Hostname: page-component-6bf8c574d5-qdpjg Total loading time: 0 Render date: 2025-02-22T08:15:29.938Z Has data issue: false hasContentIssue false
  • English
  • Français

Structural and Mechanical Stability of Reduced Nickel Oxide/Yttria-stabilized Zirconia Anode/Electrolyte Structures for Solid Oxide Fuel Cell Applications

Published online by Cambridge University Press:  01 February 2011

Somnath Biswas ,
N. Thangamani ,
N. T. Saraswathi ,
J. Zhang  and
S. Bandopadhyay
Somnath Biswas
Affiliation:
ffsb1@uaf.edu, College of Engineering and Mines, University of Alaska Fairbanks (UAF), Petroleum Development Laboratory, 414 Duckering Building, Fairbanks, AK, 99775, United States, 907-4746077
N. Thangamani
Affiliation:
fftn@uaf.edu, College of Engineering and Mines, Institute of Northern Engineering, University of Alaska Fairbanks (UAF), Fairbanks, AK, 99775, United States
N. T. Saraswathi
Affiliation:
fftn@uaf.edu,College of Engineering and MinesInstitute of Northern Engineering,University of Alaska Fairbanks (UAF),Fairbanks,AK,99775,United States
J. Zhang
Affiliation:
ffjz1@uaf.edu, College of Engineering and Mines, Institute of Northern Engineering, University of Alaska Fairbanks (UAF), Fairbanks, AK, 99775, United States
S. Bandopadhyay
Affiliation:
ffs0b@uaf.edu, College of Engineering and Mines, Institute of Northern Engineering, University of Alaska Fairbanks (UAF), Fairbanks, AK, 99775, United States
Get access

Abstract

Highly porous Ni-8YSZ anodes supported by a thin and dense electrolyte layer of 8YSZ have been developed for solid oxide fuel cell applications by reducing a NiO-8YSZ anode/electrolye precursor structure in a gas mixture of 5% H2-95% Ar at 800°C for selected time periods up to 8 h. It appears that 2 h of exposure to the reducing conditions is enough to reduce∼80% of NiO. XRD and SEM analyses in the reduced samples disclose the formation of the Ni-8YSZ cermet structure with desired porosity and microstructure. The porosity in the anode samples, which increases with the increase in the fraction of reduced NiO, severely affects the hardness and elastic moduli of the anode samples. Vickers indentation tests show that a hardness value of 5.5 GPa in the unreduced anode samples (12% porosity) reduces to less than 1 GPa in the 8 h reduced samples (36.68 % porosity). Similarly, a decrease of ˜44% in the Young's modulus and ˜40% in shear modulus is observed in the 8 h reduced samples through impulse excitation techniques, in comparison to the unreduced anode precursor. Since the elastic properties of fully dense Ni, NiO and YSZ are comparable to each other, the decrease in the magnitude in elastic moduli and hardness is attributed to the colossal increase in porosity as a result of the reduction of NiO in H2 atmosphere.

Keywords

ceramicelastic propertieshardness
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1098: Symposium HH – The Hydrogen Economy , 2008 , 1098-HH03-26
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Primdahl, S., Sorensen, B. F. and Mogensen, M., J. Am. Ceram. Soc. 83, 489 (2000).Google Scholar
2 Radovic, M. and Lara-Curzio, E., J. Am. Ceram. Soc. 87, 2242 (2004).Google Scholar
3 Jiang, S. P. and Chan, S. H., Mater. Sci. Tech. 20, 1109 (2004).Google Scholar
4 Wang, Y., Walter, M. E., Sabolsky, K. and Seabaugh, M. M., Solid State Ionics 177, 1517 (2006).Google Scholar
5 Nithyanantham, T., Biswas, S., Saraswathi, N. T. and Bandopadhyay, S., J. Power Sources (communicated).Google Scholar
6 Szekely, J. and Evans, J. W., Met. Trans. 2, 1699 (1971).Google Scholar
7 Radovic, M. and Lara-Curzio, E., Acta Mater. 52, 5747 (2004).Google Scholar
8 Linderoth, S. and Kuzjukevics, A., Solid Oxide Fuel Cells V, Proceedings of the Fifth International Synposium on Solid Oxide Fuel Cells (Aachen, Germany, June 1997), Vol. PV 97-40. Edited by Stimming, U., Singhal, S. C., Tagawa, H. and Lehnert, W.. The Electrochemical Society, Pennington, NJ, 1997, pp. 1076.Google Scholar
9 Kuzjukevics, A., Linderoth, S. and Grabis, J., High Temperature Electrochemistry : Ceramics and Metals, Proceedings of the 17th RisØ International Symposium on Materials Science (Roskilde, Denmark, Sep. 1996). Edited by Poulsen, F. W., Bonanos, N., Linderoth, S., Mogensen, M. and Zachau-Christiansen, B.. RisØ National Laboratory, Roskilde, Denmark, 1996, pp. 319.Google Scholar
10 Murphy, M. M., herle, J. Van, McEvoy, A. J. and Thampi, K. R., J. Electrochem. Soc. 141, L94 (1994).Google Scholar
11 Nikolopoulos, P. and Sotiropoulou, D., J. Mater. Sci. Lett. 6, 1429 (1996).Google Scholar
12 Liu, C., Lebrun, J. L. and Huntz, A. M., Mater. Sci. Eng. A 160, 113 (1993).Google Scholar
13 Selcuk, A. and Atkinson, A., J. Euro. Ceram. Soc. 17, 1523 (1997).Google Scholar