Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Gasson, M.
Hutt, B.
Goodhew, I.
Kyberd, P.
and
Warwick, K.
2002.
Bi-directional human machine interface via direct neural connection.
p.
265.
Pons, J.L.
Rodriguez, H.
and
Rocon, E.
2004.
An evaluation of ultrasonic motors as driving technology in impedance controlled robots.
p.
4065.
Potratz, Jason
Yang, Jingzhou
Abdel-Malek, Karim
Pitarch, Esteban Peña
and
Grosland, Nicole
2005.
A Light Weight Compliant Hand Mechanism With High Degrees of Freedom.
Journal of Biomechanical Engineering,
Vol. 127,
Issue. 6,
p.
934.
Biddiss, Elaine
and
Chau, Tom
2006.
Electroactive polymeric sensors in hand prostheses: Bending response of an ionic polymer metal composite.
Medical Engineering & Physics,
Vol. 28,
Issue. 6,
p.
568.
Hillman, Michael R.
2006.
Wiley Encyclopedia of Biomedical Engineering.
Biddiss, Elaine
Beaton, Dorcas
and
Chau, Tom
2007.
Consumer design priorities for upper limb prosthetics.
Disability and Rehabilitation: Assistive Technology,
Vol. 2,
Issue. 6,
p.
346.
Nagem, Danilo A. P.
Moreira, Marco A. G.
Pereira, Guilherme A. S.
Tierra-Criollo, Carlos J.
and
Pinotti, Marcos B.
2007.
Desenvolvimento das relações interfalangeanas e metacarpo-falangeanas para os dedos durante movimentos de pinças.
Matéria (Rio de Janeiro),
Vol. 12,
Issue. 1,
p.
179.
Biddiss, Elaine
and
Chau, Tom
2007.
The roles of predisposing characteristics, established need, and enabling resources on upper extremity prosthesis use and abandonment.
Disability and Rehabilitation: Assistive Technology,
Vol. 2,
Issue. 2,
p.
71.
Biddiss, Elaine A.
and
Chau, Tom T.
2007.
Upper limb prosthesis use and abandonment.
Prosthetics & Orthotics International,
Vol. 31,
Issue. 3,
p.
236.
Dollar, Aaron M.
and
Howe, Robert D.
2007.
The SDM Hand as a Prosthetic Terminal Device: A Feasibility Study.
p.
978.
Erickson, Jeffrey E.
DeLaurentis, Kathryn J.
and
Bouzit, Mourad
2007.
A Novel Single Digit Manipulator for Prosthetic Hand Applications.
p.
1.
Lai, J C K
Schoen, M P
Gracia, A Perez
Naidu, D S
and
Leung, S W
2007.
Prosthetic devices: Challenges and implications of robotic implants and biological interfaces.
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine,
Vol. 221,
Issue. 2,
p.
173.
Yuwang Liu
Hongguang Wang
Bin Li
and
Weijia Zhou
2008.
An optimal method to determine the parameters of anthropomorphic finger based on four-link mechanism.
p.
842.
Andrianesis, Konstantinos
and
Tzes, Anthony
2008.
Design of an anthropomorphic prosthetic hand driven by Shape Memory Alloy actuators.
p.
517.
Biddiss, Elaine
and
Chau, Tom
2008.
Dielectric elastomers as actuators for upper limb prosthetics: Challenges and opportunities.
Medical Engineering & Physics,
Vol. 30,
Issue. 4,
p.
403.
Sensinger, Jonathon W.
Schultz, Aimee E.
and
Kuiken, Todd A.
2009.
Examination of Force Discrimination in Human Upper Limb Amputees With Reinnervated Limb Sensation Following Peripheral Nerve Transfer.
IEEE Transactions on Neural Systems and Rehabilitation Engineering,
Vol. 17,
Issue. 5,
p.
438.
Biddiss, Elaine
2009.
Amputation, Prosthesis Use, and Phantom Limb Pain.
p.
7.
Bundhoo, Vishalini
Haslam, Edmund
Birch, Benjamin
and
Park, Edward J.
2009.
A shape memory alloy-based tendon-driven actuation system for biomimetic artificial fingers, part I: design and evaluation.
Robotica,
Vol. 27,
Issue. 1,
p.
131.
Malhotra, Mark
and
Matsuoka, Yoky
2010.
The relationship between actuator reduction and controllability for a Robotic Hand.
p.
331.
Valderrama-Gonzalez, German D.
Gasson, Mark N.
Warwick, Kevin
and
Whalley, Benjamin J.
2010.
Prosthesis grasp reflex via peripheral nerve control — An in vitro study.
p.
1.