Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-28T19:12:02.116Z Has data issue: false hasContentIssue false
  • English
  • Français

The regulatory framework for wireless power transfer systems

Published online by Cambridge University Press:  20 November 2014

Christos Kalialakis Open the ORCID record for Christos Kalialakis [Opens in a new window]  and
Apostolos Georgiadis
Christos Kalialakis*
Affiliation:
Radiocommunications Laboratory, Aristotle University of Thessaloniki, GR54124 Thessaloniki, Greece EETT, Thessaloniki State Airport, GR55103 Thessaloniki, Greece
Apostolos Georgiadis
Affiliation:
Centre Tecnològic de Telecomunicacions de Catalunya-CTTC, Castelldefels 08860, Barcelona, Spain
*
Corresponding author: C. Kalialakis Email: kalialakis@ieee.org
Get access

Abstract

A survey of the regulatory framework pertinent to wireless power transfer (WPT) systems is given. Both technical (power and frequency) considerations along with health safety radiation compliance are examined. A primer on regulatory processes is also included to facilitate the understanding of the developments. The current state is analyzed and ongoing regulatory activities across the globe are discussed. Furthermore, a review of recent radiation safety studies of WPT systems is included.

Keywords

RegulationStandardizationSpectrum ManagementWireless Power TransferRadiation ExposureEnergy Harvesting
Type
Review Article
Information
Wireless Power Transfer , Volume 1 , Issue 2 , September 2014 , pp. 108 - 118
Copyright
Copyright © Cambridge University Press 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Carvalho, N.B. et al. : Wireless power transmission: R&D activities within Europe. IEEE Trans. Microw. Theory Tech., Special Issue on Wireless Power Transfer, 62 (4) (2014), 1031–1045.CrossRefGoogle Scholar
[2] Visser, H.J.; Vullers, R.J.M.: RF energy harvesting and transport for wireless sensor network applications: principles and requirements. Proc. IEEE, 101 (6) (2013), 1410–1423.CrossRefGoogle Scholar
[3] Ho, J.S. et al. : Wireless Power Transfer to Deep-Tissue Microimplants. PNAS 2014; published ahead of print May 19, 2014. doi:10.1073/pnas.1403002111.CrossRefGoogle Scholar
[4] Laughner, J.I. et al. : A fully implantable pacemaker for the mouse: from battery to wireless power. PLoS ONE 8 (10) (2013), e76291. doi:10.1371/journal.pone.0076291.CrossRefGoogle ScholarPubMed
[5] Xu, Q.; Gao, Z.; Wang, H.; He, J.; Mao, Z.-H.; Sun, M.: Batteries not included: a mat-based wireless power transfer system for implantable medical devices as a moving target. IEEE Microw. Mag., 14 (2) (2013), 63–72.CrossRefGoogle Scholar
[6] Tang, T.-B. et al. : Implementation of wireless power transfer and communications for an implantable ocular drug delivery system. Nanobiotechnol. IET, 2 (3) (2008), 72–79.CrossRefGoogle ScholarPubMed
[7] Musavi, F.; Eberle, W.: Overview of wireless power transfer technologies for electric vehicle battery charging. IET Power Electron., 7 (1) (2014), 60–66.CrossRefGoogle Scholar
[8] Shoki, H.: Issues and initiatives for practical deployment of wireless power transfer technologies in Japan. Proc. IEEE, 101 (6) (2013), 1312–1320.CrossRefGoogle Scholar
[9] Jiang, H.; Brazis, P.; Tabaddor, M.; Bablo, J.: Safety considerations of wireless charger for electric vehicles – a review paper, in 2012 IEEE Symp. Product Compliance Engineering (ISPCE), 5–7 November 2012, 1–6.CrossRefGoogle Scholar
[10] Taki, M.: Assessment of possible health risks of electro-magnetic field exposures due to emerging technologies, in, Proc. of 2013 URSI Int. Symp. on Electromagnetic Theory (EMTS), 20–24 May 2013, 3–4.Google Scholar
[11] Pinuela, M.; Yates, D.C.; Mitcheson, P.D.; Lucyszyn, S.: London RF survey for radiative ambient RF energy harvesters and efficient DC-load inductive power transfer, in 7th European Conf. on Antennas and Propagation (EuCAP), 2013, 8–12 April 2013, 2839–2843.Google Scholar
[12] Parks, A.N.; Sample, A.P.; Zhao, Y. Smith, J.R.: A wireless sensing platform utilizing ambient RF energy, in 2013 IEEE Topical Conf. Biomedical Wireless Technologies, Networks, and Sensing Systems (BioWireleSS), 20–23 January 2013, 154–156.CrossRefGoogle Scholar
[13] Hagerty, J.A.; Helmbrecht, F.B.; McCalpin, W.H.; Zane, R.; Popovic, Z.B.: Recycling ambient microwave energy with broad-band rectenna arrays. IEEE Trans. Microw. Theory Tech., 52 (3) (2004), 1014–1024.CrossRefGoogle Scholar
[14] Vyas, R.J.; Cook, B.B.; Kawahara, Y.; Tentzeris, M.M.; E-WEHP: a batteryless embedded sensor-platform wirelessly powered from ambient digital-TV signals. IEEE Trans. Microw. Theory Tech., 61 (6) (2013), 2491–2505.CrossRefGoogle Scholar
[15] Pinuela, M.; Mitcheson, P.D.; Lucyszyn, S.: Ambient RF energy harvesting in urban and semi-urban environments. IEEE Trans. Microw. Theory Tech., 61 (7) (2013), 2715–2726.CrossRefGoogle Scholar
[16] Kawahara, Y.; Tsukada, K.; Asami, T.: Feasibility and potential application of power scavenging from environmental RF signals, in IEEE Antennas and Propagation Society Int. Symp., 1–5 June 2009, 1–4.CrossRefGoogle Scholar
[17] Visser, H.J.; Reniers, A.C.F.; Theeuwes, J.A.C.: Ambient RF energy scavenging: GSM and WLAN power density measurements, in 38th European Microwave Conf., 27–31 October 2008, 721–724.CrossRefGoogle Scholar
[18] Guenda, L.; Santana, E.; Collado, A.; Niotaki, K.; Carvalho, N.B.: Georgiadis, A.: Electromagnetic energy harvesting – global information database. Trans. Emerging Telecommun. Technol., 25 (2014), 56–63.CrossRefGoogle Scholar
[19] EnOcean Alliance: Energy Harvesting Wireless Technology for Home and Building Automation. On line at http://www.enocean-alliance.org/en/enocean_technology/ Google Scholar
[20] Sasaki, S.; It's always sunny in space. Spectr. IEEE, 51 (5) (2014), 46–51.CrossRefGoogle Scholar
[21] Jaffe, P.; McSpadden, J.: Energy conversion and transmission modules for space solar power. Proc. IEEE, 101 (6) (2013), 1424–1437.CrossRefGoogle Scholar
[22] European Union: Low Voltage Directive (LVD) 2006/95/EC.Google Scholar
[23] European Union: Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the Restriction of the Use of Certain hazardous substances (RoHS) in Electrical and Electronic Equipment.Google Scholar
[24]ISO/IEC Guide 2: 2004, Standardization and Related Activities – General Vocabulary.Google Scholar
[25] Wireless Power Consortium: Available online at http://www.wirelesspowerconsortium.com/ Google Scholar
[26]Introduction to the Alliance for Wireless Power Loosely-Coupled Wireless Power Transfer System Specification Version 1.0. Available online at https://www.rezence.com/ Google Scholar
[27] Grajski, K.; Tseng, R.; Wheatley, C.: Loosely-coupled wireless power transfer: physics, circuits, standards, in 2012 IEEE MTT-S Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems and Applications (IMWS), Kyoto, Japan, 2012, 9–14.CrossRefGoogle Scholar
[28] EnOcean Alliance: Available online at http://www.enocean-alliance.org/en/home/ Google Scholar
[29] Korean Wireless Power Forum: Available online at http://kwpf.org/eng/html/main.html Google Scholar
[30] Wireless Power Management Consortium: Available online at http://wpm-c.com/ Google Scholar
[31] Global Standards Collaboration Repository: Available online at http://www.itu.int/en/ITU-T/gsc/Pages/meetings.aspx Google Scholar
[32] Global Standards Collaboration: Available online at www.gsc.etsi.org Google Scholar
[33] ICNIRP: Guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields (up to 300 GHz). Health Phys., 74 (4) (1998), 494–522.Google Scholar
[34] ICNIRP: Guidelines for limiting exposure to time-varying electric and magnetic fields (1 Hz–100 kHz). Health Phys., 99 (2010), 818–836.CrossRefGoogle Scholar
[35] IEEE Std C95.1-2005: Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. International Committee on Electromagnetic Safety, The Institute of Electrical and Electronics Engineers, New York, NY, 2005.Google Scholar
[36] FCC, Specific Absorption Rate (SAR) for Cellular Telephones: Available online at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones Google Scholar
[37] Grudzinski, E.; Trzaska, H.: Electromagnetic Field Standards and Exposure Systems, SciTech Publishing, Edison NJ 2014.Google Scholar
[38] F.C.C.: Title 47 of the Code of Federal Regulations. Part 15 RF Devices.Google Scholar
[39] European Union: EMC Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC. Off. J. Eur. Union, volume OJ L 390, 31.12.2004, p. 24–37.Google Scholar
[40] ERC Report 074: Compatibility Between Radio Frequency Identification Devices (RFID) and the Radioastronomy Service at 13 MHz, 1999.Google Scholar
[41] F.C.C.: Title 47 of the Code of Federal Regulations. Part 18 ISM.Google Scholar
[42] ISO/IEC 14543-3-10: 2012, Information Technology – Home Electronic Systems (HES) – Part 3-10: Wireless Short-Packet (WSP) Protocol Optimized for Energy Harvesting – Architecture and Lower Layer Protocols.Google Scholar
[43] Ernst, D.: Beam it down, scotty: the regulatory framework for space-based solar power. Rev. Eur. Commun. Int. Environ. Law, 22 (2013), 354–365.CrossRefGoogle Scholar
[44] Center for Devices and Radiological Health: Radio Frequency Wireless Technology in Medical Devices Guidance for Industry and Food and Drug Administration Staff, 2013.Google Scholar
[45] ECC Recommendation: Determination of the Radiated Power Through Field strength measurements in the Frequency Range from 400 MHz to 6000 MHz, ECC/REC/(12)03.Google Scholar
[46] ITU, QUESTION ITU-R 210-3/1 Wireless Power Transfer, 2012.Google Scholar
[47] ITU, Working Party 1A, Contributions on Question: 210-3/1. Online https://www.itu.int/md/meetingdoc.asp?lang=en&parent=R12-WP1A-C&question=210-3/1 Google Scholar
[48] ITU, Working Party 1A, ITU-R Report SM.2303 (in preparation): Wireless Power Transmission Using Technologies other than Radio Frequency Beam. June 2014.Google Scholar
[49] Standard EN 300 330: Radio Equipment in the Frequency Range 9 kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9 kHz to 30 MHz.Google Scholar
[50] EN 300 330-1: Available from http://portal.etsi.org/portal/server.pt/community/ERM/306?tbId=584 Google Scholar
[51] ETSI: Radio and Spectrum Matters. Available online at http://portal.etsi.org/tb.aspx?tbid=584&SubTB=584 Google Scholar
[52]CEPT Reference ETSI Liaison ECC(13)089_ETSI report to ECC#35.Google Scholar
[53]FM(14)003_Response LS ETSI TC ERM on status of EN 302 291 on SRD at 13.56 MHz.Google Scholar
[54]SE(13)114_ETSI Progress report.Google Scholar
[55] IEC, TC 69: Electric Road Vehicles and Electric Industrial Trucks. Available online at http://www.iec.ch/dyn/www/f?p=103:23:0::::FSP_ORG_ID,FSP_LANG_ID:1255,25 Google Scholar
[56] IEC, TC 100: Audio, Video and Multimedia Systems and Equipment. Available online at http://www.iec.ch/dyn/www/f?p=103:23:0::::FSP_ORG_ID,FSP_LANG_ID:1297,25 Google Scholar
[57] ISO/AWI PAS 19363: Electrically Propelled Road Vehicles – Magnetic Field Wireless Power Transfer – Safety and Interoperability Requirements. Available online at http://www.iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=64700 Google Scholar
[58] ISO/IEC JTC: On Going Work». Available online at http://jtc1info.org/?page_id=541 Google Scholar
[59] CISPR, CIS/B: Available online at http://www.iec.ch/dyn/www/f?p=103:30:0::::FSP_ORG_ID,FSP_LANG_ID:1412,25 Google Scholar
[60] CLC/TC 69X: Electrical Systems for Electric Road Vehicles. Available online at http://www.cenelec.eu/dyn/www/f?p=104:7:799968758324701::::FSP_LANG_ID,FSP_ORG_ID:25,1258145#1 Google Scholar
[61] Sasaki, K.: WPT standardization status in Japan, in EVTeC and APE Japan 2014 Conf., Yokohama, Japan, 22–24 May 2014.Google Scholar
[62] Broadband Wireless Forum Japan: Guidelines for the Use of Wireless Power Transmission/Transfer Technologies. Technical Report, TR-01 Edition 2, 2013. Available online at http://bwf-yrp.net/english/update/docs/guidelines.pdf Google Scholar
[63] Telecommunications Technology Association, Standardization: Available online at http://www.tta.or.kr/English/new/standardization/eng_ttastd_main.jsp Google Scholar
[64] Lee, H.: TTA WPT activities and proposal of revised resolution. Document GSC17-PLEN-23r2, 17th Global Standards Collaboration Meeting (GSC-17), Jeju, Korea, 13–16 May 2013.Google Scholar
[65] Schneider, J.: SAE J2954 Overview and Path Forward. Available online at: http://www.sae.org/smartgrid/sae-j2954-status_1-2012.pdf Google Scholar
[66] UL: Safety Considerations of Wireless Charger for Electric Vehicles – A Review, 2013.Google Scholar
[67] UL: Connecting to Electric Vehicle Infrastructure, 2014. Available online at http://newscience.ul.com/wp-content/uploads/sites/30/2014/04/Powering_the_New_Generation_of_Electric_Vehicles.pdf Google Scholar
[68] IEEE ISTO: Wireless Power Consortium Program. Available online at http://www.ieee-isto.org/member-programs/wireless-power-consortium Google Scholar
[69] IEEE Standards: Electric vehicle wireless power transfer. Available online at http://standards.ieee.org/about/sasb/iccom/IC13-002-03_Electric_Vehicle_Wireless_Power_Transfer.pdf Google Scholar
[70] Miyakoshi, J.: Cellular and molecular responses to radio-frequency electromagnetic fields. Proc. IEEE, 101 (6) (2013), 1494–1502.CrossRefGoogle Scholar
[71] Ding, P.-P.; Bernard, L.; Pichon, L.; Razek, A.: Evaluation of electromagnetic fields in human body exposed to wireless inductive charging system. IEEE Trans. Magn., 50 (2) (2014), 1037–1040.CrossRefGoogle Scholar
[72] European Commission: Vademecum on Gender Equality in Horizon 2020. February 2014.Google Scholar
[73] Christ, M.; Douglas, G.; Nadakuduti, J.; Kuster, N.: Assessing human exposure to electromagnetic fields from wireless power transmission. Proc. IEEE, 101 (6) (2013), 1482–1493.CrossRefGoogle Scholar
[74] Lin, J.C.: Wireless power transfer for mobile applications, and health effects [telecommunications health and safety]. IEEE Antennas Prop. Mag., I, 55 (2) (2013), 250–253.CrossRefGoogle Scholar
[75] Lin, J.C.: Wireless power transfer for cell phones or other mobile communication devices and biological implications. IEEE Microw. Mag., 14 (5) (2013) 18–22.CrossRefGoogle Scholar
[76] Lin, J.C.: Wireless Battery-Charging Technology or Energy Harvesting to Power Mobile Phones or Other Mobile Communication Devices, and Health Effects. URSI Radio Science Bulletin, No. 344, 34–36, March 2013.Google Scholar
[77] Kuster, N.: Design and exposure of wireless communication and power charging systems: design rules, levels of exposure, challenges in exposure assessment and compliance testing, in Microwave Conf. Proc. (APMC), 2012 Asia-Pacific, 4–7 December 2012, 708–710.CrossRefGoogle Scholar
[78] Chen, X.L. et al. : Human exposure to close-range wireless power transfer systems as a function of design parameters. IEEE Trans. Electromagn. Compat., vol. 56, no. 5, pp. 1027–1034, Oct. 2014.CrossRefGoogle Scholar
[79] Mizuno, K.; Miyakoshi, J.; Shinohara, N.: Coil design and dosimetric analysis of a wireless energy transmission exposure system for in vitro study, in 2012 IEEE MTT-S Int. Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications (IMWS), 10–11 May 2012, 79–82.CrossRefGoogle Scholar
[80] Hong, S.-E.; Cho, I.-K.; Choi, H.-D.; Pack, J.-K.: Numerical analysis of human exposure to electromagnetic fields from wireless power transfer systems, in IEEE Wireless Power Transfer Conf. (WPTC), 8–9 May 2014, 216–219.CrossRefGoogle Scholar
[81] Ombach, G.: Design and safety considerations of interoperable wireless charging system for automotive, in Ninth Int. Conf. Ecological Vehicles and Renewable Energies (EVER), 2014, 25–27 March 2014, 1–4.CrossRefGoogle Scholar
[82] Yuan, Q.; Ishikawa, T.: Effect of via-wheel power transfer system on human body. Wireless Power Transfer (WPT), 2013 IEEE, 15–16 May 2013, 238–241.CrossRefGoogle Scholar
[83] Noda, A.; Shinoda, H.: Safe wireless power transmission using low leakage 2D-communication sheet. ICCAS-SICE, 18–21 August 2009, 1105–1109.CrossRefGoogle Scholar
[84] Mun, J.-Y.; Seo, M.-G.; Kang, W.-G.; Jun, H.-Y.; Park, Y.-H.; Pack, J.-K.: Study on the human effect of a wireless power transfer device at low frequency, in PIERS Proc., Moscow, Russia, 19–23 August 2012, 322–324.Google Scholar
[85] Nadakuduti, J.; Lu, L.; Guckian, P.: Operating frequency selection for loosely coupled wireless power transfer systems with respect to RF emissions and RF exposure requirements. 2013 IEEE Wireless Power Transfer (WPT), 15–16 May 2013, 234–237.Google Scholar
[86] Park, S.W.; Wake, K.; Watanabe, S.: Incident electric field effect and numerical dosimetry for a wireless power transfer system using magnetically coupled resonances. IEEE Trans. Microw. Theory Tech., 61 (9) (2013), 3461–3469.CrossRefGoogle Scholar
[87] Cruciani, S.; Maradei, F.; Feliziani, M.: Assessment of magnetic field levels generated by a wireless power transfer (WPT) system at 20 kHz, in IEEE Int. Symp. Electromagnetic Compatibility (EMC), 5–9 August 2013, 259–264.CrossRefGoogle Scholar
[88] Chen, X.L.; De Santis, V.; Umenei, A.E.: Theoretical assessment of the maximum obtainable power in wireless power transfer constrained by human body exposure limits in a typical room scenario. Phys. Med. Biol., 59 (13) (2014), 3453–3462.CrossRefGoogle Scholar
[89] Sunohara, T.; Laakso, I.; Chan, K.H.; Hirata, A.: Compliance of induced quantities in human model for wireless power transfer system at 10 MHz, in Proc. 2013 URSI Int. Symp. Electromagnetic Theory (EMTS), 20–24 May 2013, 831–833.Google Scholar
[90] Sunohara, T.; Hirata, A.; Laakso, I.; Onishi, T.: Analysis of in situ electric field and specific absorption rate in human models for wireless power transfer system with induction coupling. Phys. Med. Biol., 59 (14) (2014), 3721.CrossRefGoogle ScholarPubMed
[91] Song, H.-J.; Shin, H.; Lee, H.-B.; Yoon, J.-H.; Byun, J.-K.: Induced current calculation in detailed 3-D adult and child model for the wireless power transfer frequency range. IEEE Trans. Magn., 50 (2) (2014), 1041–1044.CrossRefGoogle Scholar
[92] Hirata, A.; Ito, F.; Laakso, I.: Confirmation of quasi-static approximation in SAR evaluation for a wireless power transfer system. Phys. Med. Biol., 58 (17) (2013), N241.CrossRefGoogle ScholarPubMed
[93] Laakso, I.; Hirata, A.: Evaluation of the induced electric field and compliance procedure for a wireless power transfer system in an electrical vehicle. Phys. Med. Biol., 58 (21) (2013), 7583.CrossRefGoogle Scholar