Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-29T15:55:22.020Z Has data issue: false hasContentIssue false

Preparation of Narrow-gap a-Si:H Solar Cells by VHF-PECVD Technique

Published online by Cambridge University Press:  01 February 2011

Do Yun Kim
Affiliation:
kim.d.ag@m.titech.ac.jp, Tokyo Institute of Technology, Physical electronics, Tokyo, Japan
Ihsanul Afdi Yunaz
Affiliation:
ihsan.y.aa@m.titech.ac.jp, Tokyo Institute of Technology, Physical electronics, Tokyo, Japan
Shunsuke Kasashima
Affiliation:
kasashima.s.aa@m.titech.ac.jp, Tokyo Institute of Technology, Physical electronics, Tokyo, Japan
Shinsuke Miyajima
Affiliation:
miyajima.s.aa@m.titech.ac.jp, Tokyo Institute of Technology, Physical electronics, Tokyo, Japan
Makoto Konagai
Affiliation:
konagai.m.aa@m.titech.ac.jp, Tokyo Institute of Technology, Physical electronics, Tokyo, Japan
Get access

Abstract

Optical, electrical and structural properties of silicon films depending on hydrogen flow rate (RH), substrate temperature (TS), and deposition pressure (PD) were investigated. By decreasing RH and increasing TS and PD, the optical band gap (Eopt) of silicon thin films drastically declined from 1.8 to 1.63 eV without a big deterioration in electrical properties. We employed all the investigated Si thin films for p-i-n structured solar cells as absorbers with i-layer thickness of 300 nm. From the measurement of solar cell performances, it was clearly observed that spectral response in long wavelength was enhanced as Eopt of absorber layers decreased. Using the solar cell whose Eopt of i-layer was 1.65 eV, the highest QE at long wavelength with the short circuit current density (Jsc) of 16.34 mA/cm2 was achieved, and open circuit voltage (Voc), fill factor (FF), and conversion efficiency (η) were 0.66 V, 0.57, and 6.13%, respectively.

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Myong, S. Y., Sriprapha, K., Yashiki, Y., Miyajima, S., Yamada, A., and Konagai, M., Sol. Energy Mater. Sol. Cells 92, 639 (2008).Google Scholar
2 Yang, J., Yan, B., and Guha, S., Thin Solid Films 487, 162 (2005)Google Scholar
3 Yunaz, I. A., Hashizume, K., Miyajima, S., Yamada, A., and Konagai, M., Sol. Enegry Mater. Sol. Cells 93, 1056 (2009).Google Scholar
4 Inthisang, S., Sriprapha, K., Miyajima, S., Yamada, A., and Konagai, M., Jpn. J. Appl. Phys. 49, 122402–1 (2009).Google Scholar
5 Agarwal, P., Povolny, H., Han, S., and Deng, X., J. Non-Cryst. Solids 299–302, 1213 (2002).Google Scholar
6 Kruzelecky, R. V., Racansky, D., Zukotynski, S., and Perz, J. M., J. Non-Cryst. Solids 99, 89 (1988)Google Scholar
7 Tauc, J., Grigorovici, R., and Vancu, A., Phys. Status Solidi 15, 627 (1966).Google Scholar
8 Droz, C., Vallat-Sauvain, E., Bailat, J., Feiknecht, L., Meier, J., and Shah, A., Sol. Energy Mater. Sol. Cells, 81, 61 (2004)Google Scholar
9 Kroll, U., Meier, J., Torres, P., Pohl, J., and Shah, A., J. Non-Cryst. Solids 227, 68 (1998).Google Scholar
10 Maha, A. H., Gedvillas, L. M., and Webb, J. D., J. Appl. Phys. 87, 1650 (2000).Google Scholar
11 Lee, C. H., Sazonov, A., and Nathan, A., Appl. Phys. Lett. 86, 222106 (2005).Google Scholar
12 Gutirrez, M. T., Carabe, J., Gandia, J. J. and Solonko, A., Sol. Energy Mater. Sol. Cells 26, 259 (1992).Google Scholar
13 Guo, L., Kondo, M., Fukawa, M., Saitoh, K., and Matsuda, A., Jpn. J. Appl. Phys. 37, L1116 (1998).Google Scholar
14 Kondo, M., Fukawa, M., Guo, L., and Matsuda, A., J. Non-Cryst. Solids 266, 84 (2000).Google Scholar
15 Sutterluti, J., Janki, S., Hugli, A., Meier, J., and Baumgartner, F. P., Proc. 21st EU PVSEC, Dresden, Germany, (2006) pp. 17491752.Google Scholar
16 Dairiki, K., Yamada, A., and Konagai, M., Proc. 26th IEEE PVSC, Anaheim, CA, (1997) pp. 779782.Google Scholar