Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-30T23:20:41.355Z Has data issue: false hasContentIssue false
  • English
  • Français

Texture Memory Effect During Heat Treatment in the Heavily Cold Rolled Ni3Al Foils

Published online by Cambridge University Press:  26 February 2011

Masahiko Demura ,
Ya Xu ,
Kyosuke Kishida  and
Toshiyuki Hirano
Masahiko Demura
Affiliation:
DEMURA.Masahiko@nims.go.jp, National Institute for Materials Science, Fuel Cell Materials Center, 1-2-1 Sengen, Tsukuba, 305-0047, Japan, +81-29-859-2547, +81-29-859-2501
Ya Xu
Affiliation:
XU.Ya@nims.go.jp, National Institute for Materials Science, Fuel Cell Materials Center, 1-2-1 Sengen, Tsukuba, Ibaraki, 305-0047, Japan
Kyosuke Kishida
Affiliation:
k.kishida@materials.mbox.media.kyoto-u.ac.jp, Kyoto University, Department of Materials Science and Engineering, Sakyo-ku, Kyoto, 606-8501, Japan
Toshiyuki Hirano
Affiliation:
HIRANO.Toshiyuki@nims.go.jp, National Institute for Materials Science, Fuel Cell Materials Center, 1-2-1 Sengen, Tsukuba, Ibaraki, 305-0047, Japan
Get access

Abstract

Texture evolution during grain growth was examined in the 84% cold-rolled Ni3Al with a Goss texture, {110}<001>, using the electron backscatter diffraction method. By recrystallization at 873K/0.5h, the texture was disintegrated and composed of several orientations, most of which had a 40° rotation relationship about <111> to the Goss orientation. Also, a small number of the Goss grains existed. With grain growth, the Goss grains grew faster than the 40°<111> rotated grains, leading to the texture reversion to the original, Goss texture. This phenomenon can be referred to Texture memory effect. In the early stage of the grain growth, the preferential growth occurred on the Goss grains surrounded by the 40°<111> rotated grains. It can be thus ascribed to the high mobility of 40°<111> grain boundary. In the late stage, the Goss grains were adjacent to each other and the preferential growth was accelerated. It is considered that the adjacent Goss grains survived in the grain coalescence process since the boundary between them are low angle boundary having a low energy.

Keywords

microstructuretexturemetal
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II01-09
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Demura, M., Suga, Y., Umezawa, O., Kishida, K., George, E.P. and Hirano, T., Intermetallics 9, 157 (2001).10.1016/S0966-9795(00)00121-7Google Scholar
2. Demura, M., Kishida, K., Xu, Y. and Hirano, T., Mater. Sci. Forum 467–470, 447 (2004).10.4028/www.scientific.net/MSF.467-470.447Google Scholar
3. Cui, C., Demura, M., Kishida, K. and Hirano, T., J. Mater. Res. 20, 1054 (2005).10.1557/JMR.2005.0142Google Scholar
4. Demura, M., Xu, Y., Kishida, K. and Hirano, T., Acta mater., (2006) (in press).Google Scholar
5. Gottstein, G. and Shvindlerman, L.S., Grain boundary migration in metals: thermodynamics, kinetics, applications, (CRC Press 1999) pp. 349–359.Google Scholar
6. Wolf, D., Acta metall. 37, 1983 (1989).10.1016/0001-6160(89)90082-5Google Scholar
7. Vogel, S. and Klimanek, P., Mater. Sci. Forum 204–206, 449 (1996).10.4028/www.scientific.net/MSF.204-206.449Google Scholar
8. Mehnert, K. and Klimanek, P., Computational Mater. Sci. 7, 103 (1996).10.1016/S0927-0256(96)00067-5Google Scholar
9. Mehnert, K. and Klimanek, P., Scripta Mater. 35, 699 (1996).10.1016/1359-6462(96)00201-1Google Scholar
10. Gottstein, G., Acta metall. 32, 1117 (1984).10.1016/0001-6160(84)90015-4Google Scholar
11. Lee, W.B., Furley, J. and Ralph, B., J. Mater. Science 27, 3395 (1992).10.1007/BF01116042Google Scholar