The crystal structure of Na(NH4)Mo3O10·H2O has been solved by parallel tempering using the FOX software package with synchrotron powder diffraction data obtained from beamline 08B1-1 at the Canadian Light Source. Rietveld refinement, performed with the software package GSAS, yielded orthorhombic lattice parameters of a = 13.549 82(10), b = 7.618 50(6), and c = 9.302 74(7) Å (Z = 4, space group Pnma). The structure is composed of molybdate chains running parallel to the b-axis. The Rietveld refinement results were compared with density functional theory calculations performed with CRYSTAL14, and show excellent agreement with the calculated structure.

Nanocrystalline boehmite (gamma-aluminium-oxyhydroxide) is a material of industrial importance, the functionality of which follows from its crystalline microstructure. A procedure for preparing boehmite nanoparticles, comprising the formation of a precipitate by the alkalization of an aqueous solution of aluminium nitrate and subsequent hydrothermal aging, was previously elaborated. The application of an additive (maltitol or tartaric acid) to control the sizes and shapes of crystallites in the produced polycrystalline powder of boehmite was developed. The aim of this work is a study of the effect of the hydrothermal treatment time on nanocrystalline characteristics of boehmite, both in absence and in presence of the additive. The obtained materials were investigated by using X-ray diffraction (XRD) as principal technique and additionally by scanning and transmission electron microscopy. The multi-peak analysis of powder XRD patterns was applied to determine the prevalent crystallite shape, volume-weighted crystallite size distribution, and second-order crystalline lattice strain distribution being principal quantitative characteristics of the crystalline microstructure. Based on these characteristics, three types of the microstructure correlated with the production procedures were observed and discussed in detail. The nanoparticles of boehmites were found to be monocrystalline grains with characteristic habits and sizes of order of ten nanometers weakly dependent on the hydrothermal treatment time.

CSIRO Minerals is developing new technologies and approaches for the in situ recovery (ISR) of valuable metals. ISR provides opportunities to process small and/or deep deposits and could create additional revenue for conventional uneconomic mines. Unlike for conventional processing, no standard methodology exists for characterizing sample suitability for ISR. The authors are developing a workflow to understand sample and deposit amenability to ISR processing. A South Australian low-grade iron-oxide-copper-gold sulphide ore was studied. A total of 37 drill cores samples were obtained from the ore sample for detailed mineralogical and leaching characterization. A range of characterization techniques including chemical analysis, X-ray fluorescence mapping, quantitative evaluation of minerals by scanning electron microscopy, computed tomography scanning, and bulk- and micro-X-ray diffraction analyses were applied to understand the ore mineralogy. Leaching tests at 50 °C were performed on selected samples to understanding their leaching behaviour. Mineralogical characterization found that copper was present mostly as discrete secondary copper sulphides distributed in various areas and at various specimen depths, which, in theory should be readily available for leaching, provided sufficient solution access exists. Leaching results showed steady copper recovery under the conditions tested. This study provides insight into understanding the suitability of an ore for ISR processing.

This paper introduces the historical development of the symmetries for describing magnetic structures culminating in the derivation of the black and white and coloured space groups. Beginning from the Langevin model of the Curie law, it aims to show the challenges that magnetic ordering presented and how different symmetry frameworks were developed to meet them. As well as explaining core ideas, later papers will show how the different schemes are connected. With these goals in mind, the maths related is kept to the minimum required for clarity. Those wishing to learn more details are invited to engage with the references. As well as looking back and reviewing the development of magnetic symmetry over time, particular attention is spent on explaining where the concept of time-reversal has been applied. That time-reversal has different meaning in classical and quantum mechanical situations, has created confusions which continue to propagate.

The thermal decomposition of mill scale, and the effect of mill scale addition on the formation and decomposition of Silico-Ferrite of Calcium and Aluminium (SFCA) and SFCA-I iron ore sinter bonding phases, has been investigated using in situ X-ray diffraction. Application of the external standard method of quantitative phase analysis of the in situ data collected during decomposition of the mill scale highlighted the applicability of this method for the determination of the nature and abundance of amorphous material in a mineral sample. Increasing mill scale addition from 2.6 to 10.6 and to 21.2 wt% in an otherwise synthetic sinter mixture composition designed to form SFCA did not significantly affect the thermal stability ranges of SFCA-I or SFCA, nor did it significantly affect the amount of each of SFCA or SFCA-I, which formed. This was attributed to the low impurity (i.e. Mn, Mg) concentration in the mill scale, and also the transformation to hematite during heating of the wüstite and magnetite present in the mill scale, with the hematite available for reaction to form SFCA and SFCA-I.

The structure of the NiTi matrix covered by multi-layer was studied applying X-ray diffraction techniques supported by electron microscopy. Multi-layer was composed from titanium oxide (passivation) followed by mixture of the hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP) (electrophoresis). Conditions of deposition as well as sintering did not change the nominal ratio of HAp/TCP and saved their original structure. Also, the passivated NiTi matrix and with HAp/TCP-deposited layer did not change structure. However, sintering, done for HAp/TCP consolidation, introduced local differences in the lattice parameter as well as phase composition of the NiTi matrix. In consequence of that, two-steps martensitic transformation occurred in sintered NiTi/TiO2/Hap–TCP composite.