Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-13T02:05:55.905Z Has data issue: false hasContentIssue false
  • English
  • Français

Soft Magnetism and Morphology of Fe Films by Dual Ion Beam Sputtering

Published online by Cambridge University Press:  25 February 2011

M. Nagakubo ,
T. Yamamoto  and
M. Naoe
M. Nagakubo
Affiliation:
Dept. of Physical Electronics, Tokyo Institute of Technology, 2-12-1, O-okayama, Meguro-ku, Tokyo 152, Japan.
T. Yamamoto
Affiliation:
Dept. of Physical Electronics, Tokyo Institute of Technology, 2-12-1, O-okayama, Meguro-ku, Tokyo 152, Japan.
M. Naoe
Affiliation:
Dept. of Physical Electronics, Tokyo Institute of Technology, 2-12-1, O-okayama, Meguro-ku, Tokyo 152, Japan.
Get access

Abstract

Fe films have been deposited by using dual ion beam sputtering apparatus under various conditions, and the dependence of their magnetic properties and morphology on preparation parameters such as film thickness, δt, and argon gas pressure, PAr, have been investigated in detail. The saturation magnetiza ion 4πMs of the specimen films did not change remarkably with 6t in the range of 50 ∼1000nm. However, with decrease of 6t below 50 nm, 4πMs decreased to less than 20 kG and coercivity Hc increased to more than 16 Oe. As PAr increased from 0.5 to 1.6 mTorr without ion bombardment, 4πMs decreased to less than 20 kG and Hc increased to about 20 Oe. The SEM micrographs of these films deposited at higher PAr showed the columnar structure. On the other hand, the films deposited at Yower PAr and ones bombarded by argon ions with proper kinetic energy during deposition did not present any texture and exhibited better soft magnetism. Such a morphology may be attributed to the difference in arrival energy of sputtered Fe particles to film surface and related closely to soft magnetism. It has been found that the dual ion beam sputtering method can control 4πMs and Hc with changing PAr and so prepare Fe films with superior soft magnetism by adjusting the kinetic energy of bombarding argon ions at lower PAr.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 128: Symposium A – Processing and Characterization of Materials Using Ion Beams , 1988 , 29
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Nagakubo, M., Kawano, A. and Naoe, N., Mat. Res. Soc. Symp. Proc. Vol.80, 415 (1987).10.1557/PROC-80-415CrossRefGoogle Scholar
2. Bland, R.D., Kominiak, G.J. and Mattox, D.M., J. Vac. Sci. Technol., 11, 671 (1984).10.1116/1.1312733CrossRefGoogle Scholar
3. Wu, C.T., Thin Solid Films, 64, 103 (1979).CrossRefGoogle Scholar