In the classical gambler’s ruin problem, the gambler plays an adversary with initial capitals z and $a-z$, respectively, where $a>0$ and $0< z < a$ are integers. At each round, the gambler wins or loses a dollar with probabilities p and $1-p$. The game continues until one of the two players is ruined. For even a and $0<z\leq {a}/{2}$, the family of distributions of the duration (total number of rounds) of the game indexed by $p \in [0,{\frac{1}{2}}]$ is shown to have monotone (increasing) likelihood ratio, while for ${a}/{2} \leq z<a$, the family of distributions of the duration indexed by $p \in [{\frac{1}{2}}, 1]$ has monotone (decreasing) likelihood ratio. In particular, for $z={a}/{2}$, in terms of the likelihood ratio order, the distribution of the duration is maximized over $p \in [0,1]$ by $p={\frac{1}{2}}$. The case of odd a is also considered in terms of the usual stochastic order. Furthermore, as a limit, the first exit time of Brownian motion is briefly discussed.

Recently, the relevation transformation has received further attention from researchers, and some interesting results have been developed. It is well known that the active redundancy at component level results in a more reliable coherent system than that at system level. However, the lack of study of this problem with relevation redundancy prevents us from fully understanding such a generalization of the active redundancy. In this note we deal with relevation redundancy to coherent systems of homogeneous components. Typically, for a series system of independent components, we have proved that the lifetime of a system with relevation redundancy at component level is larger than that with relevation redundancy at system level in the sense of the usual stochastic order and the likelihood ratio order, respectively. For a coherent system with dependent components, we have developed a sufficient condition in terms of the domination function to the usual stochastic order between the system lifetime with redundancy at component level and that at system level.

In the literature on active redundancy allocation, the redundancy lifetimes are usually postulated to be independent of the component lifetimes for the sake of technical convenience. However, this unrealistic assumption leads to a risk of inaccurately evaluating system reliability, because it overlooks the statistical dependence of lifetimes due to common stresses. In this study, for k-out-of-n:F systems with component and redundancy lifetimes linked by the Archimedean copula, we show that (i) allocating more homogeneous redundancies to the less reliable components tends to produce a redundant system with stochastically larger lifetime, (ii) the reliability of the redundant system can be uniformly maximized through balancing the allocation of homogeneous redundancies in the context of homogeneous components, and (iii) allocating a more reliable matched redundancy to a less reliable component produces a more reliable system. These novel results on k-out-of-n:F systems in which component and redundancy lifetimes are statistically dependent are more applicable to the complicated engineering systems that arise in real practice. Some numerical examples are also presented to illustrate these findings.

In the usual shock models, the shocks arrive from a single source. Bozbulut and Eryilmaz [(2020). Generalized extreme shock models and their applications. Communications in Statistics – Simulation and Computation 49(1): 110–120] introduced two types of extreme shock models when the shocks arrive from one of $m\geq 1$ possible sources. In Model 1, the shocks arrive from different sources over time. In Model 2, initially, the shocks randomly come from one of $m$ sources, and shocks continue to arrive from the same source. In this paper, we prove that the lifetime of Model 1 is less than Model 2 in the usual stochastic ordering. We further show that if the inter-arrival times of shocks have increasing failure rate distributions, then the usual stochastic ordering can be generalized to the hazard rate ordering. We study the stochastic behavior of the lifetime of Model 2 with respect to the severity of shocks using the notion of majorization. We apply the new stochastic ordering results to show that the age replacement policy under Model 1 is more costly than Model 2.

For two n-dimensional elliptical random vectors X and Y, we establish an identity for $\mathbb{E}[f({\bf Y})]- \mathbb{E}[f({\bf X})]$, where $f\,{:}\, \mathbb{R}^n \rightarrow \mathbb{R}$ satisfies some regularity conditions. Using this identity we provide a unified method to derive sufficient and necessary conditions for classifying multivariate elliptical random vectors according to several main integral stochastic orders. As a consequence we obtain new inequalities by applying the method to multivariate elliptical distributions. The results generalize the corresponding ones for multivariate normal random vectors in the literature.

In this paper, to model cascading failures, a new stochastic failure model is proposed. In a system subject to cascading failures, after each failure of the component, the remaining component suffers from increased load or stress. This results in shortened residual lifetimes of the remaining components. In this paper, to model this effect, the concept of the usual stochastic order is employed along with the accelerated life test model, and a new general class of stochastic failure models is generated.

In this paper, we consider finite mixture models with components having distributions from the location-scale family. We then discuss the usual stochastic order and the reversed hazard rate order of such finite mixture models under some majorization conditions on location, scale and mixing probabilities as model parameters.

We investigate stochastic comparisons of parallel systems (corresponding to the largest-order statistics) with respect to the reversed hazard rate and likelihood ratio orders for the proportional reversed hazard rate (PRHR) model. As applications of the main results, we obtain the equivalent characterizations of stochastic comparisons with respect to the reversed hazard rate and likelihood rate orders for the exponentiated generalized gamma and exponentiated Pareto distributions. Our results recover and strengthen some recent results in the literature.

We discuss a new stochastic ordering for the sequence of independent random variables. It generalizes the stochastic precedence (SP) order that is defined for two random variables to the case n > 2. All conventional stochastic orders are transitive, whereas the SP order is not. Therefore, a new approach to compare the sequence of random variables had to be developed that resulted in the notion of the sequential precedence order. A sufficient condition for this order is derived and some examples are considered.

This paper deals with stochastic comparisons of the largest order statistics arising from two sets of independent and heterogeneous gamma samples. It is shown that the weak supermajorization order between the vectors of scale parameters together with the weak submajorization order between the vectors of shape parameters imply the reversed hazard rate ordering between the corresponding maximum order statistics. We also establish sufficient conditions of the usual stochastic ordering in terms of the p-larger order between the vectors of scale parameters and the weak submajorization order between the vectors of shape parameters. Numerical examples and applications in auction theory and reliability engineering are provided to illustrate these results.

In this paper we prove that a parallel system consisting of Weibull components with different scale parameters ages faster than a parallel system comprising Weibull components with equal scale parameters in the convex transform order when the lifetimes of components of both systems have different shape parameters satisfying some restriction. Moreover, while comparing these two systems, we show that the dispersive and the usual stochastic orders, and the right-spread order and the increasing convex order are equivalent. Further, some of the known results in the literature concerning comparisons of k-out-of-n systems in the exponential model are extended to the Weibull model. We also provide solutions to two open problems mentioned by Balakrishnan and Zhao (2013) and Zhao et al. (2016).

In this paper, we discuss the ordering properties of sample ranges arising from multiple-outlier exponential and proportional hazard rate (PHR) models. The purpose of this paper is twofold. First, sufficient conditions on the parameter vectors are provided for the reversed hazard rate order and the usual stochastic order between the sample ranges arising from multiple-outlier exponential models with common sample size. Next, stochastic comparisons are separately carried out for sample ranges arising from multiple-outlier exponential and PHR models with different sample sizes as well as different hazard rates. Some numerical examples are also presented to illustrate the results established here.

To enhance the performance of a system, a common practice employed by reliability engineers is to use redundant components in the system. In this paper we compare lifetimes of series (parallel) systems arising out of different allocations of one or two standby redundancies. These comparisons are made with respect to the increasing concave (convex) order, the hazard rate order, and the stochastic precedence order. The main results extend some related conclusions in the literature.

Testing in order to produce software of high reliability is an area of major concern in software engineering. In an effort to find efficient methods of testing, the comparison of partition and random sampling testing methods has received considerable attention in the literature. A standard criterion for comparisons between random and partition testing, based on their expected efficacy in program debugging, is the probability of detecting at least one failure causing input in the program's domain. However, the goal in software testing is usually to find as many faults as possible in a reasonable period of time, and therefore stochastic comparisons of the number of faults obtained in partition and random testing may provide more valuable information on which testing procedures to use. We establish various conditions which guarantee that the number of faults discovered in partition testing is stochastically greater than the number discovered in random testing (using a fixed total sample size) for many of the well-established stochastic orders (including the usual stochastic order, the hazard rate order, the likelihood ratio order, and the variability order). The results established also allow us to obtain both upper and lower bounds with these stochastic orders for the sum of n independent Bernoulli random trials (with varying probability of success) in terms of the binomial distribution with parameters n and p.

Ebrahimi (2001) proposes an interesting model for assessing a system's reliability, expressing the failure time of the system in terms of a deterioration process and covariates. He also provides illustrative examples and gives some properties of the model. In this note, we give conditions for negative ageing of the system's lifetime, and we correct one of his statements. Moreover, for the lifetimes of two systems of the same kind, some stochastic comparisons are presented.

In a similar spirit to the probabilistic generalization of Taylor's theorem by Massey and Whitt [13], we give a probabilistic analogue of the mean value theorem. The latter is shown to be useful in various contexts of reliability theory. In particular, we provide various applications to the evaluation of the mean total profits of devices having random lifetimes, to the mean total-time-on-test at an arbitrary order statistic of a random sample of lifetimes, and to the mean maintenance cost for the second room of queueing systems in steady state characterized by two serial waiting rooms.

Consider two systems, labeled system 1 and system 2, each with m components. Suppose component i in system k, k = 1, 2, is subjected to a sequence of shocks occurring randomly in time according to a non-explosive counting process {Γ i(t), t > 0}, i = 1, ···, m. Assume that Γ1, · ··, Γm are independent of Mk = (Mk,1, · ··, Mk,m), the number of shocks each component in system k can sustain without failure. Let Zk,i be the lifetime of component i in system k. We find conditions on processes Γ1, · ··, Tm such that some stochastic orders between M1 and M2 are transformed into some stochastic orders between Z1 and Z2. Most results are obtained under the assumption that Γ1, · ··, Γm are independent Poisson processes, but some generalizations are possible and can be seen from the proofs of theorems.

Let X1, X2,… be a sequence of independent random variables and let N be a positive integer-valued random variable which is independent of the Xi. In this paper we obtain some stochastic comparison results involving min {X1, X2,…, XN) and max{X1, X2,…, XN}.

The purpose of this paper is to study two notions of stochastic comparisons of non-negative random variables via ratios that are determined by their Laplace transforms. Some interpretations of the new orders are given, and various properties of them are derived. The relationships to other stochastic orders are also studied. Finally, some applications in reliability theory are described.