Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-10T14:04:09.606Z Has data issue: false hasContentIssue false
  • English
  • Français

Surface Modification and Neural Tissue Culture of Thin Film Electrode Materials

Published online by Cambridge University Press:  01 February 2011

Sachin Thanawala ,
Saida. P. Khan ,
Olena Palyvoda ,
Daniel. G. Georgiev ,
Ibrahim A. AlHomoudi ,
Golam Newaz  and
Gregory Auner
Sachin Thanawala
Affiliation:
Department of Biomedical Engineering.
Saida. P. Khan
Affiliation:
Department of Chemical Engineering
Olena Palyvoda
Affiliation:
Department of Electrical and Computer Engineering.
Daniel. G. Georgiev
Affiliation:
Department of Electrical and Computer Engineering.
Ibrahim A. AlHomoudi
Affiliation:
Department of Mechanical Engineering Wayne State University, Detroit, MI-48202.
Golam Newaz
Affiliation:
Department of Mechanical Engineering Wayne State University, Detroit, MI-48202.
Gregory Auner
Affiliation:
Department of Biomedical Engineering. Department of Electrical and Computer Engineering.
Get access

Abstract

Good interfaces between electrodes and neural tissue are very important in chronic in vivo stimulation/recording. In order to study the effect of electrode materials and surface structure on neural interfaces, we cultured neurons on thin films of electrode materials that are expected to be biocompatible, such as platinum, and iridium oxide.

We used both flat film surfaces and laser micro-structured ones. The laser micro-structuring consisted of creating regular arrays of micro-bumps with height of about 1μm and diameter of 2-3 microns. We have found conditions for fabrication of such micro-bumps on platinum and iridium thin films on borosilicate glass substrate (Pyrex 7740) by mask-projection irradiation with single nano-second pulses from a KrF excimer laser (λ=248nm). Laser micro-structured iridium films were coated with IrO2 by pulsed DC reactive sputtering to obtain micro-structured IrO2 films. Two types of iridium oxide films were studied: amorphous (reactively sputtered at room substrate temperature) and polycrystalline (reactively sputtered at 300°C).

Cortical neurons isolated from rat embryo brain were cultured onto these thin film surfaces. Cells were more than 98% viable as determined by trypan blue exclusion tests. Poly-D-Lysine coated surfaces were used as positive controls for cell. Regular optical and fluorescent microscopy techniques were used to image the cells after they were cultured. To differentiate between live and dead cells a viability test with fluorescein diacetate (FDA) and propidium iodide was carried out. Also, immunocytochemistry analysis of neuron cells was performed using antibody for neuron-specific enolase (NSE) staining. A qualitative and quantitative comparison was carried out between the different types of modified electrode surfaces to study the neuronal growth in order to explore the feasibility of micro-bumps as stimulating/recording neural interfaces. These results are intended for use in optimization of future electrical stimulation/recording experiments that we plan to carry out.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 872: Symposium J – Micro- and Nanosystems—Materials and Devices , 2005 , J18.8
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Humayun, M. S., Juan, E., Weiland, J. D., Dagnelie, G., Katona, S., Greenberg, R., and Suzuki, S., Vision Research 33, 2569 (1999).Google Scholar
2 Hesses, L., Schanze, T., Wilms, M., and Eger, M., Graefe's, Arch. Clin. Exp. Ophthalmol. 238, 840 (2000).Google Scholar
3 Rose, T. L. and Robblee, L. S., IEEE Trans. Biomed. Eng. 37 (11), 1118 (1990).Google Scholar
4 Weiland, J. D., Anderson, D. J. and Humayun, M. S., IEEE Trans. Biomed. Eng. 49 (12), 1574 (2002).Google Scholar
5 Beebe, X. and Rose, T. L., IEEE Trans. Biomed. Eng. 35 (6), 494 (1988).Google Scholar
6 Lee, I. S., Whang, C. N., Lee, Y. H., Lee, G. H., Park, B. J., Park, J. C., Seo, W. S. and Cui, F. Z., Thin Solid Films, 475, 332 (2005).Google Scholar
7 Clark, P., Britland, S. and Connolly, P., J. Cell Sci. 105, 203 (1993).Google Scholar
8 Braber, E. T. den, Ruijter, J. E. de, Smits, H. T. J., Ginsel, L. A., Recum, A. F. von and Jansen, J. A., Biomaterials, 7, 1093 (1996).Google Scholar
9 Horng, R. H., Wuu, D. S., Wu, L. H. and Lee, M. K., Thin Solid Films, 373, 231 (2000).Google Scholar
10 Brewer, C. J., Torricelli, J. R., Evege, E. K., and Price, P. J., J Neurosci. Res. 35, 567 (1993).Google Scholar
11 Liao, P. C., Chen, C. S., Ho, W. S., Huang, Y. S. and Tiong, K. K., Thin Solid Films, 301, 7 (1997).Google Scholar
12 Kuribayashi, K., Fujita, Y., Isige, H. and Iwanuma, T., Materials Science and Engineering B, 109 (1-3), 188 (2004).Google Scholar
13 Slavcheva, E., Vitushinsky, R., Mokwa, W. and Schnakenberg, U., J. Electrochem. Soc. 151 (7), 226 (2004).Google Scholar