Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-10T08:39:10.200Z Has data issue: false hasContentIssue false

Spectrally Resolved Cathodoluminescence Determination of Dopant Diffusion In InP/InGaAsP Based Multi Quantum Well Fabry-Perot Lasers

Published online by Cambridge University Press:  10 February 2011

C. Zanotti-Fregonara
Affiliation:
CNR-MASEPC Institute, Parco Area delle Scienze, 37A, 43010 Parma, Italy
C. Ferrari
Affiliation:
CNR-MASEPC Institute, Parco Area delle Scienze, 37A, 43010 Parma, Italy
L. Lazzarini
Affiliation:
CNR-MASEPC Institute, Parco Area delle Scienze, 37A, 43010 Parma, Italy
G. Salviati
Affiliation:
CNR-MASEPC Institute, Parco Area delle Scienze, 37A, 43010 Parma, Italy
M. Meliga
Affiliation:
OTC-CSELT Laboratory, Via G Reiss Romoli 274, 10148 Torino, Italy
D. Bertone
Affiliation:
OTC-CSELT Laboratory, Via G Reiss Romoli 274, 10148 Torino, Italy
R. Y. Fang
Affiliation:
OTC-CSELT Laboratory, Via G Reiss Romoli 274, 10148 Torino, Italy
G. Morello
Affiliation:
OTC-CSELT Laboratory, Via G Reiss Romoli 274, 10148 Torino, Italy
R. Paoletti
Affiliation:
OTC-CSELT Laboratory, Via G Reiss Romoli 274, 10148 Torino, Italy
Get access

Abstract

Low temperature monochromatic cathodoluminescence (CL) spectral analyses and imaging were used to determine the widths of resistive regions (due to Fe diffusion) in multi-quantum-well (MQW) InP-based laser devices and to detect the different amount of damage induced by alternative In-situ Etching (ISE) and Reactive Ion Etching (RIE) techniques. The widths of the resistive regions were estimated by comparing the 5 K CL emission width from the MQW and the actual width as obtained by SEM investigations. Monochromatic CL also did not reveal any emission from the InP:Sn layer between semi-insulating material (Fe-doped lnp) and p-type layer (Zn-doped InP), indicating interdiffusion of Fe and Zn laterally the MQW, and the presence of substantial Sn diffusion (up to 2500 nanometers) into the substrate.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Bertone, D., Campi, R, G Morello J. Cryst. Growth 195, 624(1998)Google Scholar
[2] Yoshinaga, H, Matsumori, T and Uehara, F (1996) Jpn. J Appl. Phys. 35 2930 Google Scholar
[3] Mullin, J B, A Royle, Straughan, B W, Tufton, P J, Williams, E W (1972) J Crystal Growth 13/14 640 Google Scholar
[4] Temkin, H, Dutt, B V, Bonner, W A (1981) Appl. Phys. Lett. 38 431 Google Scholar
[5] Williams, E W, Eider, W, Astles, M G, Webb, M, Mullin, J B, Straughan, B, and Tufton, P J J (1973) Electrochem. Soc.: Solid-State Science and technology 120 1741 Google Scholar