Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-26T08:17:15.996Z Has data issue: false hasContentIssue false
  • English
  • Français

Next generation X-ray detectors for in-house XRD

Published online by Cambridge University Press:  29 February 2012

Takeyoshi Taguchi ,
Christian Brönnimann  and
Eric F. Eikenberry
Takeyoshi Taguchi*
Affiliation:
Rigaku Corporation, 3-9-12 Matsubara-cho, Akishima-shi, Tokyo, Japan
Christian Brönnimann
Affiliation:
DECTRIS Ltd., 5232 Villigen PSI, Switzerland andPaul Scherrer Institut, 5232 Villigen PSI, Switzerland
Eric F. Eikenberry
Affiliation:
DECTRIS Ltd., 5232 Villigen PSI, Switzerland
*
a)Author to whom correspondence should be addressed. Electronic mail: takey@rigaku.co.jp
Get access Rights & Permissions [Opens in a new window]

Abstract

A novel type X-ray detector, called PILATUS, has been developed at the Paul Scherrer Institut in Switzerland during the last decade. PILATUS detectors are two-dimensional hybrid pixel array detectors, which operate in single-photon counting mode. PILATUS detectors feature a very wide dynamic range (1:1 000 000), very short readout time (<3.0 ms), no readout noise, and very high counting rate (>2×106counts/s/pixel). In addition, a lower energy threshold can be set in order to suppress fluorescence background from the sample, thus a very good signal-to-noise ratio is achieved. The combination of these features for area detectors is unique and thus the PILATUS detectors are considered to be the next generation X-ray detectors. The basic building block of all the detectors is the PILATUS module having an active area of 83.8×33.5 mm2. The PILATUS 100K is a complete detector system with one module. PILATUS detector systems can have other configurations, including large area systems consisting of 20 to 60 modules that can cover up to an area of 431×448 mm2. Such large systems are mainly used for macromolecular structure determination, such as protein crystallography and small angle X-ray scattering. The PILATUS 100K detector can be easily adapted to many systems; the single-module detector is integrated to an in-house X-ray diffraction (XRD) system. Examples of XRD measurements with the PILATUS 100K detector are given.

Keywords

hybrid-pixel X-ray detectorradiation hard designdynamic rangereadout timesignal-to-noise ratio
Type
X-Ray Diffraction
Information
Powder Diffraction , Volume 23 , Issue 2 , June 2008 , pp. 101 - 105
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Brönnimann, C., Baur, R., Horisberger, R., and Schulze, C. (1998). “Pixel detector for the protein crystallography (PX) beamline,” SLS Annex report about the pixel detector development, Swiss Light Source, Paul Scherrer Institut, Villigen PSI, Switzerland, 〈http://pilatus.web.psi.ch/DATA/PDF/Jb98_pix.pdf〉.Google Scholar
Brönnimann, C., Florin, S., Linder, M., Schmitt, B., and Schulze-Briese, C. (2000). “Synchrotron beam test with a photon-counting pixel detector,” J. Synchrotron Radiat. JSYRES 7, 301–306.CrossRefGoogle ScholarPubMed
Brönnimann, C., Eikenberry, E. F., Henrich, B., Horisberger, R., Huelsen, G., Pohl, E., Schmitt, B., Schulze-Briese, C., Suzuki, M., Tomizaki, T., Toyokawa, H., and Wagner, A. (2006). “The PILATUS 1M detector,” J. Synchrotron Radiat. JSYRES 10.1107/S0909049505038665 13, 120–130.CrossRefGoogle Scholar
Kraft, P. (2005). “Characterization of the readout chip for the PILATUS 6M detector,” Diploma thesis, Institute for Particle Physics, Swiss Federal Institute of Technology (ETH Zürich), Zürich, Switzerland 〈http://pilatus.web.psi.ch/DATA/PDF/Kraft_diploma.pdf〉.Google Scholar
Taguchi, T. (2006). “A new position sensitive area detector for high-speed and high-sensitivity X-ray diffraction analysis,” Powder Diffr. PODIE2 10.1154/1.2204063 21, 97–101.CrossRefGoogle Scholar