Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-11T04:00:01.307Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of a compact double-disk magneto-rheological fluid brake

Published online by Cambridge University Press:  12 February 2007

Wei Zhou ,
Chee-Meng Chew  and
Geok-Soon Hong
Wei Zhou
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 9, Engineering Drive 1, Singapore 117576, Singapore
Chee-Meng Chew*
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 9, Engineering Drive 1, Singapore 117576, Singapore
Geok-Soon Hong
Affiliation:
Department of Mechanical Engineering, National University of Singapore, 9, Engineering Drive 1, Singapore 117576, Singapore
*
*Corresponding author. E-mail: chewcm@alum.mit.edu
Get access Rights & Permissions [Opens in a new window]

Summary

This paper describes the development of a novel compact magneto-rheological (MR) fluid brake with high transmitted torque and a simple structure. The MR fluid brake has two shearing disks with an electromagnetic coil located between them. Such a structure enables the brake to have a small radial dimension and a large torque transmission capacity. In the design process, a Bingham viscoplastic model is used to predict the transmitted torque. Electromagnetic finite element analysis (FEA) is performed to assist the magnetic circuit design and structural parameters' optimization. The novel brake design is prototyped and studied. Experimental results show that a compact MR fluid brake with high transmitted torque is successfully achieved.

Keywords

Magneto-rheological (MR) fluid brakeHigh transmitted torqueCompact sizeBingham viscoplastic modelFinite element analysis (FEA)
Type
Article
Information
Robotica , Volume 25 , Issue 4 , July 2007 , pp. 493 - 500
Copyright
Copyright © Cambridge University Press 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Chew, C.-M., Hong, G.-S. and Zhou, W., “Series Damper Actuator: A Novel Force/Torque Control Actuator,” Proceedings of the IEEE-RAS/RSJ International Conference on Humanoid Robots, Los Angeles, CA (2004) pp. 533–546.Google Scholar
2. Dyke, S. J. and Spencer, B. F. Jr., “A Comparison of Semi-Active Control Strategies for the MR Damper,” Proceedings of the Intelligent Information Systems, Grand Bahama Island, Bahamas (1997) pp. 580–584.Google Scholar
3. Jolly, M. R., Bender, J. W. and Carlson, J. D., “Properties and Applications of Commercial Magnetorheological Fluids,” Proceedings of the SPIE 5th International Symposium on Smart Structures and Materials, San Diego, CA, USA (1998) pp. 262–275.Google Scholar
4. Lita, M., Popa, N. C., Velescu, C. and Vekas, L. N., “Investigations of a magnetorheological fluid damper,” IEEE Trans. Magn., 40 (2), 469–472 (2004).Google Scholar
5. Kim, J.-H. and Oh, J.-H., “Design and Analysis of Rotary MR Damper Using Permanent Magnet,” Proceedings of the 2nd IFAC Conference on Mechatronic Systems, Berkeley, CA, USA (2002) pp. 899–903.Google Scholar
6. Li, W. H. and Du, H., “Design and experimental evaluation of a magnetorheological brake,” Int. J. Adv. Manuf. Technol., 21, 508–515 (2003).Google Scholar
7. Pan, G., Matsuhisa, H. and Honda, Y., “Analytical Model of a Magnetorheological Damper and Its Application to the Vibration Control,” Proceedings of the 26th Annual Conference of the IEEE Industrial Electronics Society, Nagoya, Japan (2000) pp. 1850–1855.Google Scholar
8. Papadopoulos, C. A., “Brakes and clutches using ER fluids,” Mechatronics, 8 (7), 719–726 (1998).Google Scholar
9. Kavlicoglu, B. M., Gordaninejad, F., Evernsel, C. A., Cobanoglu, N., Liu, Y., Fuchs, A. and Korol, G., “A High-Torque Magneto-Rheological Fluid Clutch,” Proceedings of the SPIE Conference on Smart Materials and Structures, San Diego, CA, USA (2002) pp. 393–400.Google Scholar
10. Lord Corporation, Magneto-Rheological (MR) Fluid/Technology, [online]. Available http://www.lord.com/tabid/3318/Default.aspx, Sep. 3, (2006).Google Scholar
11. Carlson, J. D., LeRoy, D. F., Holzheimer, J. C. and Marjoram, R. H., “Controllable brake,” United States Patent, Patent Number: 5,842,547 (1998).Google Scholar
12. Spencer, B. F. Jr., Dyke, S. J., Sain, M. K. and Carlson, J. D., “Phenomenological model of a magnetorheological damper,” J. Eng. Mech., ASCE, 123 (3), 230–238 (1997).Google Scholar
13. Ansoft Corporation, Maxwell 2D: 2D Electromagnetic-Field Simulation for High-Performance Electromechanical Design, [online]. Available http://www.ansoft.com/products/em/max2d/, Dec. 2, (2006).Google Scholar
14. Chew, C.-M., Hong, G.-S. and Zhou, W., “Series damper actuator for force/torque control,” US Patent Provisional Application, Application No.: 60/469,825 (2004).Google Scholar
15. Takesue, N., Asaoka, H., Lin, J., Sakaguchi, M., Zhang, G. and Furusho, J., “Development and Experiments of Actuator Using MR Fluid,” Proceedings of the 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation, Nagoya, Japan (2000) pp. 1838–1843.Google Scholar
16. Li, H.-N. and Chiang, Z.-G., “Intelligent Algorithm Based Semi-Active Control for MR Damper for Structures,” Proceedings of the Fifth World Congress on Intelligent Control and Automation, Hangzhou, China (2004) pp. 2428–2432.Google Scholar
17. Dyke, S. J., Spencer, B. F., Sain, M. K. and Carlson, J. D., “Modeling and control of magnetorheological dampers for seismic response reduction,” Smart Mater. Struct., 5, 565–575 (1996).CrossRefGoogle Scholar
18. Stanway, R., “The Development of Force Actuators Using ER and MR Fluid Technology,” Proceedings of the IEE Colloquium on Actuator Technology: Current Practice and New Developments, London, UK (1996) pp. 6/1–6/5.CrossRefGoogle Scholar
19. Lord Corporation, Engineering Note: Magnetic Circuit Design, [online]. Available http://literature.lord.com/root/other/rheonetic/Magnetic_Circuit_Design.pdf Sep. 3, (2005).Google Scholar
20. Yoo, J. H. and Wereley, N. M., “Design of a high-efficiency magnetorheological valve,” J. Intell. Mater. Syst. Struct., 13 (10), 679–685 (2002).CrossRefGoogle Scholar
21. Li, W. H., Du, H. and Guo, N. Q., “Finite element analysis and simulation evaluation of a magnetorheological valve,” Int. J. Adv. Manuf. Technol., 21 (6), 438–445 (2003).Google Scholar
22. An, J. and Kwon, D. S., “Modeling of MR actuator including magnetic hysteresis” J. Intell. Mater. Syst. Struct., 14, 541–550 (2003).Google Scholar