Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-26T08:14:39.656Z Has data issue: false hasContentIssue false
  • English
  • Français

Stress-induced phase transformations in thermally cycled superelastic NiTi alloys: in situ X-ray diffraction studies

Published online by Cambridge University Press:  09 March 2015

Efthymios Polatidis ,
Nikolay Zotov  and
Eric J. Mittemeijer
Efthymios Polatidis*
Affiliation:
Max Planck Institute for Intelligent Systems, Stuttgart 70569, Germany
Nikolay Zotov
Affiliation:
Max Planck Institute for Intelligent Systems, Stuttgart 70569, Germany
Eric J. Mittemeijer
Affiliation:
Max Planck Institute for Intelligent Systems, Stuttgart 70569, Germany University of Stuttgart, Institute for Material Science, Stuttgart 70569, Germany
*
a) Author to whom correspondence should be addressed. Electronic mail: e.polatidis@is.mpg.de
Get access Rights & Permissions [Opens in a new window]

Abstract

In situ laboratory-based and in situ synchrotron X-ray diffraction techniques were employed to study quantitatively the strain-induced austenite-to-martensite (A–M) transformation in thermally cycled (TC) superelastic NiTi alloys. The propagation of the A–M interfaces and the evolution of the microstructure were traced during uniaxial tensile loading. It was shown that the TC material exhibits localized transformation via the propagation of transformation bands. The amount of the martensite phase depends approximately linearly on the applied strain. Analysis of the broadening of the austenite diffraction lines indicates the presence of highly deformed austenite grains within the transformation bands. Analysis of the austenite diffraction-line shifts indicates that the overall lattice strain in the (retained) austenite in the transformation bands differs from that of the austenite in the adjacent untransformed regions.

Keywords

NiTiSMAin situ XRDmartensitic transformation
Type
Technical Articles
Information
Powder Diffraction , Volume 30 , Supplement S1 , June 2015 , pp. S76 - S82
Check for updates
Copyright
Copyright © International Centre for Diffraction Data 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bourke, M. A. M., Vaidyanathan, R., and Dunand, D. C. (1996). “Neutron diffraction measurement of stress-induced transformation in superelastic NiTi,” Appl. Phys. Lett. 69, 2477–2479.Google Scholar
Bouvet, C., Calloch, S., and Lexcellent, C. (2004). “A phenomenological model for pseudoelasticity of shape memory alloys under multiaxial proportional and nonproportional loadings,” Eur. J. Mech. A: Solid 23, 37–61.CrossRefGoogle Scholar
Brinson, L. C., Schmidt, I., and Lammering, R. (2004). “Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy,” J. Mech. Phys. Solids 52, 1549–1571.CrossRefGoogle Scholar
Cullity, B. D. and Stock, S. R. (Eds.) (2001). Elements of X-ray Diffraction (Prentice-Hall, New Jersey), 3rd ed., p. 360.Google Scholar
de Keijser, T. H., Langford, J. I., Mittemeijer, E. J., and Vogels, A. B. P. (1982). “Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening,” J. Appl. Crystallogr. 15, 308–314.CrossRefGoogle Scholar
Delhez, R., de Keijser, T. H., and Mittemeijer, E. J. (1982). “Determination of crystallite size and lattice distortions through X-ray diffraction line profile analysis. Recipes, methods and comments,” Fresen. Z. Anal. Chem. 312, 1–16.CrossRefGoogle Scholar
Eggeler, G., Khalil-Allafi, J., Gollerthan, S., Somsen, C., Schmahl, W., and Sheptyakov, D. (2005). “On the effect of aging on martensitic transformations in Ni-rich NiTi shape memory alloys,” Smart Mater. Struct. 14, S186.CrossRefGoogle Scholar
Funakubo, H. (Ed.) (1986). Shape Memory Alloys (Gordon & Breach, London).Google Scholar
Hammersley, A. P. (1997). FIT2D: An Introduction and Overview ESRF Internal Report, (Report ESRF98HA01T). Grenoble: ESRF.Google Scholar
Kang, G., Kan, Q., Qian, L., and Liu, Y. (2009). “Ratcheting deformation of super-elastic and shape-memory NiTi alloys,” Mech. Mater. 41, 139–153.Google Scholar
Khalil-Allafi, J., Hasse, B., Klönne, M., Wagner, M., Pirling, T., Predki, W., and Schmahl, W. W. (2004). “In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation,” Materialwiss. Werkstofftech. 35, 280–283.Google Scholar
Khalil-Allafi, J., Eggeler, G., Schmahl, W., and Sheptyakov, D. (2006). “Quantitative phase analysis in microstructures which display multiple step martensitic transformations in Ni-rich NiTi shape memory alloys,” Mater. Sci. Eng. A 438–440, 593–596.Google Scholar
Kim, K. and Daly, S. (2011). “Martensite strain memory in the shape memory alloy nickel-titanium under mechanical cycling,” Exp. Mech. 51, 641–652.Google Scholar
Klug, H. P. and Alexander, L. E. (Eds.) (1974). X-Ray Diffraction Procedures: For Polycrystalline and Amorphous Materials (Wiley, New York).Google Scholar
Koker, M. K. A., Schaab, J., Zotov, N., and Mittemeijer, E. J. (2013). “X-ray diffraction study of the reverse martensitic transformation in NiTi shape memory thin films,” Thin Solid Films 545, 71–80.Google Scholar
Lagoudas, D. C. (Ed.) (2008). Shape Memory Alloys: Modeling and Engineering Applications (Springer, New York).Google Scholar
Liu, Y., Houver, I., Xiang, H., Bataillard, L., and Miyazaki, S. (1999). “Strain dependence of pseudoelastic hysteresis of NiTi,” Metall. Mater. Trans. A 30, 1275–1282.CrossRefGoogle Scholar
Liu, Y., Laeng, J., Chin, T. V., and Nam, T. H. (2006). “Effect of incomplete thermal cycling on the transformation behaviour of NiTi,” Mater. Sci. Eng. A 435–436, 251–257.CrossRefGoogle Scholar
Matsumoto, H. (2003). “Transformation behaviour with thermal cycling in NiTi alloys,” J. Alloys Compd. 350, 213–217.Google Scholar
McCormick, P. G. and Liu, Y. (1994). “Thermodynamic analysis of the martensitic transformation in NiTi-II. Effect of transformation cycling,” Acta Metall. Mater. 42, 2407–2413.CrossRefGoogle Scholar
Melton, K. N. and Mercier, O. (1979). “Fatigue of NiTi thermoelastic martensites,” Acta Metall. 27, 137–144.Google Scholar
Mittemeijer, E. J. and Welzel, U. (Eds.) (2012). Modern Diffraction Methods (Wiley-VCH, Weinheim).Google Scholar
Miyazaki, S., Imai, T., Otsuka, K., and Suzuki, Y. (1981). “Lüders-like deformation observed in the transformation pseudoelasticity of a TiNi alloy,” Scr. Metall. 15, 853–856.CrossRefGoogle Scholar
Miyazaki, S., Igo, Y., and Otsuka, K. (1986a). “Effect of thermal cycling on the transformation temperatures of Ti-Ni alloys,” Acta Metall. 34, 2045–2051.Google Scholar
Miyazaki, S., Imai, T., Igo, Y., and Otsuka, K. (1986b). “Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys,” Metall. Trans. A 17, 115–120.Google Scholar
Nayan, N., Roy, D., Buravalla, V., and Ramamurty, U. (2008). “Unnotched fatigue behavior of an austenitic Ni–Ti shape memory alloy,” Mater. Sci. Eng. A 497, 333–340.CrossRefGoogle Scholar
Nemat-Nasser, S. and Guo, W. G. (2006). “Superelastic and cyclic response of NiTi SMA at various strain rates and temperatures,” Mech. Mater. 38, 463–474.Google Scholar
Otsuka, K. and Ren, X. (2005). “Physical metallurgy of Ti–Ni-based shape memory alloys,” Prog. Mater Sci. 50, 511–678.Google Scholar
Otsuka, K. and Shimizu, K. (1986). “Pseudoelasticity and shape memory effects in alloys,” Int. Mater. Rev. 31, 93–114.CrossRefGoogle Scholar
Pelton, A. R., Huang, G. H., Moine, P., and Sinclair, R. (2012). “Effects of thermal cycling on microstructure and properties in Nitinol,” Mater. Sci. Eng. A 532, 130–138.Google Scholar
Raghunathan, S. L., Azeem, M. A., Collins, D., and Dye, D. (2008). “In situ observation of individual variant transformations in polycrystalline NiTi,” Scr. Mater. 59, 1059–1062.Google Scholar
Roisnel, T. and Rodríguez-Carvajal, J. (2000). WinPLOTR: a Windows tool for powder diffraction patterns analysis, Paper presented at the Seventh European Powder Diffraction Conf. (EPDIC 7), Barcelona, Spain.Google Scholar
Schmahl, W. W., Khalil-Allafi, J., Hasse, B., Wagner, M., Heckmann, A., and Somsen, C. H. (2004). “Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7 at.%Ni) under extensional load with synchrotron radiation,” Mater. Sci. Eng. A 378, 81–85.Google Scholar
Shaw, J. A. and Kyriakides, S. (1997). “Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension,” Int. J. Plast. 13, 837–871.CrossRefGoogle Scholar
Sittner, P., Lukáš, P., Novák, V., Daymond, M. R., and Swallowe, G. M. (2004). “In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress,” Mater. Sci. Eng. A 378, 97–104.Google Scholar
Sittner, P., Liu, Y., and Novak, V. (2005). “On the origin of Lüders-like deformation of NiTi shape memory alloys,” J. Mech. Phy. Solids 53, 1719–1746.Google Scholar
Strnadel, B., Ohashi, S., Ohtsuka, H., Ishihara, T., and Miyazaki, S. (1995). “Cyclic stress–strain characteristics of Ti-Ni and Ti-Ni-Cu shape memory alloys,” Mater. Sci. Eng. A 202, 148–156.CrossRefGoogle Scholar
Taillard, K., Chirani, S. A., Calloch, S., and Lexcellent, C. (2008). “Equivalent transformation strain and its relation with martensite volume fraction for isotropic and anisotropic shape memory alloys,” Mech. Mater. 40, 151–170.Google Scholar
Tan, G., Liu, Y., Sittner, P., and Saunders, M. (2004). “Lüders-like deformation associated with stress-induced martensitic transformation in NiTi,” Scr. Mater. 50, 193–198.CrossRefGoogle Scholar
Tobushi, H., Ikai, A., Yamada, S., Tanaka, K., and Lexcellent, C. (1996). “Thermomechanical properties of NiTi shape memory alloys,” J. Phys. IV 6, 385–393.Google Scholar
Vaidyanathan, R., Bourke, M. A. M., and Dunand, D. C. (1999a). “Analysis of neutron diffraction spectra acquired in situ during stress-induced transformations in superelastic NiTi,” J. Appl. Phys. 86, 3020–3029.Google Scholar
Vaidyanathan, R., Bourke, M. A. M., and Dunand, D. C. (1999b). “Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction,” Acta Mater. 47, 3353–3366.Google Scholar
Vaidyanathan, R., Bourke, M. A. M., and Dunand, D. C. (2001). “Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi,” Metall. Mater. Trans. A 32, 777–786.Google Scholar
Young, M. L., Wagner, M. F. X., Frenzel, J., Schmahl, W. W., and Eggeler, G. (2010). “Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading,” Acta Mater. 58, 2344–2354.Google Scholar