe, Germany, pp. 44–1 to 44–23 (1998).Google Scholar
9. Tatum, D. and Kuo, K.K., “Physicochemical Considerations in Modeling Ignition & Combustion of Highly Non-Spherical Nano-Sized Aluminum Particles”, AIAA 2003–5211, 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Huntsville, Alabama (2003).Google Scholar
10. Palaszewski, B., “Nanotechnology and Gelled Cryogenic Fuels”, Presentation to Dr. M. Dastoor, NASA Nano/Bio Initiative, May 30 (2001).Google Scholar
11. Mordosky, J.W., Zhang, B.Q., and Kuo, K.K., “Spray Combustion of Gelled RP-1 Propellants Containing Nano-Sized Aluminum Particles in Rocket Engine Conditions”, AIAA 2001–3274, 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Salt Lake City, Utah (2001).Google Scholar