Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-10T08:43:42.805Z Has data issue: false hasContentIssue false
  • English
  • Français

SiGeC Cantilever Micro Cooler

Published online by Cambridge University Press:  01 February 2011

Gehong Zeng ,
Ali Shakouri ,
Edward Croke ,
Yan Zhang ,
James Christofferson  and
John E. Bowers
Gehong Zeng
Affiliation:
Department of Electrical and Computer Engineering, University of California Santa Barbara, CA 93106
Ali Shakouri
Affiliation:
Baskin School of Engineering, University of California, Santa Cruz, CA 95064
Edward Croke
Affiliation:
HRL Laboratories, LLC, Malibu, California, 90265
Yan Zhang
Affiliation:
Baskin School of Engineering, University of California, Santa Cruz, CA 95064
James Christofferson
Affiliation:
Baskin School of Engineering, University of California, Santa Cruz, CA 95064
John E. Bowers
Affiliation:
Department of Electrical and Computer Engineering, University of California Santa Barbara, CA 93106
Get access

Abstract

The fabrication and characterization of SiGeC cantilever microcoolers are described. Silicon on insulator (SOI) was used as the substrate, and two layers of 3 μm p-SiGe0.07C0.0075 and 1.14 μm n-SiGe0.07C0.0075 lattice matched to silicon were grown using molecular beam epitaxy. The uni couple cooler was fabricated using conventional integrated circuit (IC) processing, and the cantilever structure was finally formed by removing the backside Si of SOI substrate by deep reactive ion etching. Devices with different n- and p-side length ratios were characterized. Cooling by 1.2K has been measured at room temperature. Modeling showed that the device performance was dominated by the smaller cooling temperature of the p-SiGeC leg of the cantilever structure. Parasitic heat conduction through the Si buffer layer is the main limitation to the device performance.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 793: Symposium S – Thermoelectric Materials 2003 - Research and Applications , 2003 , S11.3
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Shakouri, A. and Bowers, J. E.: “Heterostructure integrated thermionic coolers”, Applied Physics Lett., 1997, 71(9), pp. 1234–6.Google Scholar
2. Shakouri, A., LaBounty, C., et al., “Thermionic emission cooling in single barrier heterostructures”, Applied Physics Lett., 1999, 74(1), pp. 88–9.Google Scholar
3. Venkatasubramanian, R., E. S., , Colpitts, T., and O'Quinn, B., “Thin-film thermoelectric devices with high rom-temperature figures of merit”, Nature, 2001, vol. 413, pp. 597–602.Google Scholar
4. Gehong, Z., Shakouri, A., et al., “SiGe micro-cooler”, Electronics Lett., 1999, 35(24), pp. 2146–7.Google Scholar
5. Fan, X., Zeng, G., et al., “High cooling power density SiGe/Si microcoolers”, Electronics Letters, 2001, 37(2), pp. 126–7.Google Scholar
6. Xiaofeng, F., Gehong, Z., et al., “SiGeC/Si superlattice microcoolers”, Applied Physics Letters, 2001, 78(11), pp. 1580–2.Google Scholar
7. Min, G., Rowe, D. M., et al., “Integrated thin film thermoelectric cooler”, Electronics Letters, 1998. 34(2), pp. 222–3.Google Scholar
8. Shafai, C and Brett, M. J., “A Micro-Integrated Peltier Heat Pump for Localized On-chip Temperature Control”, 1996, CCECE’96, pp. 88–91.Google Scholar
9. Jacquot, A., Liu, W.L., Chen, G., Fleurial, J.-P., Dauscher, A., and Lenoir, B., “Fabrication and Modeling of a Thermoelectric Micro-Generator,” presented at International Conference on Thermoelectrics, Long Beach, CA, August 24–29, 2002.Google Scholar