Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-29T14:03:58.458Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Characterization of BN Nanotubes with Controllable Sizes by Template-aided Synthesis

Published online by Cambridge University Press:  01 February 2011

Yuting Wang ,
Shiro Shimada ,
Hajime Kiyono  and
Yasunori Yamamoto
Yuting Wang
Affiliation:
ytwang@eng.hokudai.ac.jp, Hokkaido University, Graduate School of Engineering, N13, W8, Kita-ku, Sapporo, 060-8628, Japan
Shiro Shimada
Affiliation:
shimashi@eng.hokudai.ac.jp, Hokkaido University, Graduate School of Engineering, sapporo, 060-8628, Japan
Hajime Kiyono
Affiliation:
kiyono@eng.hokudai.ac.jp, Hokkaido University, Graduate School of Engineering, sapporo, 060-8628, Japan
Yasunori Yamamoto
Affiliation:
yasuyama@eng.hokudai. ac.jp, Hokkaido University, Graduate School of Engineering, sapporo, 060-8628, Japan
Get access

Abstract

In this study, an efficient approach to prepare high quality BN nanotubes (BNNTs) was developed. BNNTs with specific sizes were prepared by sublimation of ammonia borane complex (BH3NH3) using two kinds of porous alumina anodic membrane template in two independently temperature controlled furnaces in a glovebox filled with N2. The BNNTs with template were nitrided at different temperatures 1300 ∼ 1700 °C in NH3. The BNNTs of 200 – 300 nm wide°60×°m long, and 70 – 80 nm wide°×40 μm long were finally collected after removal of the template by etching of with 40 wt% NaOH solution. The fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) results confirmed the formation of BN from BH3NH3. Ordered arrays of BNNTs were observed by scanning electron microscopy (SEM), and the microstructure of these BNNTs was investigated by transmission electron microscopy (TEM). It was found that the diameters of the BNNTs can be easily controlled by using templates with different pore sizes. The wall thickness of the nanotubes was increased by increasing the sublimation time or the amount of the starting BH3NH3. The crystallinity of BNNTs was improved at higher temperatures (1700 °C) in NH3.

Keywords

nanostructureIII-Vpyrolysis
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1081: Symposium P – Carbon Nanotubes and Related Low-Dimensional Materials , 2008 , 1081-P05-22
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ma, R., et al. , Hydrogen uptake in boron nitride nanotubes at room temperature. J Am Chem. Soc, 2002. 124(26): p. 7672–7673.Google Scholar
2. Zhu, Y.C., et al. , New Boron Nitride Whiskers: Showing Strong Ultraviolet and Visible Light Luminescence. 2004. 108(20): p. 6193–6196.Google Scholar
3. Zhi, C., et al. , SnO2 nanoparticle-functionalized boron nitride nanotubes. J Phys Chem. B, 2006. 110(17): p. 8548–50.Google Scholar
4. Tang, C., et al. , Catalyzed Collapse and Enhanced Hydrogen Storage of BN Nanotubes. J Am Chem Soc., 2002. p. 14550–14551.Google Scholar
5. Zhou, Z., et al. , Comparative Study of Hydrogen Adsorption on Carbon and BN Nanotubes. J Phys Chem. B, 2006. 110(27): p. 13363–13369.Google Scholar
6. Wu, J.C.S., Fan, Y.C., and Lin, C.A., Deep Oxidation of Methanol Using a Novel Pt/Boron Nitride Catalyst. Ind.Eng.Chem.Res., 2003. 42(14): p. 3225–3229.Google Scholar
7. Chopra, N.G., et al. , Boron Nitride Nanotubes. Science 1995. 269(5226): p. 966–967.Google Scholar
8. Chen, X., et al. , Preparation and Electrochemical Hydrogen Storage of Boron Nitride Nanotubes. Chem. Mater., 2005. 109(23): p. 11525–11529.Google Scholar
9. Loiseau, A., et al. , Boron nitride nanotubes with reduced numbers of layers synthesized by arc discharge. Phys Rev Lett, 1996. 76(25): p. 4737–4740.Google Scholar
10. Yu, J., et al. , In Situ Formation of BN Nanotubes during Nitriding Reactions. Chem. Mater., 2005. p. 5172–5176.Google Scholar
11. Terauchi, M., M.T., Suzuki, K., Ogino, A., Kimura, K., Production of ziazag-type BN nanotubes and BN cones by thermal annealing. Chemical Physics Letters, 2000. 324: p. 359–364.Google Scholar
12. Thompson, G.E., Porous anodic alumina: fabrication, characterization and applications. Thin solid films, 1997. 297: p. 192–201.Google Scholar
13. Baitalow, F., et al. , Thermal decomposition of B-N-H compounds investigated by using combined thermoanalytical methods. Thermochimica Acta, 2002. 391(1-2): p. 159–168.Google Scholar