Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-10T08:41:46.067Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of TiO2 Nanoparticles Using Chemical Vapor Condensation

Published online by Cambridge University Press:  15 February 2011

Jie Wu ,
Guo-Ren Bai ,
Jeffrey A. Eastman ,
Guangwen Zhou  and
Vijay K. Vasudevan
Jie Wu
Affiliation:
Materials Science Division, Argonne National Laboratory Argonne, IL 60439, U.S.A.
Guo-Ren Bai
Affiliation:
Materials Science Division, Argonne National Laboratory Argonne, IL 60439, U.S.A.
Jeffrey A. Eastman
Affiliation:
Materials Science Division, Argonne National Laboratory Argonne, IL 60439, U.S.A.
Guangwen Zhou
Affiliation:
Materials Science Division, Argonne National Laboratory Argonne, IL 60439, U.S.A.
Vijay K. Vasudevan
Affiliation:
Department of Chemical and Engineering, University of Cincinnati Cincinnati, OH 45221, U.S.A.
Get access

Abstract

Nano-sized TiO2 particles are of interest for many applications, including use as photocatalysts and in heat transfer fluids (nanofluids). In the present study, TiO2 nanoparticles with controllable phase and particle size have been obtained through homogeneous gas-phase nucleation using chemical vapor condensation (CVC). The phase and particle size of TiO2 nanoparticles under various processing conditions have been characterized using x-ray diffraction and transmission electron microscopy. Chamber temperature and pressure were found to be two key parameters affecting particle phase and size. Pure anatase phase was observed for synthesis temperatures as low as 600 °C with chamber pressure varying from 20-50 Torr. When the furnace temperature was increased to 1000 °C at a pressure of 50 Torr, a mixture of anatase and rutile phases was observed, with the predominant phase being anatase. The average particle size under all the experimental conditions was observed to be less than 20 nm.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 879: Symposium Z – Chemistry of Nanomaterial Synthesis and Processing , 2005 , Z7.12
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Li, W., Shah, S.I., Sung, M. and Huang, C.-P., J. Vac. Sci. Technol. B 20, 2303 (2002)Google Scholar
2. Porter, J.F., Li, Y.-G. and Chan, C.K., Journal of Materials Science 34, 1523 (1999)Google Scholar
3. Eastman, J.A., Choi, S.U.S., Li, S., Thompson, L.J. and Lee, S., Mat. Res. Soc. Symp. Proc. 457, 3 (1997)Google Scholar
4. Choi, S.U.S., Enhancing Thermal Conductivity of Fluids with Nanoparticles. Developments and Applications of Non-Newtonian Flows, ed. Diginer, D. and Wang, H. (Am. Soc. Mech. Eng., New York, 1995), p. 99.Google Scholar
5. Nanotechnology, Vol., edited by Wolde, A.T. (Netherlands Study Center for Technology Trends (STT), The Hague, The Netherlands, 1998).Google Scholar
6. Kruis, F.E., Fissan, H. and Peled, A., J. Aerosol Sci. 29, 511 (1998)Google Scholar
7. Seifried, S., Winterer, M. and Hahn, H., Chem. Vap. Deposition 6, 239 (2000)Google Scholar
8. Chang, W., Skandan, G., Danforth, S.C. and e. al., Nanostructured Materials 6, 321 (1995)Google Scholar
9. Wu, J., Eastman, J. A. and Thompson, L.J., Applied Physics Letters, in preparation (2005).Google Scholar
10. DeVries, R.C. and Roy, R., Am. Ceram. Soc. Bull. 33, 370 (1954)Google Scholar
11. Zhang, H. and Banfield, J.F., J. Mater. Chem. 8, 2073 (1998)Google Scholar