Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2025-01-01T05:26:41.907Z Has data issue: false hasContentIssue false
  • English
  • Français

Segregation of Yttrium at Grain Boundaries in α-Al2O3

Published online by Cambridge University Press:  21 March 2011

Stefan Nufer ,
Wolfgang Kurtz  and
Manfred Rühle
Stefan Nufer
Affiliation:
Max-Planck-Institut für Metallforschung, Seestr. 92, 70174 Stuttgart, Germany
Wolfgang Kurtz
Affiliation:
Max-Planck-Institut für Metallforschung, Seestr. 92, 70174 Stuttgart, Germany
Manfred Rühle
Affiliation:
Max-Planck-Institut für Metallforschung, Seestr. 92, 70174 Stuttgart, Germany
Get access

Abstract

Quantitative X-ray analysis allows the investigation of yttrium-doped grain boundaries. In the present study well-defined bicrystal interfaces were characterized. The quantitative comparison of segregation at different bicrystals requires a correction of artifacts in the X-ray spectra due to mass absorption, fluorescence, and beam spread. Mean grain boundary excess values of 3 Y/nm2 and around 5 Y/nm2 were found at a ∑17 and ∑37 symmetrical grain boundary, respectively. Additionally, with the ∑17 bicrystal YAG precipitation and presence of silicon was found.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 654: Symposia AA – Structure-Property Relationships of Oxide Surfaces & Interfaces , 2000 , AA3.17.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Cho, J., Harmer, M. P., Chan, H. M., Rickman, J. M., and Thompson, A. M., “Effect of Yttrium and Lanthanum on the Tensile Creep Behavior of Aluminum Oxide,” Jour. Am. Ceram. Soc., vol. 80, pp. 1013–1017, 1997.Google Scholar
[2] Loudjani, M. K., Roy, J., Huntz, A. M., and Cortes, R., “Study by Extended X-Ray Absorption Fine-Structure Technique and Microscopy of the Chemical State of Yttrium in α-Polycrystalline Alumina,” Jour. Am. Ceram. Soc., vol. 68, pp. 559–562, 1985.Google Scholar
[3] Cawley, J. D. and Halloran, J. W., “Dopant Distribution in Nominally Yttrium-Doped Alumina,” Jour. Am. Ceram. Soc., vol. 69, pp. C195–C196, 1986.Google Scholar
[4] Bender, B., Williams, D. B., and Notis, M. R., “Investigation of Grain-Boundary Segregation in Ceramic Oxides by Analytical Scanning Transmission Electron Microscopy,” Jour. Am. Ceram. Soc., vol. 63, pp. 542–546, 1980.Google Scholar
[5] Gülgün, M. A. and Rühle, M., “Yttrium in Polycrystalline α-Alumina,” Key Engineering Materials, vol. 171–174, pp. 793–800, 2000.Google Scholar
[6] Wang, C. M., , G. S. C. III, Chan, H. M., and Harmer, M. P., “Structural Features of Y-Saturated and Supersaturated Grain Boundaries in Alumina,” Acta mater., vol. 48, pp. 2579–2591, 2000.Google Scholar
[7] Fischmeister, H. F. et al. , “Solid State Bonding of Accurately Oriented Metal/Ceramic Bicrystals in Ultrahigh Vacuum,” Rev. Sci. Instrum., vol. 64, pp. 234–242, 1993.Google Scholar
[8] Sutton, A. P. and Baluffi, R. W., Interfaces in Crystalline Materials. Oxford: Claredon Press, 1995.Google Scholar
[9] Egerton, R. F., Electron Energy-Loss Spectroscopy in the Electron Microscope. New York: Plenum Press, 1996.Google Scholar
[10] Egerton, R. F., “A Data Base for Energy-Loss Cross Sections and Mean Free Paths,” 50th Ann. Proc. Electron Microsc. Soc. Amer., pp. 1264–1265, 1992.Google Scholar
[11] Alber, U., Müllejans, H., and Rühle, M., “Improved Quantification of Grain Boundary Segregation by EDS in a Dedicated STEM,” Ultramicroscopy, vol. 69, pp. 105–116, 1997.Google Scholar
[12] Cliff, G. and Lorimer, G. W., “The Quantitative Analysis of Thin Specimens,” Jour. of Microsc., vol. 103, pp. 203–207, 1975.Google Scholar