The dehydroxylation of a series of the kaolinite clay minerals, kaolinite, halloysite and dickite, has been investigated by Fourier transform in situ infrared emission spectroscopy over a temperature range of 100 to 800°C at both 50 and 5° intervals. Excellent correspondence was obtained between the high temperature emission spectra and FTIR absorption spectra of the quenched clay mineral phases. The major advantage of the technique lies in the ability to obtain vibrational spectroscopic information in situ at the elevated temperature. Dehydroxylation at a number of temperatures was determined by the loss of intensity of hydroxyl bands as indicated by intensity changes of the 3550 cm−1 to 3750 cm−1 emission spectra. As with all clay minerals, kaolinite clay mineral dehydroxylation is structure dependent. No clay phase changes occur until after dehydroxylation takes place. The kaolinite clay mineral loses the inner sheet and inner hydroxyl groups simultaneously, whereas dickite and halloysites are shown to lose the outer hydroxyls, as evidenced by the intensity loss of the ~3684 cm−1 peak, before the inner hydroxyl groups as determined by the intensity loss of the 3620 cm−1 peak. Evidence for a high temperature stable hydroxyl band at 3730 cm−1 for dickite and halloysite was obtained. This band is attributed to the formation of a silanol group formed during the dehydroxylation process. It is proposed that the dehydroxylation process for kaolinite takes place homogenously and involves 2 mechanisms. The dehydroxylation of dickite and halloysite takes place in steps, with the first hydroxyl loss taking place homogenously and the second inhomogenously.

Livestock plays a crucial role in food and nutrition security. However, livestock production accounts for 0.18 of global greenhouse gas emissions. India has one of the highest livestock densities globally, mainly produced under traditional systems. Specifically, the emission and particularly nitrogen losses from cattle in traditional systems cannot be ignored. Nitrogen emission is substantial when cattle roam free and waste is not collected or managed efficiently. This paper reviews the literature to piece together the available information on nitrogen emissions from cattle in India to synthesize the evidence, identify gaps and contribute to further understanding of the problem. At the same time, the paper highlights the solutions to reduce nitrogen pollution from cattle production in India. The main findings are that most cattle in India are not reared to provide meat protein. The implication is that reactive nitrogen per capita consumption is lower than most developed countries. However, there are substantial inefficiencies in feed conversion, feed nitrogen use and manure management in India. As a result, nitrogen losses and wastage are considerable in the different production systems. Furthermore, the review suggests that social, cultural and economic factors such as convergent social behaviour, urbanization, regulations, changing consumption patterns, the demand for cheap fuel sources, culture and religion influence the production systems and, consequently, the emissions from livestock. Suggested solutions to reduce nitrogen pollution from cattle production in India are improving livestock productivity, adopting better feeding, manure and pasture management practices and using behavioural nudges.

This article is devoted to the assessment of trends of atmospheric air pollution and atmospheric impacts on the environment in the oases of the Thala Hills, Enderby Land, East Antarctica. Estimates of annual emissions of SO2, nitrogen oxides (NOx), inhalable particulate matter with a diameter of ≤ 10 μm (PM10) and CO and their dynamics over 56 years of Thala Hills exploration are given, as well as levels of surface air concentrations of SO2, NOx, PM10 and PM10 atmospheric depositions using air dispersion modelling. It is shown, in particular, that average annual emissions of NOx, PM10 and CO peaked in the early 1990s and have decreased 30.9 times by now. Sulphur dioxide emissions were highest in the late 1960s–late 1970s and decreased 270 times since then. Results of comparisons of modelled air concentrations and depositions with the available data on the measurement of surface air pollutant concentrations and atmospheric depositions are presented. Sources of uncertainties in the estimates of emissions, ground-level concentrations and depositions are described. Proposed approaches can be used to assess the cumulative impacts of ongoing and planned activities on atmospheric air and on other components of the environment through assessing the atmospheric air in the Antarctic Treaty area.

A practical method to evaluate quantitatively the uniformity of fuel/air mixing is essential for research and development of advanced low-emission combustion systems. Typically, this is characterised by measuring an unmixedness parameter or a uniformity index. An alternative approach, based on the fuel/air equivalence ratio distribution, is proposed and demonstrated in a simple methane/air venturi mixer. This approach has two main advantages: it is correlated with the fuel/air mixture combustion temperature, and the maximum temperature variation caused by fuel/air non-uniformity can be estimated. Because of these, it can be used as a criterion to check fuel/air mixing quality, or as a target for fuel/air mixer design with acceptable maximum temperature variation. For the situations where the fuel/air distribution non-uniqueness issue becomes important for fuel/air mixing check or mixer design, an additional statistical supplementary criterion should also be used.

Over the last decade, extensive research effort has been placed on developing methane mitigation strategies in ruminants. Many disciplines on animal science disciplines have been involved, including nutrition and physiology, microbiology and genetic selection. To date, few of the suggested strategies have been implemented because: (1) methane emissions currently have no direct or indirect economic value for farmers, with no financial incentive to change practices and (2) most strategies have limited, or no, long-term effects. Consequently, there is a fundamental need for research on methane mitigation strategies across disciplines. Coordinated international initiatives similar to METHAGENE could represent highly relevant coordination tool of collaboration between countries, facilitating knowledge exchange, sharing concerns and building future collaborations.

With good combustion characteristics, hydrogen has been developing as a clean alternative fuel of engines. This study is to develop a diesel/hydrogen dual fuel engine. The hydrogen was added at inlet port in a 4-cylinder direct injection turbocharged diesel engine with an EGR (Exhaust Gas Recirculation) system to investigate engine performance and exhaust pollutant. The measured items are composed of the gas pressure of cylinder, crank angle, consumption rate of diesel, consumption rate of hydrogen, air flow rate, emissions (HC, CO2, NOX, and Smoke), and so on. The authors analyze how the addition of hydrogen with EGR system influences the engine performance and emissions. The diesel/hydrogen dual fuel turbocharged engine can increase the brake thermal efficiency with a greater decrease in emissions compared with the turbocharged diesel engine. Furthermore, the authors little altered the engine structure to get the positive effect of energy saving and pollutant decreasing.

Recently, the issue of sustainable resource management has been increasingly recognized.Economic growth of human activity is associated with a rapid rise in the use of resourcesin our economy, and society has a potential environmental impact. The UNEP InternationalResource Panel (IRP) pointed out the importance of decoupling resource use and negativeenvironmental impacts from economic activity (UNEP IRP 2011). In order tooptimize the material cycles and increase resource efficiency, material flow analysis(MFA) is a powerful tool to understand the resource consumption and material cycle in thenational economy. In this study, we present the results of global material flow analysisof nickel, which is one of the important resources for reducing energy use andCO2 emission inour society, and discuss the importance and possibility of controlling its resourcelogistics. This study also introduces the challenge of identifying the land-use changes innickel mining sites by a remote-sensing technique, and knowledge to increase the resourceefficiency in metal recycling based on the metallurgical thermodynamic approach. Theresults indicated the importance of recovery of nickel in recycling policies forend-of-life (EoL) vehicles and constructions. Improvement in EoL sorting technologies andimplementation of designs for recycling/disassembly at the manufacturing phase are needed.Possible solutions include development of sorting processes for steel scrap andintroduction of easier methods for identifying the composition of secondary resources.Recovery of steel scrap with a high alloy content will reduce primary inputs of alloyingelements and contribute to more efficient resource use.

A total of 200 crossbred pigs (castrated males and females) were used in five replicates to evaluate the influence of rearing conditions for fattening pigs on growth performance, manure production and gaseous emissions. Approximately at 36 kg body weight (BW), littermates were allocated to either a conventional (fully slatted floor, 0.65 m2/pig, considered as control, CON) or an alternative (sawdust bedding, 1.3 m2/pig, with free access to an outdoor area 1.1 m2/pig, OUT) system, until slaughter at approximately 115 kg BW. Pigs had free access to standard growing and finishing diets. Manure was stored as slurry below the slatted floor in the CON system and as litter, for the inside area, or slurry and liquid, for the outside area, in the OUT system. The amount and composition of manure were determined at the end of each replicate. Ammonia emission from the rooms was measured continuously. Dust and odour concentrations were measured in replicates 1 and 2, and CH4, N2O and CO2 emissions were measured in replicate 3. Compared with the CON, the OUT pigs exhibited a faster growth rate (+8%, P < 0.001) due to their greater feed intake (+0.21 kg/day, P < 0.01), resulting in a heavier BW (+7.3 kg, P < 0.001) and a lower lean meat content (−1.6% points, P < 0.001) at slaughter. The total amount of manure produced per pig was similar in both systems (380 kg/pig), but because of the contribution of sawdust, dry matter (DM) content was higher (P < 0.001) and concentrations in N, P, K, Cu and Zn in DM were lower (P < 0.001) in manure from the OUT than from the CON system. In the OUT system, most of the manure DM (70%) was collected indoor, corresponding mostly to the contribution of the sawdust, and most of the manure water (70%) was collected outdoor. Pigs excreted indoor about 60% and 40% of urine and faeces, respectively. Ammonia emission from the room was lower for the OUT system, whereas total NH3 emissions, including the outdoor area, tended to be higher (12.0 and 14.1 g/day N-NH3 per pig for CON and OUT, respectively). Nitrous oxide emission was higher (1.6 and 4.6 g/day N-N2O per pig for CON and OUT, respectively) and methane emission was lower (12.1 and 5.9 g/day per pig for CON and OUT, respectively), for the OUT compared with the CON system.

CH3Cl emissions by freshly harvested tubers of 61 potato cultivars ranged from less than 4 to 650 ng g−1 f. wt d−1. In experiments with Anna, the cultivar displaying the highest release rate, maximum emission of CH3Cl occurred at 20°C but the rate diminished after 48 h, a decrease due in part to inhibition of CH3Cl release by the accumulation of CH3Cl in the headspace. In 1995 and 1996, CH3Cl emission by tubers was first detectable 6 wk before the normal harvest date. If tubers were stored at 20°C immediately following harvest, release attained a maximum of 350 ng g−1 f. wt d−1 about 4 d after harvest, falling to less than 4 ng g−1 f. wt d−1 within 3 wk of harvest. On storage at 6°C post-harvest, maximum release of CH3Cl (c. 600 ng g−1) was delayed until 5 wk after harvest and release fell below 4 ng g−1 f. wt d−1 after 200 d. Release of CH3Cl was not significantly affected by cutting or bruising tuber tissue, and CH3Cl biosynthesis occurred in both core and superficial tissues of the tuber. The S-methyl group of either L- or D-methionine acted as a precursor of CH3Cl in sliced tubers, but the methylating system was specific for Cl−. An isotope dilution technique using C2H3Cl demonstrated that the amount of CH3Cl metabolized by the intact tuber was approximately 36% of the net release. However, investigations with 14CH3Cl showed that only a small proportion (7%) of the CH3Cl metabolized was fixed in involatile form in the tuber. In both skin and core tissues, fixed 14C was located primarily (80%) in the fraction soluble in phosphate buffer, but the specific activity of skin tissue was about twice that of core tissue. Autoradiography demonstrated that 14C fixation in the tuber was greatest within the lenticels, possibly indicating a microflora adapted to use the locally high concentrations of CH3Cl. Significant 14C fixation was also associated with the periderm but was not attributable to labelling of the O-methyl groups of the phenolic components of suberin. Within the core of the tuber, 14C fixation was located primarily in the phloem, pith and medullary rays.