Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-10T08:44:37.644Z Has data issue: false hasContentIssue false
  • English
  • Français

Reactive Phase Formation in Sputter-Deposited Ni/Al Thin Films

Published online by Cambridge University Press:  15 February 2011

K. Barmak ,
C. Michaelsen ,
R. Bormann  and
G. Lucadamo
K. Barmak
Affiliation:
Department of Materials Science and Engineering, Lehigh University, Bethlehem, PA 18015
C. Michaelsen
Affiliation:
Institute for Materials Research, GKSS Research Center, D-21502 Geesthacht, Germany
R. Bormann
Affiliation:
Institute for Materials Research, GKSS Research Center, D-21502 Geesthacht, Germany
G. Lucadamo
Affiliation:
Department of Materials Science and Engineering, Lehigh University, Bethlehem, PA 18015
Get access

Abstract

We have investigated reactive phase formation in magnetron sputter-deposited Ni/Al multilayer thin films with a 3:1 molar ratio and periodicities ranging from 2.5-320 nm. In addition, we studied the transformation of a codeposited film of the same composition. We find that an amorphous phase has already formed during deposition, and that the extentof formation of this phase increases with decreasing periodicity. The first crystalline phase then nucleates from this amorphous phase upon annealing. The formation of the amorphous phase considerably reduces the driving force and explains why during subsequent reactions nucleation kinetics become important. We obtain Ni2Al9 as the first product phase during heat treatment in some cases before NiAl3 occurs. For films with modulation periods larger than 40 nm, formation of NiAI3 is a two stage process as reported earlier, with the first stage being due to nucleation and growth to coalescence of NiAl3 grains, and the second stage being the growth of NiA13 normal to the initial interface until the reactant phases are consumed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 382: Symposium G – Structure and Properties of Multilayered Thin Films , 1995 , 33
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Colgan, E. G., Mater. Sci. Rep. 5, 3 (1990).Google Scholar
2. Ma, E., Thompson, C.V., Clevenger, L.A., J. Appl. Phys. 69, 2211 (1991).Google Scholar
3. Edelstein, A.S., Everett, R.K., Richardson, G.Y., Qadri, S.B., Altman, E., Foley, J.C., Perepezko, J.H., J. Appl. Phys. 76, 7850 (1994).Google Scholar
4. Coffey, K.R., Clevenger, L.A., Barmak, K., Rudman, D.A., Thompson, C.V., Appl. Phys. Lett. 55, 852 (1989).Google Scholar
5. Thompson, C.V., J. Mater. Res. 7, 367 (1992).Google Scholar
6. Coffey, K.R., Barmak, K., Acta Metall. Mater. 42, 2905 (1994).Google Scholar
7. Clemens, B. M. and Gay, J. G., Phys. Rev. B 35, 9337 (1987).Google Scholar
8. Christian, J.W., The Theory of Phase Transformations in Metals and Alloys, (Corrected second edition, Pergamon Press, New York, 1981), p. 542 Google Scholar
9. Michaelsen, C., Wtihlert, S., Bormann, R., Mater. Res. Soc. Symp. Proc. 343, 205(1994).Google Scholar
10. Kubaschewski, O. and Alock, C. B., Metallurgical Thermochemistry, (Pergamon Press 1983), p. 302.Google Scholar