Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-01-29T23:43:22.111Z Has data issue: false hasContentIssue false
  • English
  • Français

Thickness and Strain Effects on RF/Microwave Properties of BST Thin Films on NdGaO3 Substrates

Published online by Cambridge University Press:  01 February 2011

William Kurt Simon ,
E. Koray Akdogan ,
Jeffery Bellotti  and
Ahmad Safari
William Kurt Simon
Affiliation:
Ceramic and Materials Engineering, Rutgers University, Piscataway, New Jersey 08854
E. Koray Akdogan
Affiliation:
Ceramic and Materials Engineering, Rutgers University, Piscataway, New Jersey 08854
Jeffery Bellotti
Affiliation:
Navy Research Laboratory, Washington D.C., District of Columbia 20375.
Ahmad Safari
Affiliation:
Ceramic and Materials Engineering, Rutgers University, Piscataway, New Jersey 08854
Get access

Abstract

Ba0.60Sr0.40TiO3 thin films were deposited on <100> oriented NdGaO3 substrates by pulsed-laser deposition. Film thickness ranged from 20 nm to 800 nm. Microstructural features, as evaluated with AFM and FESEM, have exhibited high quality thickness dependent topography. X-ray analyses have shown consistently <110> textured films of high crystallinity. Permittivity, Q-factor, and tunability, were investigated using interdigitated capacitors in the 0.1–20 GHz range. Effect of film thickness on dielectric properties and tunability in polycrystalline <110> textured films exhibited strong thickness dependence in their elasto-dielectric properties. Tunability up to 45% was observed at moderate field levels (∼ 7 MV/m), while the Q-factors remained ≤40.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 784: Symposium C – Ferroelectric Thin Films XII , 2003 , C5.9
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Chang, W., Gilmore, C. M., Kim, W. J., Pond, J. M., Kirchoefer, S. W., Qadri, S. B., Chrisey, D. B., and Horwitz, J. S., J. Appl. Phys., 87, 3044 (2000).Google Scholar
[2] Kim, W. J., Chang, W., Quadri, S. B., Pond, J. M., Kirchoefer, S. W., Chrisey, D. B., and Horwitz, J. S., Appl. Phys. Lett., 76, 1185 (2000).Google Scholar
[3] Kim, W. J., Wu, H. D., Chang, W., Quadri, S. B., Pond, J. M., Kirchoefer, S. W., Chrisey, D. B., and Horwitz, J. S., J. Appl. Phys., 88, 5448 (2000).Google Scholar
[4] Chang, W., Kirchoefer, S. W., Pond, J. M., Horowitz, J. S., and Sengupta, L., J. Appl. Phys., 92, 1528 (2002).Google Scholar
[5] Shaw, T. M., Suo, Z., Huang, M., Liniger, E., Laibowitz, R. B., and Baniecki, J. D., Appl. Phys. Lett., 75, 2129 (1999).Google Scholar
[6] Stoney, G. G., Proc. R. Soc. London, Ser. A 82, 172 (1909).Google Scholar
[7] Gevorgian, S. S., Linner, P. L. J., and Kolberg, E. L., IEEE Trans. Microwave Theory Tech., 44, 896 (1996).Google Scholar
[8] Bellotti, J., Ph.D. Thesis, Rutgers Univeristy (2003).Google Scholar