Crystal structure of oxibendazole, C₁₂H₁₅N₃O₃

Abstract

The crystal structure of oxibendazole has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional theory techniques. Oxibendazole crystallizes in space group C2/c (#15) with a = 23.18673(22), b = 5.35136(5), c = 19.88932(13) Å, β = 97.0876(9)°, V = 2449.018(17) ų, and Z = 8. The structure consists of hydrogen-bonded layers of planar molecules parallel to the bc-plane. Strong N–H⋯N hydrogen bonds link the molecules into dimers, with a graph set R2,2(8). N–H⋯O hydrogen bonds further link these dimers into layers parallel to the bc-plane. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

I. INTRODUCTION

Oxibendazole (sold under the brand name Loditac among others) is used to protect against roundworms, threadworms, pinworms, and lungworm infestations in horses and some domestic pets. The systematic name (CAS Registry Number 20559-55-1) is methyl N-(6-propoxy-1H-benzimidazol-2-yl)carbamate. A two-dimensional molecular diagram is shown in Figure 1. As is the case with some other veterinary pharmaceuticals, we are unaware of any published X-ray powder diffraction data for this compound.

Figure 1. The 2D molecular structure of oxibendazole.

This work was carried out as part of a project (Kaduk et al., 2014) to determine the crystal structures of large-volume commercial pharmaceuticals, and include high-quality powder diffraction data for them in the Powder Diffraction File (Gates-Rector and Blanton, 2019).

II. EXPERIMENTAL AND REFINEMENT

Oxibendazole was a commercial reagent, purchased from TargetMol (Batch #143644), and was used as-received. The white/cream powder was packed into a 1.5 mm diameter Kapton capillary and rotated during the measurement at ~50 Hz. The powder pattern was measured at 295 K at beamline 11-BM (Antao et al., 2008; Lee et al., 2008; Wang et al., 2008) of the Advanced Photon Source at Argonne National Laboratory using a wavelength of 0.458200(2) Å from 0.5 to 50° 2θ with a step size of 0.001°, and a counting time of 0.1 s step⁻¹. The high-resolution powder diffraction data were collected using twelve silicon crystal analyzers that allow for high angular resolution, high precision, and accurate peak positions. A mixture of silicon (NIST SRM 640c) and alumina (NIST SRM 676a) standards (ratio Al₂O₃:Si = 2:1 by weight) was used to calibrate the instrument and refine the monochromatic wavelength used in the experiment.

The pattern was difficult to index, but a reasonable unit cell (volume corresponding to an integral number of molecules) was obtained using N-TREOR (Altomare et al., 2013). A monoclinic cell with a = 23.199, b = 5.3497, c = 19.8957 Å, β = 97.061°, V = 2450.5 Å³, and Z = 8 was obtained. The systematic absences corresponded to space groups Cc or C2/c. Since the volume of the unit cell corresponded to 8 molecules, space group C2/c was assumed, and confirmed by successful solution and refinement of the structure. A reduced cell search in the Cambridge Structural Database (Groom et al., 2016) yielded no hits. A few weak (<0.5% relative intensity) were not indexed by this cell, so the sample seems to contain at least one impurity phase.

An oxibendazole molecule was downloaded as Conformer3D_CID_4622.sdf from PubChem (Kim et al., 2019). The file was converted to a *.mol2 file using Mercury (Macrae et al., 2020). The structure was solved using Monte Carlo simulated annealing techniques as implemented in DASH (David et al., 2006), including a (010) preferred orientation coefficient. Seven of the 100 runs yielded cost factors much lower than the others. The best solution was selected for refinement. Equivalent solutions were also obtained using EXPO2014 (Altomare et al., 2013).

Rietveld refinement was carried out using GSAS-II (Toby and Von Dreele, 2013). Only the 2.0–25.0° portion of the pattern was included in the refinement (d _min = 1.058 Å). All non-H bond distances and angles were subjected to restraints, based on a Mercury/Mogul Geometry Check (Bruno et al., 2004; Sykes et al., 2011). The Mogul average and standard deviation for each quantity were used as the restraint parameters, but the standard deviations of the bond distances and angles in the propoxy side chain were decreased to 0.03 Å and 3.0°. The restraints contributed 9.0% to the final χ ². The initial model contained a small void on a twofold axis at approximately 0,0.24,1/4. Including an oxygen atom (water molecule) at this position resulted in a negative occupancy, so the atom was removed. The U _iso of the atoms in the propoxy side chain refined to very large values (>0.3 Å²), suggesting the possibility of disorder. The propoxy chain was thus modeled as a superposition of two orientations. The occupancies refined to 51/49%. The hydrogen atoms were included in calculated positions, which were recalculated during the refinement using Materials Studio (Dassault, 2021). The U _iso of the heavy atoms were grouped by chemical similarity. The U _iso for the H atoms were fixed at 1.3× the U _iso of the heavy atoms to which they are attached. A fourth-order spherical harmonic model was included in the refinement. The refined texture index was 1.044(1). The peak profiles were described using the Stephens (1999) generalized microstrain model. Initial refinements used a uniaxial (010) microstrain model. When the microstrain model was switched to generalized, the residuals decreased, but the refinement eventually diverged (even using a Jacobian rather than a Hessian least squares matrix). In the final refinement, the S_hkl coefficients were fixed at the values which yielded the best fit before divergence. The background was modeled using a 6-term shifted Chebyshev polynomial, and a peak at 5.48° 2θ to model the scattering from the Kapton capillary and any amorphous component.

The final refinement of 86 variables using 23 037 observations and 51 restraints yielded the residuals R _wp = 0.1291 and GOF = 2.47. The largest peak (1.19 Å from C14) and hole (1.62 Å from N4) in the difference Fourier map were 0.64(13) and –0.55(13) eÅ^–3, respectively. The largest errors in the difference plot (Figure 2) are in the shapes and intensities of some of the strong low-angle peaks, and reflect the imperfect profile model and the impurity peaks.

Figure 2. The Rietveld plot for the refinement of oxibendazole. The blue crosses represent the observed data points, and the green line is the calculated pattern. The cyan curve is the normalized error plot, and the red line is the background curve. The vertical scale has been multiplied by a factor of 20× for 2θ > 9.0°, and by 50× for 2θ > 17.3°. The row of blue tick marks indicates the calculated reflection positions of oxibendazole.

The crystal structure of an ordered model of oxibendazole, with one orientation of the propoxy side chain, was optimized using VASP (Kresse and Furthmüller, 1996) (fixed experimental unit cell) through the MedeA graphical interface (Materials Design, 2016). The calculation was carried out on 16 2.4 GHz processors (each with 4 GB RAM) of a 64-processor HP Proliant DL580 Generation 7 Linux cluster at North Central College. The calculation used the GGA-PBE functional, a plane wave cutoff energy of 400.0 eV, and a k-point spacing of 0.5 Å⁻¹ leading to a 5 × 1 × 5 mesh, and took ~44 h. A single-point density functional theory calculation (fixed experimental cell) and population analysis were carried out using CRYSTAL17 (Dovesi et al., 2018). The basis sets for the H, C, N, and O atoms in the calculation were those of Gatti et al. (1994). The calculations were run on a 3.5 GHz PC using 8 k-points and the B3LYP functional, and took ~1.5 h.

III. RESULTS AND DISCUSSION

The root-mean-square (rms) Cartesian displacement between the Rietveld-refined and DFT-optimized structures of the oxibendazole molecule is 0.217 Å (Figure 3); the maximum difference is 0.569 Å at the methyl group C16 at the end of the propoxy chain. The agreement is within the normal range for correct structures (van de Streek and Neumann, 2014). Because the DFT optimization required an ordered structure, only one of the two orientations of the propoxy chain was used (the one with the lower atom numbers: C13, C15, and C16). The apparent void in the experimental structure disappeared on DFT optimization. The void was located near the propoxy chains and may provide a reason for the apparent disorder. This discussion concentrates on the DFT-optimized structure. The asymmetric unit (with atom numbering) is illustrated in Figure 4. The displacement coefficients of the disordered chain are much larger than those in the rest of the molecule, consistent with the disorder. The best view of the crystal structure is down the short b-axis (Figure 5). The structure consists of hydrogen-bonded layers of planar molecules parallel to the bc-plane. The propoxy groups lie on the outer surfaces of the layers. The mean planes of the benzimidazole ring systems are approximately (510) and (5-10). The Aromatics Analyser module of Mercury indicates only two moderate-strength interactions; one of 5.35 Å along the b-axis, and the other of 6.60 Å within the hydrogen-bonded layers.

Figure 3. Comparison of the Rietveld-refined (red) and VASP-optimized (blue) structures of oxibendazole. The rms Cartesian displacement is 0.217 Å. Image generated using Mercury (Macrae et al., 2020).

Figure 4. The asymmetric unit of oxibendazole, with the atom numbering. The atoms are represented by 50% probability spheroids/ellipsoids. Image generated using Mercury (Macrae et al., 2020).

Figure 5. The crystal structure of oxibendazole, viewed down the b-axis. Image generated using Diamond (Crystal Impact, 2022).

All of the bond distances, bond angles, and torsion angles fall within the normal ranges indicated by a Mercury/Mogul Geometry Check (Macrae et al., 2020). Quantum chemical geometry optimization of the isolated oxibendazole molecule (DFT/B3LYP/6-31G*/water) using Spartan ‘18 (Wavefunction, 2020) indicated that the observed conformation of the first orientation (lower atom numbers) is the minimum-energy conformation. Both orientations of the propoxy group converged to the same local minimum. The relatively-loose packing of the propoxy groups (few short contacts) is consistent with the apparent disorder of these groups.

Analysis of the contributions to the total crystal energy of the structure using the Forcite module of Materials Studio (Dassault, 2021) suggests that the intramolecular deformation energy is dominated by angle deformation terms, as expected for a fused ring system. The intermolecular energy is dominated by van der Waals and electrostatic attractions, which in this force field analysis also include hydrogen bonds. The hydrogen bonds are better analyzed using the results of the DFT calculation.

Hydrogen bonds are prominent in the structure (Table I). Strong N6–H30⋯N5 hydrogen bonds link the molecules into dimers (Figure 6), with a graph set (Etter, 1990; Bernstein et al., 1995; Shields et al., 2000) R2,2(8). N4–H20⋯O3 hydrogen bonds further link these dimers into layers parallel to the bc-plane. The energy of the N–H⋯O hydrogen bond was calculated using the correlation of Wheatley and Kaduk (2019). C–H⋯O hydrogen bonds also contribute to the lattice energy.

Figure 6. The oxibendazole dimers, generated by the strong N–H⋯N hydrogen bonds. Image generated using Mercury (Macrae et al., 2020).

TABLE I. Hydrogen bonds (CRYSTAL17) in oxibendazole.

The volume enclosed by the Hirshfeld surface of oxibendazole (Figure 7; Spackman et al., 2021) is 299.30 Å³, 97.77% of 1/8 the unit cell volume. The packing density is thus fairly typical. The only significant close contacts (red in Figure 7) involve the hydrogen bonds. The average volume/non-hydrogen atom is 17.0 Å³.

Figure 7. The Hirshfeld surface of oxibendazole. Intermolecular contacts longer than the sums of the van der Waals radii are colored blue, and contacts shorter than the sums of the radii are colored red. Contacts equal to the sums of radii are white. Image generated by CrystalExplorer 21.5 (Spackman et al., 2021).

The Bravais–Friedel–Donnay–Harker (Bravais, 1866; Friedel, 1907; Donnay and Harker, 1937) morphology suggests that we might expect elongated morphology for oxibendazole, with [010] as the unique axis. A fourth-order spherical harmonic model was included in the refinement. The texture index was 1.044(1), indicating that preferred orientation was small in this rotated capillary specimen.

IV. DEPOSITED DATA

The powder pattern of oxibendazole from this synchrotron data set has been submitted to ICDD for inclusion in the Powder Diffraction File. The Crystallographic Information Framework (CIF) files containing the results of the Rietveld refinement (including the raw data) and the DFT geometry optimization were deposited with the ICDD. The data can be requested at pdj@icdd.com.