Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Abe, Akira
and
Komuro, Kazuma
2011.
An energy saving open-loop control technique for flexible manipulators.
p.
416.
Abe, Akira
2011.
Residual vibration suppression for robot manipulator attached to a flexible link by using soft computing techniques.
p.
2324.
Abe, Akira
and
Yoshida, Kohei
2012.
Study on residual vibration suppression for a flexible dual-manipulator.
p.
321.
Boucetta, Rahma
and
Abdelkrim, Mohamed Naceur
2012.
Computer Information Systems and Industrial Management.
Vol. 7564,
Issue. ,
p.
395.
Ha, Chang-Wan
Rew, Keun-Ho
and
Kim, Kyung-Soo
2013.
Robust Zero Placement for Motion Control of Lightly Damped Systems.
IEEE Transactions on Industrial Electronics,
Vol. 60,
Issue. 9,
p.
3857.
Abe, Akira
2013.
Minimum energy trajectory planning method for robot manipulator mounted on flexible base.
p.
1.
ABE, Akira
and
KUBOTA, Hibiki
2014.
Robust Vibration Control for Mechanical Systems by Using Evolutionary Computation.
Transactions of the Society of Instrument and Control Engineers,
Vol. 50,
Issue. 7,
p.
553.
Rahimi, H.N.
and
Nazemizadeh, M.
2014.
Dynamic analysis and intelligent control techniques for flexible manipulators: a review.
Advanced Robotics,
Vol. 28,
Issue. 2,
p.
63.
Zhong, Guoliang
Kobayashi, Yukinori
Emaru, Takanori
and
Hoshino, Yohei
2014.
Approaches based on particle swarm optimization for problems of vibration reduction of suspended mobile robot with a manipulator.
Journal of Vibration and Control,
Vol. 20,
Issue. 1,
p.
3.
Abe, Akira
2015.
Nonlinear modeling and vibration control for a flexible manipulator.
p.
1.
ABE, Akira
2015.
High-speed driving method for suppressing the residual vibration of a flexible manipulator (Simultaneous vibration control of first and second vibration modes).
Transactions of the JSME (in Japanese),
Vol. 81,
Issue. 824,
p.
14-00530.
Abe, Akira
and
Hashimoto, Kotaro
2015.
A novel feedforward control technique for a flexible dual manipulator.
Robotics and Computer-Integrated Manufacturing,
Vol. 35,
Issue. ,
p.
169.
Liao, Bolin
and
Liu, Weijun
2015.
Pseudoinverse-type bi-criteria minimization scheme for redundancy resolution of robot manipulators.
Robotica,
Vol. 33,
Issue. 10,
p.
2100.
Gao, Mingyu
Chen, Da
Yang, Yuxiang
and
He, Zhiwei
2015.
A fixed-distance planning algorithm for 6-DOF manipulators.
Industrial Robot: An International Journal,
Vol. 42,
Issue. 6,
p.
586.
Ju, Jin-yong
Li, Wei
Yang, Xue-Feng
Wang, Yu-Qiao
and
Liu, Yu-Fei
2016.
Electromechanical coupling vibration characteristics of an AC servomotor-driven translational flexible manipulator.
International Journal of Advanced Robotic Systems,
Vol. 13,
Issue. 6,
Abe, Akira
2016.
An effective trajectory planning method for simultaneously suppressing residual vibration and energy consumption of flexible structures.
Case Studies in Mechanical Systems and Signal Processing,
Vol. 4,
Issue. ,
p.
19.
Atmeh, Ghassan
and
Subbarao, Kamesh
2016.
A Dynamic Neural Network with Feedback for Trajectory Generation.
IFAC-PapersOnLine,
Vol. 49,
Issue. 1,
p.
367.
Baek, Jaemin
Jin, Maolin
and
Han, Soohee
2016.
A New Adaptive Sliding-Mode Control Scheme for Application to Robot Manipulators.
IEEE Transactions on Industrial Electronics,
Vol. 63,
Issue. 6,
p.
3628.
Abe, Akira
and
Okabe, Keisuke
2016.
Antisway Control for a Rotary Crane by Using Evolutionary Computation.
Journal of Robotics and Mechatronics,
Vol. 28,
Issue. 5,
p.
646.
Ju, Jinyong
Li, Wei
Fan, Mengbao
Wang, Yuqiao
and
Yang, Xuefeng
2017.
Nonlinear modelling and dynamic stability analysis of a flexible Cartesian robotic manipulator with base disturbance and terminal load.
Mechanical Sciences,
Vol. 8,
Issue. 2,
p.
221.