Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-10T11:53:58.231Z Has data issue: false hasContentIssue false
  • English
  • Français

Reducing density-induced CMP non-uniformity for advanced semiconductor technology nodes

Published online by Cambridge University Press:  21 August 2013

John H Zhang ,
Wei-Tsu Tseng ,
Tien Chen ,
Ben Kim ,
Philip Flaitz ,
Walter Kleemier ,
Cindy Goldberg ,
Connie Truong  and
Stephan Grunow
John H Zhang*
Affiliation:
STMicroelectronics, 2070 Route 52, Hopewell Junction, NY 12533, U.S.A.
Wei-Tsu Tseng
Affiliation:
IBM Semiconductor Research and Development Center (SRDC), 2070 Route 52, Hopewell Junction, NY 12533, U.S.A
Tien Chen
Affiliation:
IBM Semiconductor Research and Development Center (SRDC), 2070 Route 52, Hopewell Junction, NY 12533, U.S.A
Ben Kim
Affiliation:
STMicroelectronics, 2070 Route 52, Hopewell Junction, NY 12533, U.S.A.
Philip Flaitz
Affiliation:
IBM Semiconductor Research and Development Center (SRDC), 2070 Route 52, Hopewell Junction, NY 12533, U.S.A
Walter Kleemier
Affiliation:
STMicroelectronics, 2070 Route 52, Hopewell Junction, NY 12533, U.S.A.
Cindy Goldberg
Affiliation:
STMicroelectronics, 2070 Route 52, Hopewell Junction, NY 12533, U.S.A.
Connie Truong
Affiliation:
IBM Semiconductor Research and Development Center (SRDC), 2070 Route 52, Hopewell Junction, NY 12533, U.S.A
Stephan Grunow
Affiliation:
IBM Semiconductor Research and Development Center (SRDC), 2070 Route 52, Hopewell Junction, NY 12533, U.S.A
*
*Email: john.zhang@st.com, jzhan@us.ibm.com
Get access

Abstract

In this paper, a novel set of macros with line/space width from 128nm/128nm, 64nm/64nm to 32nm/32nm was designed and installed on 20nm technology-node hardware. The pitch-dependent pad erosion post Cu CMP was studied by atomic-force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) quantitatively on these macros. Two methods were investigated to reduce the difference between pitch- and density-induced CMP non-uniformity. The first is using new scheme of partial Cu plating process followed by SiCNH insulator deposition and then CMP. The second is through the selection of slurries and pads. Both results are discussed in this paper.

Keywords

CMPCudielectric
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1560: Symposium BB – Evolutions in Planarization—Equipment, Materials, Techniques and Applications , 2013 , mrss13-1560-bb01-04
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Choi, J., Wang, C., Wei, Y., Zielinski, E., Tseng, W-T, Moon, Y., Kelling, M., Economikos, L., Mater. Res. Soc. Symp. Proc., vol. 1249, 1249-E01-04 (2010)CrossRefGoogle Scholar
Zhang, J. H., Economikos, L., Tseng, W-T, Choi, J., Fang, Q., .Tang, T J, Salfelder, J., Truong, C. and Ferreira, P., Mater. Res. Soc. Symp. Proc., vol. 1249, 1249-E01-06 (2010)CrossRefGoogle Scholar
Zhang, J.H., Venigalla, R., Stoll, D. C., Wallner, J., Thompson, J. F., Sun, J., Zhuang, H., Xiao, C., Koo, J.E., Park, J. E., Kleemier, W., Barla, K., Truong, C., Chen, X., and Sampson, R., Proc. VMIC, 25, 95 (2008)Google Scholar
Zhang, J. H., Tseng, W-T., Economikos, L., Fang, Q., Zheng, J., Yang, L., Canaperi, D. F., Lofaro, M., Kim, B., Hu, C. K., Liniger, E. G., Murphy, R., Leo Tai, T. L., Kleemeier, W., Goldberg, C., Muncy, J., Chen, X. and Sampson, R. Mater. Res. Soc. Symp. Proc., vol. 1428, 12-1428-c06-03 (2012)CrossRefGoogle Scholar