Published online by Cambridge University Press: 01 February 2011
The temperature dependence of Si-based thin-film single junction solar cells on the phase of the intrinsic absorber is investigated in order to find the optimal absorber at high operating temperatures. For comparison, hydrogenated amorphous, protocrystalline, and microcrystalline silicon solar cells are fabricated by plasma-enhanced chemical vapor deposition and hot-wired CVD techniques. Photo J-V characteristics are measured using a solar simulator at the ambient temperature range of 25-85°C. It is found that the cells with a higher open-circuit voltage usually show lower temperature-dependent behaviors; the protocrystalline silicon solar cells provide the lowest temperature coefficient of efficiency, while the microcrystalline silicon solar cells are highly sensitive to the temperature. Therefore, protocrystalline silicon solar cells are promising for use in high temperature regions.