Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-11T07:47:33.523Z Has data issue: false hasContentIssue false
  • English
  • Français

Contact Point identification in robot assembly strategies under uncertainty

Published online by Cambridge University Press:  05 April 2001

C. J. Tsaprounis  and
N. Aspragathos
C. J. Tsaprounis
Affiliation:
University of Patras, Department of Mechanical and Aeronautical Engineering, Patras 26500 Greece. E-mail: tsaproun@mech.upatras.gr,aspr@mech.upatras.gr
N. Aspragathos
Affiliation:
University of Patras, Department of Mechanical and Aeronautical Engineering, Patras 26500 Greece. E-mail: tsaproun@mech.upatras.gr,aspr@mech.upatras.gr
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper a method for the reduction of the uncertainties in robotised assembly process is presented. The generated assembly strategies are based on the determination of the contact points. The assembly task is divided in two main subtasks, the initial and the main. To reduce the uncertainty of the process a deliberate misalignment of the peg is used.

This paper is focused on the determination of the position and the forces at the contact points between the peg and hole under uncertainty. The available data are the force signal retrieved from the force sensor, the geometry of the assembly parts and the geometry of the robot. The analysis presented in this paper is a part of a knowledge-based system, which generates assembly strategies under the presence of uncertainties.

Keywords

Contact pointAssembly strategiesPeg and holeUncertainty
Type
Research Article
Information
Robotica , Volume 16 , Issue 6 , November 1998 , pp. 679 - 690
Copyright
© 1998 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)