This work introduces a novel compact ultra-wideband (UWB) antenna designed for wearable applications, employing a bioinspired structure and machine learning (ML) techniques to achieve exceptional performance in the 3.10–10.42 GHz range. The antenna is fabricated by positioning conductive fabric on a polydimethylsiloxane polymer of 1 mm thickness to augment high flexibility and durability. Additionally, it pioneers integrating a complete ground plane to mitigate back radiation toward the human body, presenting a compact (35.5 × 30.5 × 1 mm3) UWB antenna design compliant with IEEE 802.15.6 standards. The design methodology includes using bandwidth enhancement techniques such as chamfering edges, slots, and adding stubs in the feed, along with applying ML to optimize the antenna’s dimensions for desired return loss characteristics. The proposed antenna demonstrates exceptional resilience to human body loading and physical deformation. The simulation and measurement results have good agreement. The K-nearest neighbour method beat the other ML algorithms maximum accuracy of 99.62% to predict the S11. According to the author’s best knowledge, this is the first compact UWB antenna with full ground specified by IEEE.802.15.6 with ML reported.

A bandwidth expansion strategy for ultra-wideband power amplifiers (PAs) is presented in this letter by adopting a parallel impedance matching architecture. This design strategy can effectively reduce the impedance conversion ratio between the load and the target impedance of the PA, thereby providing a feasible solution for broadband impedance matching. Subsequently, a commercially available 10 W gallium nitride device and a two-stage Wilkinson power divider network are combined to achieve the verification of the proposed theory. The results of the measurement show that within the target frequency band of 0.9–3.9 GHz, 58.5–71.2% of the drain efficiency and 9.1–12 dB of gain can be achieved with a saturated output power of 39.1–42 dBm.

Frequency-modulated continuous-wave radar systems profit from increasing the absolute bandwidths of the generated frequency chirps to improve range resolution. As the relative bandwidth of SiGe-voltage-controlled oscillators (VCOs) is limited to about 80%, increasing the center frequency fundamentally or via frequency multiplication is the most direct way to increase that absolute bandwidth. However, as some applications require penetration depth, which dramatically decreases with frequency, other solutions are necessary. Therefore, state-of-the-art concepts rely on the down-conversion of generated frequency chirps via two separately stabilized frequency sources. This article implements a novel architecture, offering relative bandwidths of >100% within a single phase-locked loop (PLL). Therefore, two VCOs at different center frequencies are fed into a down-conversion mixer, whose output is directly stabilized via that PLL with one loop filter generating both tuning voltages. Those circuit blocks can be summarized as one equivalent VCO, offering a higher relative bandwidth and a significantly more linear tuning curve. Thereby, a solution to limited relative bandwidths with high VCO gain variation of single VCO synthesizers is offered while substantially reducing the hardware and implementation effort compared to the state-of-the-art.

This manuscript presents a 50 Ω microstrip-fed quad-element high isolated ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna with band-notched characteristics. The overall area of the proposed structure is 0.33λo × 0.33λo mm2 (where λo depicts the free space wavelength corresponding to the lower cutoff frequency, i.e. 2.54 GHz), etched on an FR-4 substrate of thickness 0.8 mm. The top layer has four semicircular disc-shaped radiating elements that are identical and orthogonal to obtain better inter-element isolation and compactness. A reverse two-shaped slot is etched onto the radiating patches to attain a band-rejection capability. Moreover, a decoupling structure is also placed at the top layer to suppress the unwanted surface waves. The bottom layer consists of a ground plane, which is further modified with quasi-self complementary and meandered line slots. A rectangular slot is also etched below the feed line to better match the impedance near the lower cutoff frequencies. The simulated reflection coefficients (S11) of the proposed antenna are less than −10 dB over 2.54 to 10.74 GHz frequencies except at 3.37 to 4.15 GHz (WiMAX/C band), and the simulated inter-port isolation (S21) is greater than −15 dB over the entire UWB range of frequencies (3.1 to 10.6 GHz). Also, the measured S-parameter results well agreed with the simulated ones. Furthermore, the simulation study of the 20-element UWB-MIMO antenna is also investigated using the proposed quad-element structure.

This paper proposes a passive filtering antenna for ultra-wideband (UWB) applications. The edge chamfering technique is adopted to construct the UWB antenna. The designed UWB antenna has a fractional bandwidth of 135%. A low-pass filter (LPF) is embedded on the feed line of the UWB antenna to convert it into a narrowband antenna that works at 2.45 GHz with 29.5% fractional bandwidth by removing the high-frequency components. The LPF is a transmission line with a stepped impedance configuration loaded with an H-shaped unit cell. The proposed filtering antenna is fabricated and tested. The measured results indicate the gain is >4.2 dBi and the radiation efficiency is >75%.

A miniaturized and flexible frequency-selective surface (FSS) has been presented in this article with a unit cell size of 0.049 λc × 0.049 λc where λc is the free space wavelength at the lower cut-off frequency. In order to achieve an ultra-wide (−3 dB) second order pass band of 151.3% with enhanced selectivity factor of 0.887, a cascaded triple layered hybrid resonating structure has been proposed with symmetrical Minkowski island-shaped fractal geometry pair and spiral-shaped middle layer in optimized air gap coupling. Furthermore, 149.8% ultra-wide pass band also ascertains the conformal feature of the proposed structure. In addition to this, the proposed FSS provides the stable angular response for both TE and TM polarization. An equivalent circuit model has been synthesized for accurate frequency response. Finally, a sample prototype has been fabricated to verify the experimental validation. Excellent angular stability under large oblique incident and significant conformal characteristics ensure the compatibility of the proposed structure for electromagnetic stealth in 0.9–1.8 GHz GSM band, 2.10–2.14 GHz wireless medical telemetry band, 2.4–2.5 and 4.9–5.8 GHz WLAN band, 3.4–3.7 and 4.4–4.9 GHz sub-6 GHz 5 G band, and 3.7–4.2 GHz C band.

A compact ultra-wideband (UWB) square and circular slot ground plane planar antenna with a modified circular patch for UWB communication is presented. This antenna has a low reflection coefficient and high gain in the range of 8.94 GHz, starting from 2.85 to 11.79 GHz. The proposed antenna demonstrates UWB behavior with electrically small dimensions of 0.18 λ0×0.14 λ0×0.015 λ0 (λ0 is the free-space wavelength at 2.85 GHz). The fractional bandwidth of the antenna is 122.1%, with stable radiations. The antenna's maximum gain stands at 2.79 dBi, and the antenna's peak efficiency stands at 72%, respectively. It is lightweight, compact, and easy to manufacture. Hence, it can be used for the complete range of UWB applications and covers Wi-Max/WLAN/ X-Band and Ku-Band.

To solve the problems of low gain, narrow bandwidth, and poor radiation directivity of conventional ground penetrating radar antenna, this paper proposes an ultra-wideband and high-gain antipodal tapered slot antenna (ATSA) with planar metamaterial lens. As a constituent part of this lens, a new non-resonant metamaterial unit cell is introduced and analyzed by the full-wave simulation tool. The single-layer planar lens composed of the designed unit cells with different sizes is placed in the maximum radiation direction of the ATSA to greatly enhance its radiation capability. The proposed planar lens antenna has a wide impedance bandwidth of 107.4% (2.41–8 GHz) and −3 dB gain bandwidth of 54.5% (4–7 GHz), respectively. The gain increases averagely by 6.0 dB in the whole operating frequency band, and the peck gain reaches 15.4 dBi at 5.5 GHz. And its excellent performance shows a high application prospect in ground penetrating radar and microwave imaging system.

This study presents a novel configuration of a cuboidal quad-port ultra-wideband multiple-input and multiple-output antenna with WLAN rejection characteristics. The designed antenna consists of four F-shaped elements backed by a partial ground plane. A 50 Ω microstrip line is used to feed the proposed structure. The geometry of the suggested antenna exhibits an overall size of 23 × 23 × 19 mm3, and the antenna produces an operational bandwidth of 7.6 GHz (3.1–10.7 GHz). The notched band characteristic at 5.4 GHz is accomplished by loading a pair of spiral electromagnetic bandgap structures over the ground plane. Besides this, other diversity features such as envelope correlation coefficient, and diversity gain are also evaluated. Furthermore, the proposed antenna system provides an isolation of −15 dB without using any decoupling structure. Therefore, to validate the reported design, a prototype is fabricated and characterized. The overall simulated performance is observed in very close agreement with it's measured counterpart.

The concept of a “digital twin” as a model for data-driven management and control of physical systems has emerged over the past decade in the domains of manufacturing, production, and operations. In the context of buildings and civil infrastructure, the notion of a digital twin remains ill-defined, with little or no consensus among researchers and practitioners of the ways in which digital twin processes and data-centric technologies can support design and construction. This paper builds on existing concepts of Building Information Modeling (BIM), lean project production systems, automated data acquisition from construction sites and supply chains, and artificial intelligence to formulate a mode of construction that applies digital twin information systems to achieve closed loop control systems. It contributes a set of four core information and control concepts for digital twin construction (DTC), which define the dimensions of the conceptual space for the information used in DTC workflows. Working from the core concepts, we propose a DTC information system workflow—including information stores, information processing functions, and monitoring technologies—according to three concentric control workflow cycles. DTC should be viewed as a comprehensive mode of construction that prioritizes closing the control loops rather than an extension of BIM tools integrated with sensing and monitoring technologies.

In this paper, a super-compact ultra-wideband (UWB) metamaterial absorber (MMA) is presented. The absorber design consists of an inverted L-shaped structure and a diagonal rectangular-shaped structure. The capacitive coupling between these two structures not only provides UWB nature but also provides a super-compact absorber design. The dimension of the unit cell arrangement is 5 × 5 mm2 and printed on a low-cost FR-4 substrate of thickness 1.54 mm (0.061λlowest). The design absorber provides more than 97% absorptivity from 12 to 21 GHz for normal incidence electromagnetic (EM) wave. However, the proposed MMA has a full width at half maximum absorption bandwidth of 11.71 GHz from 10.34 to 22.05 GHz. Moreover, the surface current distributions have been analyzed to understand the absorption mechanism of the MMA. The stability of the proposed design is validated with different incident angles (for TE and TM modes) and different polarization angles. Finally, the absorber design is fabricated and verified experimentally. Furthermore, the UWB frequency range, high absorption, ease in design and fabrication, and cost-effective make it suitable for different quality applications in stealth technology, thermal imaging, radar detection, antenna systems, and other EM devices.

A compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the reconfigurable band-notch performance, two PIN diodes are inserted in the slots, and then the notch-band can be switched by changing the states of the PIN diodes. The antenna has a compact size of 0.47 λ1 × 0.27 λ1. The simulated and measured results indicate that the antenna can operate at a UWB mode, two single band-notch modes, and a dual band-notch mode. Moreover, stable radiation patterns are obtained.

A compact planar ultra-wideband (UWB) antenna with WiMAX and WLAN notched band is presented in this paper. The presented antenna consists of a rectangular patch and slotted partial ground plane and fed by a microstrip feed line. The volumetric size of the antenna is 30 mm × 22 mm × 1.6 mm. Method of moment-based simulation technology is used to simulate and analyze the characteristics of the antenna. To generate two notch bands at WiMAX and WLAN, a pair of parasitic resonator is placed beneath the radiating patch. The presented antenna achieves an operating band (VSWR ≤2) ranging from 2.98 to 12 GHz with an average gain of 3.95 dBi along with considerable efficiency and symmetric radiation patterns. Moreover, the antenna exhibits two notch bands at 3.5 and 5.45 GHz and is able to avoid possible interference with pre-existing narrow band services. The proposed antenna is low cost and low profile and is modeled to be used as a transceiver in UWB communication applications.

The ultra-wideband bandpass-response power divider with high-frequency selectivity is presented in this paper. This power divider consists of an impedance transformer, a filter network, and two isolation resistors. In order to realize the ultra-wideband filtering performance, parallel coupling lines and parallel open-circuit branches are applied to the second impedance converter. A resistor is added to the ends of the coupling lines to achieve good isolation and output return loss. The equivalent-circuit method is employed to analyze the presented power divider. The power divider, working at 3.45–8.29 GHz, is designed and fabricated. Two transmission zeros are generated at 2.8 and 9 GHz, respectively, and the out-of-band suppression is >13 dB. The measured results are in good agreement with the simulation ones.

A compact dual-wideband (DWB) bandpass filter utilizing open-shorted coupled lines (OSCL) is proposed in this paper. The introduction of the folded structure not only reduces the overall size but also contribute to the split of the transmission zero (TZ), which improves the selectivity effectively. Six transmission poles and five TZs are realized utilizing the shorted-circuit stub and OSCL. The characteristic of the flexible adjustment method of TZs guarantees an independently wide adjustable range of the bandwidth. For demonstration, a DWB filter (3 dB bandwidth 120 and 28%, respectively) is designed and fabricated. The filter is compact and has the characteristics of extraordinary wide bandwidth, low insertion loss, as well as high selectivity.

A compact CPW-fed printed monopole slot antenna is presented for ultra-wideband (UWB) applications. The antenna comprises of a dome-shaped radiating element in which embedded is an open-loop inverted triangular-shaped slot (TSS). The antenna is fed through a coplanar waveguide to provide an ultra-wide impedance bandwidth of 8.95 GHz (2.58–11.53 GHz) which corresponds to a bandwidth ratio of 1:4.46 for VSWR <2. The antenna possesses a notch band functionality to filter out interfering C-band signals like wireless local-area network (WLAN). The notch band frequency is determined by physical parameters defining the TSS that allows fine control of the notch's location. The proposed antenna also possesses a flat gain response expect at the notched band and occupies a relatively small volume of 25 × 25 × 0.8 mm3 for ease of system integration.

In this paper the non-ideal and frequency-dependent behavior of the hardware components of the ultra-wideband (UWB) transmitter RF-front end is analyzed. Both digital and analytical methods to compensate for this frequency-dependent behavior are investigated, in order to optimize the radiated wave, so that its spectrum perfectly matches the given mask. An example of spectral system optimization with analog devices is shown and verified through measurement results.