Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-29T15:00:48.934Z Has data issue: false hasContentIssue false

Pseudoelasticity of D03 Ordered Monocrystalline Fe3Al

Published online by Cambridge University Press:  26 February 2011

S. Kabra
Affiliation:
The University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 37996
H. Bei
Affiliation:
The University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 37996 Oak Ridge National Laboratory, Metals and Ceramics Division, Oak Ridge, TN 37831
D. W. Brown
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
M.A.M. Bourke
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
E. P. George
Affiliation:
The University of Tennessee, Department of Materials Science and Engineering, Knoxville, TN 37996 Oak Ridge National Laboratory, Metals and Ceramics Division, Oak Ridge, TN 37831
Get access

Abstract

Pseudoelasticity in monocrystalline Fe3Al (23 at.% Al) was investigated by room-temperature mechanical testing along the <418> tensile and compressive axes. In tension, up to ∼10% strain is recoverable whereas only ∼5% strain is recoverable in compression. Straight, parallel, surface step lines were seen to appear/disappear as the specimens were pseudoelastically loaded/unloaded. In contrast, in the plastic region (ε >10%), wavy slip lines appeared on the specimen surfaces which did not disappear upon unloading. In-situ neutron diffraction was performed during compressive straining and the intensities of several diffraction peaks increase/decrease reversibly during loading/unloading. These changes are consistent with a deformation twin which produces large crystal rotations. They could also be indicative of a phase transformation. Unfortunately, we were able to sample only a limited range of 2θ in the present investigation and, within this range, none of the new peaks that appeared during the pseudoelastic deformation were disallowed peaks for the D03 crystal structure. Therefore we are unable at this time to distinguish between the two possible mechanisms, twinning and phase transformation.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. McKamey, C.G., DeVan, J.H., Tortorelli, P.F. and Sikka, V.K.. J. Mater. Res. 6, 1779 (1991).Google Scholar
2. Guedou, J.Y., Paliard, M., Rieu, J., Scripta Met. 10, 631 (1976).Google Scholar
3. Guedou, J.Y., Rieu, J., Scripta Met. 12, 927 (1978).Google Scholar
4. Kubin, L.P., Fourdeux, A., Guedou, J.Y., Rieu, J., Phil. Mag. A 46, 357 (1982).Google Scholar
5. Nosova, G.I., Polyakova, N.A., Novikova, Ye. Ye., Phys. Met. Metall. 61, 151 (1986).Google Scholar
6. Brinck, A., Engelke, C., Neuhäuser, H., Scipta Mater. 37(5), 569 (1997).Google Scholar
7. Langmaack, E., Nembach, E., Phil. Mag. A 79, 2359 (1999).Google Scholar
8. Yasuda, H.Y., Nakano, K., Ueda, M., Umakoshi, Y., Mat. Sci. Forum 426–432, 1801 (2003).Google Scholar
9. Yasuda, H.Y., Nakano, K., Nakajima, T., Ueda, M., Umakoshi, Y., Acta Mater. 51, 5101 (2003).Google Scholar
10. Otsuka, K., Wayman, C.M., “Shape memory materilas”, Cambridge University Press, New York, 1998.Google Scholar
11. Bourke, M. A.M., Dunand, D. C., and Ustundag, E., Applied Physics A 74, s1707 (2002).Google Scholar