One of the basic parameters of a charge coupled device (CCD) camera is its gain, that is, the number of detected electrons per output Analogue to Digital Unit (ADU). This is normally determined by finding the statistical variances from a series of flat-field exposures with nearly constant levels over substantial areas, and making use of the fact that photon (Poisson) noise has variance equal to the mean. However, when a CCD has been installed in a spectroscopic instrument fed by numerous optical fibres, or with an echelle format, it is no longer possible to obtain illumination that is constant over large areas. Instead of making do with selected small areas, it is shown here that the wide variation of signal level in a spectroscopic ‘flat-field’ can be used to obtain accurate values of the CCD gain, needing only a matched pair of exposures (that differ in their realisation of the noise). Once the gain is known, the CCD readout noise (in electrons) is easily found from a pair of bias frames. Spatial stability of the image in the two flat-fields is important, although correction of minor shifts is shown to be possible, at the expense of further analysis.

The calibration pipeline of the level zero images obtained from the Magneto-Optical filters at Two Heights (MOTH II) instrument is presented. MOTH II consists of two 20 cm aperture instruments, each using a Magneto-Optical Filter (MOF): one at 5896 Å (Na D2-line), the other one at 7700 Å (K I-line). MOTH II instruments thus provide full disk line-of-sight Doppler velocity and magnetic field measurements at two heights in the solar atmosphere. The developed MOTH II pipeline employs a set of standard calibration corrections, a correction for signal leakage, due to the non-ideal behavior of the polarizers, and the geometrical registration between the eight images acquired by four CMOS cameras, relative to two components of the signal in two circular polarization states, in each of the two channels. MOTH II data are used to investigate atmospheric dynamics (e.g., internal gravity waves and magneto-acoustic portals) and Space Weather phenomena. Particularly, flare forecasting algorithms, based on the detection of magnetic active regions (ARs) and associated flare probability estimation, are currently under development. The possible matching of MOTH II data with SDO/HMI and SDO/AIA images into a flux rope model, developed in collaboration between Harvard-Smithsonian CfA and MIT Laboratory for Nuclear Science, is being tested.

CARMENES (Calar Alto high-Resolution search for M dwarfs with Exo-earths with Near-infrared and optical Echelle Spectrographs) is a new instrument currently undergoing commissioning at the 3.5 m telescope of the Calar Alto Observatory. It has been constructed by a consortium of eleven Spanish and German institutions. The scientific goal of the project is a 600-night radial-velocity survey targeting 300 M dwarfs with sufficient precision to detect terrestrial planets in their habitable zones. The CARMENES instrument consists of two separate échelle spectrographs covering the wavelength range from 0.55 to 1.7 μm at a spectral resolution of R = 82,000, fed by fibers from the Cassegrain focus of the telescope. Both spectrographs are housed in a temperature-stabilized environment in vacuum tanks, to enable a long-term radial velocity precision of 1 m s−1. The wavelength calibration will be done with Th-Ne and U-Ne emission line lamps, and with Fabry-Pérot etalons.

For optical fiber spectrum of LAMOST, the requirement for magnitude difference between neighbor fibers is less than 5 magnitudes to avoid faint sources being contaminated by their bright neighbors. However, sometime, neither bright nor faint sources are dense enough to fill a whole plate (4000 fibers). To make full use of all the fibers, they have better be put into the same plate. To resolve crosstalk, we propose that photons fed into a fiber can be degraded by offsetting the fiber from disc center of the bright star. Thus the bright and faint sources can be observed in the same plate without crosstalk contamination. We test the feasibility of the program with the test observation of LAMOST, and the results show that our program is consistent with the expectation.

A heuristic greedy algorithm is developed for efficiently tiling spatially dense redshift surveys. In its first application to the Galaxy and MassAssembly (GAMA) redshift survey we find it rapidly improves the spatial uniformity of our data, and naturally corrects for any spatial bias introduced by the 2dF multi-object spectrograph. We make conservative predictions for the final state of the GAMA redshift survey after our final allocation of time, and can be confident that even if worse than typical weather affects our observations, all of our main survey requirements will be met.

Weihai Echelle Spectrograph (WES) is the first the fiber-fed echelle spectrograph in China. WES can provide data for the studies of metal abundance of stars, exoplanets researches and asteroseismology, etc. A brief description of its design and performance is given.

Current and planned telescope systems (both on the ground and in space) as well as new technologies will be discussed with emphasis on their impact on the studies of binary star and exoplanet systems. Although no telescopes or space missions are primarily designed to study binary stars (what a pity!), several are available (or will be shortly) to study exoplanet systems. Nonetheless those telescopes and instruments can also be powerful tools for studying binary and variable stars. For example, early microlensing missions (mid-1990s) such as EROS, MACHO and OGLE were initially designed for probing dark matter in the halos of galaxies but, serendipitously, these programs turned out to be a bonanza for the studies of eclipsing binaries and variable stars in the Magellanic Clouds and in the Galactic Bulge. A more recent example of this kind of serendipity is the Kepler Mission. Although Kepler was designed to discover exoplanet transits (and so far has been very successful, returning many planetary candidates), Kepler is turning out to be a “stealth” stellar astrophysics mission returning fundamentally important and new information on eclipsing binaries, variable stars and, in particular, providing a treasure trove of data of all types of pulsating stars suitable for detailed Asteroseismology studies. With this in mind, current and planned telescopes and networks, new instruments and techniques (including interferometers) are discussed that can play important roles in our understanding of both binary star and exoplanet systems. Recent advances in detectors (e.g. laser frequency comb spectrographs), telescope networks (both small and large – e.g. Super-WASP, HAT-net, RoboNet, Las Combres Observatory Global Telescope (LCOGT) Network), wide field (panoramic) telescope systems (e.g. Large Synoptic Survey Telescope (LSST) and Pan-Starrs), huge telescopes (e.g. the Thirty Meter Telescope (TMT), the Overwhelming Large Telescope (OWL) and the Extremely Large Telescope (ELT)), and space missions, such as the James Webb Space Telescope (JWST), the possible NASA Explorer Transiting Exoplanet Survey Satellite (TESS – recently approved for further study) and Gaia (due for launch during 2013) will all be discussed. Also highlighted are advances in interferometers (both on the ground and from space) and imaging now possible at sub-millimeter wavelengths from the Extremely Long Array (ELVA) and Atacama Large Millimeter Array (ALMA). High precision Doppler spectroscopy, for example with HARPS, HIRES and more recently the Carnegie Planet Finder Spectrograph, are currently returning RVs typically better than ~2-m/s for some brighter exoplanet systems. But soon it should be possible to measure Doppler shifts as small as ~10-cm/s – sufficiently sensitive for detecting Earth-size planets. Also briefly discussed is the impact these instruments will have on the study of eclipsing binaries, along with future possibilities of utilizing methods from the emerging field of Astroinformatics, including: the Virtual Observatory (VO) and the possibilities of analyzing these huge datasets using Neural Network (NN) and Artificial Intelligence (AI) technologies.

A highlight science case for the European ELT is: First light - The First Galaxies and the Ionization State of the Early Universe. It aims at understanding the formation and evolution of the first sources of light at the end of the Dark Ages and of the re-ionization of the Universe. The corresponding instrument requirements are: a few tens of integral field units with spatial sampling $\sim$20mas and individual fields of ${\sim}1''$ over a wide field of view of $5' \times 5'$ or larger. Multi-Object Adaptive Optics is required to locally provide significant image quality enhancement. Spectroscopic observations are required in the near IR domain with a spectral resolution of a few 1000. MOMFIS is a preliminary instrument concept designed for OWL around this science case. The instrument concept and preliminary design are presented. Development efforts are estimated, as well as development risks and required R&D activities.

I summarise the ELT requirements derived from the science cases in the area of galaxy formation/evolution and cosmology. This summary is based on the talks, posters and discussion in parallel Session A of this meeting, but also makes use of various publically-available ELT science case documents. Topics covered include studies of black holes, dark matter, properties of galaxies at a range of redshifts (including the first galaxies to form), fundamental constants and cosmology.