Hostname: page-component-6bf8c574d5-h6jzd Total loading time: 0.001 Render date: 2025-02-22T23:30:23.679Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapidly Solidified Binary Tial Alloys

Published online by Cambridge University Press:  28 February 2011

S. C. Huang ,
E. L. Hall  and
M. F. X. Gigliotti
S. C. Huang
Affiliation:
General Electric Research and Development Center, Schenectady, New York 12301
E. L. Hall
Affiliation:
General Electric Research and Development Center, Schenectady, New York 12301
M. F. X. Gigliotti
Affiliation:
General Electric Research and Development Center, Schenectady, New York 12301
Get access

Abstract

Melt spinning has been carried out on binary TiAl alloys at three Ti/Al ratios. Antiphase domains were observed in one ribbon specimen, but no significant disordering was induced by the rapid solidification as indicated by X-ray and electron diffraction analyses. Bending tests of both the ribbons and the consolidated counterparts showed a decrease in ductility with increasing Al concentration. This compositional effect can be correlated with the TiAl tetragonality (the c/a ratio) as well as the grain structure.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 81: Symposium H – High-Temperature Ordered Intermetallic Alloys II , 1986 , 481
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Lipsitt, H.A., in High-Temperature Ordered Intermetallic Alloys, Materials Research Society Symposia Proceedings, Vol. 39, ed. Koch, C.C., Liu, C.T. and Stoloff, N.S., published by Materials Research Society, Pittsburgh, Pennsylvania, 1985, pp. 351–364.Google Scholar
[2] McAndrew, J.B. and Kessler, H.D., J. Metals, 8 (1956), p. 1348.Google Scholar
[3] Marcinkowskli, M.J., Brown, N., and Fischer, R.M., Acta Metall.,9 (1961), p. 129.Google Scholar
[4] Greenberg, B.A., phys. stat. sol., 42 (1970), p. 459.Google Scholar
[5] Greenberg, B.A., phys. stat. sol., B55 (1973), p. 59.Google Scholar
[6] Shechtman, D., Blackburn, M.J., and Lipsitt, H.A., Metall. Trans., 5 (1974), p. 1373.Google Scholar
[7] Lipsitt, H.A., Shechtman, D., and Schafrik, R.E., Metall. Trans., 6A (1975), p. 1991.Google Scholar
[8] Kawabata, T., Kanai, T., and Izumi, O., Acta Metall., 33 (1985), p. 1355.Google Scholar
[9] Hug, G., Loiseau, A., and Lasalmonie, A., Phil. Mag., 54A (1986) p. 47.CrossRefGoogle Scholar
[10] Duwez, P. and Taylor, J.L., Trans. AIME, 196 (1952), p. 70.Google Scholar
[11] Ogden, H.R., Maykuth, D.J., Finlay, W.L., and Jaffee, R.I., Trans. AIME, 195 (1951), p. 1150.Google Scholar
[12] Bumps, E.S., Kessler, H.D., and Hansen, M., Trans. AIME, 196 (1952), p. 609.Google Scholar
[13] Rowe, R.G. and Amato, R.A., in Rapidly Solidified Materials, Proc. ASM Conf., Oct. 1986, Orlando, FL, F.H. Froes, publ. ASM, Metals Park, OH, 1986.Google Scholar
[14] Tsujimoto, T., Hashimoto, K., Nobuki, M., and Suga, Hiroo, Trans. Japan Inst. Metals, 27 (1986), p. 341.Google Scholar
[15] Spragins, S.V., Myers, J.R., and Saxer, R.K., Nature, 207 (1965), p. 183.Google Scholar