Hostname: page-component-6bf8c574d5-8gtf8 Total loading time: 0 Render date: 2025-02-22T20:28:27.406Z Has data issue: false hasContentIssue false
  • English
  • Français

Pulsed Electron Beam Processing of Silicon Devices

Published online by Cambridge University Press:  15 February 2011

A. C. Greenwald ,
R. P. Dolan  and
S. P. Tobin
A. C. Greenwald
Affiliation:
Spire Corporation, Bedford, MA 01730USA
R. P. Dolan
Affiliation:
Spire Corporation, Bedford, MA 01730USA
S. P. Tobin
Affiliation:
Spire Corporation, Bedford, MA 01730USA
Get access

Abstract

Pulsed electron beams [1] were used to anneal ion-implanted diodes, transistors, and resistors. Devices were fabricated by patterning a thermal oxide on a silicon wafer, ion-implanting and pulse processing with the oxide in place, and then applying contacts. Oxide films over 0.3 micron thick were not damaged, and the silicon below these films was not melted by the pulsed electron beam. Low-dose (101311B+/cm2), implanted, pulse-annealed resistors showed no change in sheet resistance for oxide windows 2.5 to 50.0 microns wide. Diodes were fashioned with good forward and reverse I-V characteristics, with m=1.09 and IO=2.7×10−10 A/cm2 for I=IO exp(qV.mkT)−1 , when a low-temperature (550˚C, 1 hr), postpulse anneal was included in the process sequence. Both bipolar and FET types of transistors were fabricated. Results compare favorably with thermal annealing cycles.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1: Symposium – Laser and Electron-Beam Solid Interactions in Materials Processing , 1980 , 321
Copyright
Copyright © Materials Research Society 1981

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Greenwald, A. C. et al. , J. Appl. Phys. 50, 783 (1979).Google Scholar
2. Kirkpatrick, A. R. et al. , IEEE Trans. Electron Devices ED–24, 429 (1977).Google Scholar
3. Kirkpatrick, A. R. et al. , 14thIEEE Photovoltaic Spec. Conf. (1980), No. 80CH1508–1, IEEE, New York, p. 820Google Scholar
4. Uda, K. and Kamoshida, M., J. Appl. Phys. 48, 18 (1977).CrossRefGoogle Scholar
5. Greenwald, A. C. et al. , IEEE Trans. Nucl. Sci. NS–26(1), 1683 (Feb. 1979).Google Scholar
6. Kamins, T. K. and Rose, P. H., J. Appl. Phys. 50, 1308 (1979).CrossRefGoogle Scholar
7. Inada, T. et al. , Electron. Lett. 16(2), 54 (1980).Google Scholar
8. Schott, J. T. et al. , J. Electron. Mater. 9, 419 (1980).CrossRefGoogle Scholar
9. Possin, G., General Electric, private communication.Google Scholar
10. Greenwald, A. C. and Little, R. G., Solid State Technol. 22(4), 143 (April 1979).Google Scholar
11. Greenwald, A. C. and Comer, J. J. in: Laser and Eletron Beam Processing of Materials, White, C. W. and Peercy, P. S. eds. (Academic Press, New York 1980) pp. 575–580.Google Scholar