Self-localization in highly dynamic environments is still a challenging problem for humanoid robots with limited computation resource. In this paper, we propose a dual-channel unscented particle filter (DC-UPF)-based localization method to address it. A key novelty of this approach is that it employs a dual-channel switch mechanism in measurement updating procedure of particle filter, solving for sparse vision feature in motion, and it leverages data from a camera, a walking odometer, and an inertial measurement unit. Extensive experiments with an NAO robot demonstrate that DC-UPF outperforms UPF and Monte–Carlo localization with regard to accuracy.

Wireless Sensor Network (WSN) localization has shown a growing research interest, thanks to the expected proliferation of WSN applications. This work is focused on indoor localization of a mobile robot in a WSN using only inter-node range measurements, which are estimated by radio frequency signal strength attenuation. These measurements are affected by different sources of uncertainty that make them highly noisy and unreliable. The proposed approach makes use of fuzzy logic for modeling and dealing with such uncertain information. Besides, the position estimation is enhanced using a rough description of indoor environment. The experiments show that the proposed localization approach (i) is fault-tolerant, (ii) results feasible in low-density WSNs, and (iii) provides better position estimations than well-known localization methods when the position measurements are affected by high uncertainty.

This paper presents a global ultrasonic system with selective activation algorithm for autonomous navigation of an indoor mobile robot. The global ultrasonic system consists of several ultrasonic transmitters fixed at reference positions in global coordinates and two receivers at moving coordinates of a mobile robot. By activating the ultrasonic transmitters through an radiofrequency (RF) channel, the robot is able to obtain distance information to the reference positions and localize itself in the global coordinates. Due to limitations in signal strength and beam width, the ultrasonic signals from some transmitters may not be delivered to the robot and the ultrasonic data become invalid. In order to improve the effectiveness of the global ultrasonic system, a so-called selective activation algorithm is developed. Based on the current position of the robot, the selective activation calls a proper ultrasonic transmitter and generates valid ultrasonic data at every sampling instant, resulting in faster, more accurate response for self-localization than does simple sequential activation. Path-following control experiments are conducted to verify the effectiveness of the self-localization based on the proposed selective activation algorithm with the global ultrasonic system.

Autonomous navigation of an indoor mobile robot, using the global ultrasonic system, is presented in this paper. Since the trajectory error of the dead-reckoning navigation increases significantly with time and distance, the autonomous navigation system of a mobile robot requires self-localization capa-bility in order to compensate for trajectory error. The global ultrasonic system, consisting of four ultrasonic generators fixed at a priori known positions in the work space and two receivers mounted on the mobile robot, has a similar structure to the well-known satellite GPS(Global Positioning System), which is used for the localization of ground vehicles. The EKF (Extended Kalman Filter) algorithm is utilized for self-localization and autonomous navigation, based on the self-localization algorithm is verified by experiments performed in this study. Since the self-localization algorithm is efficient and fast, it is appropriate for an embedded controller of a mobile robot.