The present work describes a unique planar low-profile wideband circularly polarized Multiple-Input and Multiple-Output (MIMO) antenna operating in the X-band, with pattern and polarization diversity over the entire axial-ratio bandwidth (ARBW). The design is unique in the sense that a simple grounded stub introduced between two linearly polarized monopole antennas has been used to realize wideband circular polarization, pattern diversity, and high isolation between antennas. The ARBW of the MIMO antenna is 2.45 GHz (8.11–10.56) 3 dB and its impedance matching bandwidth is 3.52 GHz (8.07–11.59). The isolation is better than 20 dB. The antenna can be easily adapted to operate other frequency bands by simple frequency scaling. It has been fabricated on an FR-4 substrate and its performance has been compared against several existing available antennas.

In this work, a new compact, low profile, frequency, and end-fire pattern reconfigurable antenna is presented. The proposed antenna consists of four parasitic elements and an electric-inductive-capacitive (ELC) resonator enclosed with a closed ring resonator (CRR). The reconfigurability in the proposed antenna is achieved with the help of five PIN diodes (D1–D5) embedded on the top surface of the substrate. The diode (D1) is implanted between ELC and CRR resonators for frequency reconfigurability. The other four diodes (D2–D5) are implanted between the ground plane and four parasitic elements to control the electrical length of the ground plane to achieve pattern diversity. The ground plane and parasitic elements steer the primary omni-directional beam to bi-directional and uni-directional end-fire radiation at multiple frequencies. The proposed antenna exhibits multiband operation and end-fire pattern diversity depending upon the different states of PIN diodes. The overall size of the proposed antenna is 0.20λ0× 0.17λ0× 0.009λ0, where λ0 is calculated at the lowest resonance frequency. The impedance bandwidth of the antenna ranges from 1.45 to 26.22%, while peak gain varies from 0.86 to 3.86 dBi depending upon the state of operation. The measured results are in agreement with the simulated results, which confirm the frequency and pattern diversity performance of the antenna. The proposed antenna can be used in back-to-back repeater systems.