This paper presents a novel method to improve the working bandwidth and radiation intensity of piezoelectric antenna by using external circuit. This method makes the piezoelectric antenna combined with roles of high radiation intensity and multiple resonant frequencies without changing the structural size of the piezoelectric antenna. The experimental results show that, compared with the original piezoelectric antenna, the tuning range of the resonant frequency of the piezoelectric antenna caused by the series capacitance and inductance is +13.6 and −24%, respectively. The series inductance will produce new resonance frequency, which provides a new method for the multi-band operation of the piezoelectric antenna. The LLC (series and parallel circuit) composite circuit can increase the number of resonant frequencies of the piezoelectric antenna from 1 to 3, and the S11 at the resonant frequencies are all lower than −10 dB, and the radiated magnetic field of the piezoelectric antenna is increased by 42.3% at least. This method makes the piezoelectric antenna have the dual functions of high radiation intensity and multi-band, which has great significance for broadening the application field of piezoelectric antenna.

In this paper, non-uniform meandered line shunt capacitive RF-MEMS switch is presented at an elliptical patch etched with a split-ring resonator (SRR) for satellite communication applications. The non-uniform meander line shunt capacitive is a fixed-fixed type of RF-MEMS switch that is introduced in this model antenna. The proposed antenna design is resonated at 10.46 GHz with the return loss of −37.6 dB. The performance evolution of the proposed antenna design is evaluated with and without integrated RF-MEMS switch on the proposed antenna SRR. It is observed that the proposed model at the ON-state switch resonates at 10.57 GHz frequency with the return loss of −30 dB. Similarly, at the OFF-state switch, it resonates at 10.53 GHz frequency with the return loss of −43 dB. Al3N4 (aluminum nitride) is used for the switch as a dielectric material, hence the switch attains higher isolation. The actuation voltage of 7.9 V is required for the switch to actuate from ON to OFF state. The switch attains minimum insertion and return loss which is discussed in further sections. The proposed antenna is fabricated and tested by a vector network analyzer; there is a good agreement between the simulated and measured results.

This paper aims at investigating the resonance frequencies and stability of a long Graphene Nano-Ribbon (GNR) carrying electric current. The governing equation of motion is obtained based on the Euler-Bernoulli beam model along with Hamilton’s principle. The transverse force distribution on the GNR due to the interaction of the electric current with its own magnetic field is determined by the Biot-Savart and Lorentz force laws. Using Galerkin’s method, the governing equation is solved and the effect of current strength and dimensions of the GNR on the stability and resonance frequencies are investigated.

During operation, a superconducting radio frequency cavity is cooled down to below critical superconducting temperature by liquid helium. Thus it is under external pressure by liquid helium while an ultrahigh vacuum inside. Being a niobium-made shell structure, the SRF cavity's shape and consequently the electromagnetic resonance frequency are sensitive to external load variations. A CESR-III 500MHz superconducting radio frequency cavity is illustrated to investigate this relationship. A simulation that links the calculations on mechanical structure and radio frequency electromagnetic field with the finite element code ANSYS® is demonstrated herein. The changes of electromagnetic resonance frequency associated with external loads and mechanical properties of niobium are studied systematically. A complete understanding on the mechanism is thus achieved. The computed results also indicate that the electromagnetic resonance frequency increases as the cavity is either cooled to cryogenic temperature or stretched longitudinally, while the reduction of the helium vessel pressure also raises the resonance frequency. Besides, the electromagnetic resonance frequency shift is ruled by the coefficient of thermal expansion when the cavity is cooled from room temperature to liquid helium temperature. Young's modulus and thickness of the cavity wall dominate the structure stiffness and thus also affect the frequency shift.

The dynamic Green's function due to an impulse in an infinite anisotropic medium under anti-plane deformation is derived by the method of Smirnov [1] for two-dimensional wave equation. The Green's function is inversely proportional to the time t and an effective dynamic shear modulus. It is shown that the tractions on the planes passing through the source point vanish identically. Based on the free-space Green's function, the Green's functions for wedges, semi-infinite media and strips are obtained.

This paper is to develop the background phase subtraction method to determine the resonance frequency of a two-dimensional alluvial valley subjected to an incident plane SH-wave. The scattered wave due to the alluvium can be expressed in a series of basis functions, and the associated coefficients are related to the coefficients of free field by the so-called T-matrix method. By applying the resonance scattering theory, the effects among all normal modes can be decoupled and hence one can obtain the phase shift of each eigen partial wave. Similarly, the phase shift of each eigen partial wave due to a canyon with the same geometrical shape of the alluvium can be determined, and is recognized as the background effect. Furthermore, based on the phase represented scattering matrix, the resonance frequencies of each normal mode and its overtones can be determined by the subtraction of the associated phase dependent function due to the canyon from that due to the alluvium.