Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-01-28T10:04:38.219Z Has data issue: false hasContentIssue false
  • English
  • Français

Transmission Electron Microscopy Investigations of an As-Processed Yttria-Stablilized zirconia on Platinum Aluminide Bond Coat

Published online by Cambridge University Press:  17 March 2011

Judith C. Yang  and
Noel T. Nuhfer
Judith C. Yang
Affiliation:
Department of Material Science and Engineering, University of Pittsburgh, Pittsburgh, PA 15261
Noel T. Nuhfer
Affiliation:
Materials Science Department, Carnegie Mellon University, Pittsburgh, PA 15261
Get access

Abstract

We examined an as-processed yttria-stabilized zirconia (YSZ) on platinum aluminide bond coat (BC), produced by electron beam physical vapor deposition, with transmission electron microscopy, including energy dispersive X-ray spectroscopy and hollow-cone diffraction. Columnar α-Al2O3 grains (∼100nm) formed at the interface between the BC and YSZ. A thin intermix (∼50nm) region was observed between the α-Al2O3 and YSZ. Hollow cone diffraction showed that the α-Al2O3 grains and the small-grained (∼10nm) YSZ near the α-Al2O3 are randomly oriented, without preferential texturing. No evidence of spinel formation was noted.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 645: Symposium M – Thermal Barrier Coatings-2000 , 2000 , M6.4.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Arnault, V., Mevrel, R., Alperine, S., Jaslier, Y., Revue-de-Metallurgie.-CahiersD'Informations-Techniques., 1999. 96: p 585–597.Google Scholar
2. Masi-Marcin, J.T.D. and Gupta, D.K., Surf. Coat. Tech., 1994. 68/69: p. 1.Google Scholar
3. Brickey, M.R. and Lee, J.L., Oxidation of Metals, 2000. 54(3/4): p. 237–254.Google Scholar
4. Pint, B.A., Wright, I.G., Lee, W.Y., Zhang, Y., Pruessner, K., and Alexander, K.B., Mater. Sci. Eng., 1998. A245: p. 201.Google Scholar
5. Unal, O., Mitchell, T.E., and Heuer, A.H., Journal of the American Ceramic Society, 1994. 77: p. 984.Google Scholar
6. Stiger, M.J., Yanar, N.M., Topping, M.G., Pettit, F.S., and Meier, G.H., Zeitschrift fuer Metallkunde, 1999. 90(12): p. 1069–1078.Google Scholar