No CrossRef data available.
Article contents
Synthesis and Characterization of Tb-doped AlBNO Films for Electroluminescence Devices
Published online by Cambridge University Press: 31 January 2011
Abstract
Tb-doped AlBNO (AlBNO:Tb) films with various composition ratios are investigated for luminescence layers of inorganic electroluminescence(EL) devices. Luminescence layers with a wide bandgap and a low dielectric constant are required to realize high performance of EL devices. The ultraviolet-visible radiation absorption measurement and capacitance-voltage (C-V) measurement show that the AlBNO:Tb films have wider bandgap and lower dielectric constant than ZnS which is put to practical use as the host material of the luminescence layer. Photoluminescence (PL) measurement indicates that PL intensity increases with increasing B composition ratio in the range of 5 % - 10 %. Moreover, the suppression factor of the PL intensity can be understood through the annealing experiment. The PL intensity of the film with 800 °C annealing is about 10 times larger than that of the film without annealing. X-ray photoelectron spectroscopy (XPS) measurement suggests that Tb4+ ions decrease compared with Tb3+ ions after annealing treatment. O atoms in the AlBNO:Tb film are dissociated from Tb and bonded to B atoms by annealing treatment. This suggests that decrease of Tb4+ ions is related to increase of the PL intensity.
Keywords
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2010