References
Published online by Cambridge University Press: 14 December 2023
Summary
A summary is not available for this content so a preview has been provided. Please use the Get access link above for information on how to access this content.
- Type
- Chapter
- Information
- Field Theory of Multiscale Plasticity , pp. 809 - 832Publisher: Cambridge University PressPrint publication year: 2024
References
Abe, T., Lu, X., Nouno, M., and Nanba, T., (1996), “Numerical Study on Yield Curves of FCC Metals Based on Rate-Dependent Crystal Slips,” JSME Int. J., A39, 237–245.Google Scholar
Abrisokov, A. A., Gorkov, L. P., and Dzyaloshinski, I. E., (1963), Methods of Quantum Field Theory in Statistical Physics, Prentice-Hall.Google Scholar
Abu Al-Rub, R. K. and Voyiadjis, G. Z., (2006), “A Physically Based Gradient Plasticity Theory,” Int. J. Plast., 22, 581–774.CrossRefGoogle Scholar
Ackerman, F., Kubin, L. P., Lepinoux, J., and Mughrabi, H., (1984), “The Dependence of Dislocation Microstructure on Plastic Strain Amplitude in Cyclically Strained Copper Single Crystals,” Acta Metall., 32, 715–725.CrossRefGoogle Scholar
Aifantis, E. C., (1984), “On the Microstructural Origin of Certain Inelastic Models,” Trans. ASME, J. Eng. Mater. Technol., 106, 326–330.CrossRefGoogle Scholar
Aifantis, E. C., (1987), “The Physics of Plastic Deformation,” Int. J. Plast., 3, 211–247.CrossRefGoogle Scholar
Akiyama, M., Kuboki, T., Oikawa, K., Matsui, K., and Terada, K., (2002), “Influence of Carbon Content and Carbide Morphology of Carbon Steels on the Stress–Strain Curve in the Vicinity of Yield Point,” Mater. Sci. Technol., 18, 1272–1278.CrossRefGoogle Scholar
Allen, S. M. and Thomas, E. L., (1999), The Structure of Materials, John Wiley & Sons.Google Scholar
Altan, B. S., (2006), Severe Plastic Deformation: Toward Bulk Productions of Nanostructured Materials, Nova Science Publishers.Google Scholar
Amari, S., (1962), “A Theory of Deformations and Stress of Ferromagnetic Substances by Finsler Geometry,” RAAG Memoirs, 3, 257–278.Google Scholar
Aono, Y., Kuramoto, E., and Kitajima, K., (1981), “Plastic Deformation of High Purity Iron Single Crystals,” Rep. Res. Inst. Mech., Kyshu Univ., 24, 127–193.Google Scholar
Aoyagi, Y. and Hasebe, T., (2007), “New Physical Interpretation of Incompatibility Tensor and Its Application to Dislocation Substructure Evolution,” Key Mater. Eng., 340–341, 217–222.CrossRefGoogle Scholar
Aoyagi, Y., Hasebe, T., Guan, P.-C., and Chen, J.-S., (2008), “Reproducing Kernel Based Evaluation of Incompatibility Tensor in Field Theory of Plasticity,” IMMIJ (Interaction and Multiscale Mechanics: An Int. J.), 1, 423–435.CrossRefGoogle Scholar
Argon, A. S., (1996), “Mechanical Properties of Single-Phase Crystalline Media: Deformation at Low Temperatures,” in Physical Metallurgy (eds. Cahn, R. W. and Haasen, P.), pp. 1877–1955, North-Holland.CrossRefGoogle Scholar
Argon, A. S., (2009), “A New Model of Dynamic Recovery for Stage III of Pure FCC Metals without Cross Slip,” Int. J. Mater. Res. (formerly Z. Metallkd.), 100, 488–493.CrossRefGoogle Scholar
Argon, A. S., (2012), Strengthening Mechanisms in Crystal Plasticity, Oxford University Press.Google Scholar
Argon, A. S., (2013), “Strain Avalanches in Plasticity,” Phil. Mag., 93, 3795–3808.CrossRefGoogle Scholar
Asaro, R. J., (1983b), “Micromechanics of Crystals and Polycrystals,” Adv. Appl. Mech., 23, 1–115.CrossRefGoogle Scholar
Asaro, R. J. and Ludarda, V. A., (2006), Mechanics of Solids and Materials, Cambridge University Press.CrossRefGoogle Scholar
Asaro, R. J., Hirth, J. P., Babnett, D. M., and Lothe, J., (1973), “A Further Synthesis of Sextic and Integral Theories for Dislocations and Line Forces in Anisotropic Media,” Phys. Stat. Sol., 60, 261–271.CrossRefGoogle Scholar
Ashby, B. F., (1970), “The Deformation of Plastically Non-Homogeneous Materials,” Philos. Mag. 21, 399–424.CrossRefGoogle Scholar
Bailey, J. E. and Hirsch, P. B., (1960), “The Dislocation Distribution, Flow Stress, and Stored Energy in Cold-Worked Polycrystalline Silver,” Philos. Mag. 5, 485–497.CrossRefGoogle Scholar
Bak, P., Tang, C., and Wiesenfeld, K., (1988), “Self-organized Criticality,” Phys. Rev. A, 38, 364–374.CrossRefGoogle ScholarPubMed
Balanethiram, V. S. and Daehn, G. S., (1993), “Hyperplasticity: Increased Forming Limits at High Workpiece Velocity,” Scripta Metall. et Mater., 30, 512–520.Google Scholar
Baran, P., (1964), “Introduction to Disturbed Communications Networks,” report RM-3420-PR (RAND Corp. Santa Monica, CA, August 1964), www.rand.org/pubs/research_memoranda/RM3420.html.Google Scholar
Barbe, F., Cecker, L., Jeulin, D., and Caillettaud, G., (2001a), “Intergranular and Intragranular Behavior of Polycrystalline Aggregates. Part 1: F. E. Model,” Int. J. Plast., 17, 513–536.CrossRefGoogle Scholar
Barbe, F., Forest, S., and Caillettaud, G., (2001b), “Intergranular and Intragranular Behavior of Polycrystalline Aggregates. Part 2: Results,” Int. J. Plast., 17, 537–563.CrossRefGoogle Scholar
Bardet, J. P., (1994), “Numerical Simulations of the Incremental Responses of Idealized Granular Materials,” Int. J. Plast., 10, 879–908.CrossRefGoogle Scholar
Barrett, C. R., Nix, W. D., and Tetelman, A. S., (1973), The Principles of Engineering Materials, Prentice-Hall.Google Scholar
Bassani, J. L. and Wu, T. Y., (1991), “Latent Hardening in Single Crystals-II. Analytical Characterization and Predictions,” Proc. R. Soc. London, A., 435, 21–41.Google Scholar
Bassani, J. L., Ito, K., and Vitek, V., (2001), “Complex Macroscopic Plastic Flow Arising from Non-Planar Dislocation Core Structures,” Mater. Sci. Eng. A, 319, 97–101.CrossRefGoogle Scholar
Bay, B., Hansen, N., and Kuhlmann-Wilsdorf, D., (1989), “Deformation Structures in Lightly Rolled Pure Aluminum,” Mater. Sci. Eng., 113A, 385–397.CrossRefGoogle Scholar
Benssousan, A., Lions, J.-L., and Papanicoulau, G., (1978), Asymptotic Analysis for Periodic Structures, North Holland.Google Scholar
Berner, R. and Kronmuller, H. (1965), “Plastische Verformung von Einkristallen,” in Fehlstellen, Plastizität, Strahlenschädigung und Elektronentheorie (ed. Seeger, A.), pp. 35–125, Springer.CrossRefGoogle Scholar
Bhadeshia, H. K. D. H., (1997), “Models for the Elementary Mechanical Properties of Steel Welds,” in Mathematical Modeling of Weld Phenomena (ed. Cerjak, H.), pp. 229–284, Routledge.Google Scholar
Bilby, B. A., Bullough, R., and Smith, E., (1955), “Continuum Distributions of Dislocations: A New Application of the Methods of Non-Riemannian Geometry,” Proc. R. Soc. London, A, 231, 263–273.Google Scholar
Bilby, B. A., Cottrell, A. H., and Swinden, R. H., (1963), “The Spread of Plastic Yield from a Notch,” Proc. Roy. Soc. London, A, 272, 304–311.Google Scholar
Blazynski, T. Z., (ed.), (1987), Materials at High Strain Rates, Elsevier Applied Science.Google Scholar
Buchanan, M., (2002), NEXUS –Small Worlds and the Groundbreaking Theory of Networks, W. W. Norton & Company.Google Scholar
Budiansky, B. and Wu, T. T., (1962), “Theoretical Prediction of Plastic Strains of Polycrystals,” Proc. 4th Congr. Appl. Mech., 2, 1175–1185.Google Scholar
Bulatov, V. V. and Cai, W., (2006), Computer Simulations of Dislocations, Oxford University Press.CrossRefGoogle Scholar
Bulatov, V. V., Hsiung, L. L., Tang, M., Arsenlis, A., Bartelt, M. C., Cai, W., Florando, J. N., Hiratani, M., Rhee, M., Pierce, T. G., and de la Rubia, T. D., (2006), “Dislocation Multi-junctions and Strain Hardening,” Nature, 440, 1174–1178.CrossRefGoogle ScholarPubMed
Burch, H. and Cheswick, B., (1998), “Internet Mapping Project,” www.visualcomplexity.com/vc/project_details.cfm?id=117&index=18&domain=InternetGoogle Scholar
Campbell, J. D. and Ferguson, W. C., (1970), “Temperature and Strain-Rate Dependence of Shear-Strength of Mild Steel,” Phil. Mag., 21, 63–82.CrossRefGoogle Scholar
Capriz, G., (1989), Continua with Microstructure, Springer Tracts in Natural Philosophy, 35, Springer-Verlag.CrossRefGoogle Scholar
Chaikin, P. M. and Lubensky, T. C., (1995), Principles of Condensed Matter Physics, Cambridge University Press.CrossRefGoogle Scholar
Chaikin, P. M. and Lubensky, T. C., (2000), Principles of Condensed Matter Physics, 2nd ed., Cambridge University Press.Google Scholar
Chapuis, A. and Driver, J. H., (2011), “Temperature Dependency of Slip and Twinning in Plane Strain Compressed Magnesium Single Crystals,” Acta Mater., 59, 1986–1994.CrossRefGoogle Scholar
Chen, J. S., Pan, C., Wu, C. T., and Liu, W. K. (1996), “Reproducing Kernel Particle Methods for Large Deformation Analysis of Nonlinear Structures”, Comput. Methods Appl. Mech. Eng., 139, 195–227.CrossRefGoogle Scholar
Chen, Z. Z., Kioussis, N., Ghoniem, N., and Hasebe, T., (2008), “Lubricant Effect of Copper Nanoclusters on the Dislocation core in α-Fe,” Phys. Rev. B, 77, 1–5.Google Scholar
Chun, B. K., Jinna, J. T., and Lee, J. K., (2002), “Modeling the Bauschinger Effect for Sheet Metals, Part I: Theory,” Int. J. Plast., 18, 571–595.CrossRefGoogle Scholar
Cleveland, R. M. and Ghosh, A. K., (2002), “Inelastic Effects on Springback in Metals,” Int. J. Plast., 18, 769–785.CrossRefGoogle Scholar
Cuitinõ, A. M., Stainer, L., Wang, G., Strachan, A., Cağin, T., Goddard III, W. A., and Ortiz, M., (2001), “A Multiscale Approach for Modeling Crystalline Solids,” J. Computer-Aided Maters. Design, 8, 127–149.CrossRefGoogle Scholar
Daehn, G. S., Altynova, M., Balanethiram, V. S., Fenton, G., Padmanabhan, M., Tamhane, A., and Winnard, E., (1995), “High-Velocity Metal Forming: An Old Technology Addresses New Problems,” JOM (USA), 47, 42–45.Google Scholar
Daehn, G. S., Vohnout, J., and Datta, S., (2000), “Hyperplastic Forming: Process Potential and Factors Affecting Formability,” in Superplasticity and Superplastic Forming (eds. Berbon, P. B. Berbon, M. Z., Sakuma, T., and Langdon, T. G.), pp. 247–253, Cambridge University Press.Google Scholar
Dash, W. G., (1957), “The Observation of Dislocations in Silicon,” in Dislocations and Mechanical Properties of Crystals (eds. Fisher, J. C., Johnston, W. G., Thomson, R., and Vreeland, Jr., T.), pp. 57–68, Wiley.Google Scholar
de Wit, R., (1960), “The Continuum Theory of Stationary Dislocations,” Solid State Phys., 10, 249–292.CrossRefGoogle Scholar
Devincre, B. and Kubin, L. P., (1997), “Mesoscopic Simulations of Dislocations and Plastictiy,” Mater. Sci. Eng. A, 234–236, 8–14.CrossRefGoogle Scholar
Devincre, B. and Kubin, L. P., (1999), “From Dislocation Mechanisms to Dislocation Microstructures and Strain Hardening,” in Analysis and Relation to Properties (Proc. 20th Risø Int. Symp. Maters. Sci.), (eds. Bilde-Sorensen, J.B., Carstensen, J.V., Hansen, N., Juul Jensen, D., Leffers, T., Panteleon, W., Pedersen, O.B., and Winther, G.), pp. 61–83, Risø National Laboratory.Google Scholar
Dillamore, I. L., Morris, P. L., Smith, C. J. E., and Hutchinson, W. B., (1972), “Transition Bands and Recrystallization in Metals,” Proc. Roy. Soc. London, A, 329, 405–420.Google Scholar
Doyama, M. and Yamamoto, R., (eds.), (1988), Zairyo no Soshiki to Kinou (Structures and Functions of Materials), University of Tokyo Press (in Japanese).Google Scholar
Duesbery, M. S. and Vitek, V., (1998), “Plastic Anisotropy in B.C.C. Transition Metals (Overview No.128),” Acta Mater., 46, 1481–1492.CrossRefGoogle Scholar
Dutta, P. and Horn, P. M., (1981), “Low-Frequency Fluctuations in Solids: 1/f Noise,” Rev. Mod. Phys., 53, 497–516.CrossRefGoogle Scholar
Edagawa, K., Suzuki, T., and Takeuchi, S., (1997), “Motion of a Screw Dislocation in a Two-dimensional Peierls Potential,” Phys. Rev. B, 55, 6180–6187.CrossRefGoogle Scholar
Eifler, D. and Macherauch, E., (1990), “Microstructure and Cyclic Deformation Behaviour of Plain Carbon and Low-Alloyed Steels,” Int. J. Fatigue, 12, 165–174.CrossRefGoogle Scholar
El-Azab, A., (2000), “Statistical Mechanics Treatment of the Evolution of Dislocation Distributions in Single Crystals,” Phys. Rev. B, 61, 11956–11966.CrossRefGoogle Scholar
Eleiche, A. M. and Campbell, J. D., (1976), The Influence of Strain-Rate History and Temperature on the Shear Strength of Copper. Titanium and Mild Steel, Air Force Materials Laboratory, Wright-Patterson Air Force Base, Tech Report AFML-TR-76-90).Google Scholar
Embury, J. D., (1971), “The Role of Substructure,” in Strengthing Methods in Crystals (eds. Kelly, A. and Nicholson, R. B.), pp. 331–342, Elsevier.Google Scholar
Endo, T., (2001), “Measurements of Activation Parameters through the Analysis of Mechanical Differential Tests and Strain Rate Dependence of Flow Stress,” in The Final Report of Research Group on High-Speed Deformation of Steels for Automotive Use, 3.4.3, pp. 131–146, ISIJ.Google Scholar
Epstein, M., and Elzanowski, M., (2007), Material Inhomogeneities and their Evolution, Springer.Google Scholar
Eringen, A. C., (1966), “Linear Theory of Micropolar Elasticity,” J. Mat. Mech., 16, 909–923.Google Scholar
Eringen, A. C., (ed.), (1981), “Special Issue Dedicated to Prof. K. Kondo on the Occasion of His Seventieth Birthday,” Int. J. Eng. Sci., 19, 1455–1807.CrossRefGoogle Scholar
Escaig, B., (1968), “Cross Slipping Process in the F.C.C. Structure,” in Dislocation Dynamics (eds. Rosenfield, A. R., Hahn, G. T., Bement Jr., A. L., and Jaffee, R. I.), p. 655, McGraw-Hill.Google Scholar
Eshelby, J. D., (1951) “The Force on an Elastic Singularity,” Phil. Trans. Roy. Soc. London, A, 241, 87–112.Google Scholar
Eshelby, J. D., (1956), “Continuum Theory of Lattice Defects,” in Solid State Physics (eds. Seitz, F. and Turnbull, D.), pp. 79–144, Academic Press.Google Scholar
Eshelby, J. D., (1975), “The Elastic Energy-Momentum Tensor,” J. Elasticity, 5, 321–335.CrossRefGoogle Scholar
Faloutsos, M., Faloutsos, P., and Faloutsos, C., (1999), “On Power-Law Relationships of the Internet Topology,” Comput. Commun. Rev., 29, 251–262.CrossRefGoogle Scholar
Feltner, C. E. and Laird, C., (1967), “Cyclic Stress-Strain Response of F.C.C. Metals and Alloys – II Dislocation Structures and Mechanisms,” Acta Metall., 15, 1633–1653.CrossRefGoogle Scholar
Fish, J., (2007), “Discrete-to-Continuum Scale Bridging,” in Multiscaling in Molecular and Continuum Mechanics: Interaction of Time and Size from Macro to Nano (ed. Sih, C. C.), pp. 85–102, Springer.Google Scholar
Fisher, D. J. (ed.), (2000), “Dislocation Theory – A Five Year Perspective,” Defect Diffu. Forum, 179–180, Scitec PublicationsGoogle Scholar
Fleck, N. A. and Hutchinson, J. W., (1997), “Strain Gradient Plasticity”, Adv. Appl. Mech., 33, 295–361.CrossRefGoogle Scholar
Follansbee, P. S., (1985), “High Strain Rate Deformation in FCC Metals and Alloys,” Los Alamos National Lab.(LANL), LA-UR-85-3026; CONF-850770-8.Google Scholar
Follansbee, P. S., (1986), “High-Strain-Rate Deformation of FCC Metals and Alloys,” in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena (eds. Murr, L. E., Staudhammer, K. P., and Meyers, M. A.), pp. 451–479, Vol. 52, Mechanical Engineering, (eds. Faulkner, L. L. and Menkes, S.B.), Marcel Dekker.Google Scholar
Follansbee, P. S. and Kocks, U. F., (1988), “A Constitutive Description of the Deformation of Copper Based on the Use of the Mechanical Threshold Stress as an Internal State Variable,” Acta Metall., 36, 81–93.CrossRefGoogle Scholar
Follansbee, P. S., Regazzoni, G., and Kocks, U. F., (1984), “The Transition to Drag-controlled Deformation in Copper at High Strain Rates,” Mechanical Properties at High Rates of Strain, Conf. Series 70, Inst. Phys., 71.Google Scholar
Fourie, J. T., (1968) “The Flow Stress Gradient between the Surface and Centre of Deformed Copper Single Crystals,” Phil. Mag., 17, 735–756.CrossRefGoogle Scholar
Francois, P., Pineau, A., and Zaoui, A., (1993a), “Mechanical Behaviour of Materials, Volume I: Elasticity and Plasticity,” Kluwer Academic Publishers.Google Scholar
Francois, P., Pineau, A., and Zaoui, A., (1993b), “Mechanical Behaviour of Materials, Volume II: Viscoplasticity, Damage, Fracture and Contact Mechanics,” Kluwer Academic Publishers.Google Scholar
Francoisi, P., (1983), “Glide Mechanisms in B.C.C. crystals: An Investigation of the Case of α-iron Through Multislip and Latent Hardening Tests,” Acta Metall., 31, 1331–1342.CrossRefGoogle Scholar
Francoisi, P., (1985), “The Concepts of Latent Hardening and Strain Hardening in Metallic Single Crystals,” Acta Metall., 33, 1601–1612.CrossRefGoogle Scholar
Francoisi, P. and Zaoui, A., (1982), “Multislip in F.C.C. Crystals: A Theoretical Approach Compared with Experimental Data,” Acta Metall., 30, 1627–1637.CrossRefGoogle Scholar
Francoisi, P., Berveiller, M., and Zaoui, A., (1980), “Latent Hardening in Copper and Aluminium Single Crystals,” Acta Metall., 28, 273–283.CrossRefGoogle Scholar
Frank, F. C. and ReadJr., W. C., (1950), “Multiplication Processes for Slow Moving Dislocations,” Phys. Rev., 79, 722–724.CrossRefGoogle Scholar
Frederiksen, S. L. and Jacobsen, K. W., (2003), “Density Functional Theory Studies of Screw Dislocation Core Structures in BCC Metals,” Phil. Mag., 83, 365–375.CrossRefGoogle Scholar
Frisch, U., Sulem, P.-L., and Nelkin, M., (1978), “A Simple Dynamical Model of Intermittent Fully Developed Turbulence,” J. Fluid Mech., 87, 719–736.CrossRefGoogle Scholar
Frost, H. J. and Ashby, M. F., (1975), “Deformation-Mechanism Maps for Steady State Flow,” in Rate Processes in Plastic Deformation of Materials, (eds. Li, J. C. and Mukherjee, A. K.), p. 70, American Society for Metals (ASM).Google Scholar
Fujita, H., (1967), “Continuous Observation of Dynamic Behaviors of Dislocations in Aluminum,” J. Phys. Soc, Japan, 23, 1349–1361.CrossRefGoogle Scholar
Fujita, H. and Miyazaki, S., (1978), “Lüders Deformation in Polycrystalline Iron,” Acta Metal., 26, 1273–1281.CrossRefGoogle Scholar
Fujita, H. and Tabata, T., (1973), “The Effect of Grain Size and Deformation Sub-Structure on Mechanical Properties of Polycrystalline Aluminum,” Acta Metall., 21, 355–365.CrossRefGoogle Scholar
Fujita, H., Toyoda, K., Mori, T., Tabata, T., Ono, T. and Takeda, T., (1983), “Dislocation Behavior in the Vicinity of Grain Boundaries in FCC Metals and Alloys,” Trans. JIM, 24, 195–204.CrossRefGoogle Scholar
Funatsu, T., Harada, Y., Tokunaga, M., Saito, K. and Yanagida, T., (1995), “Imaging of Single Fluorescent Molecules and Individual ATP Turnovers by Single Myosin Molecules in Aqueous Solution,” Nature, 376, 555–559.CrossRefGoogle Scholar
Geeves, M. A., (2002), “Molecular Motors: Stretching the Lever-arm Theory,” Nature, 415, 129–131.CrossRefGoogle ScholarPubMed
Geng, J., Howell, D., Longhi, E., Behringer, R. P., Reydellet, G., Vanel, L., Clément, E., and Luding, S., (2001), “Footprints in Sand: The Response of a Granular Material to Local Perturbations,” Phys. Rev. Lett., 87, 035506.CrossRefGoogle ScholarPubMed
Ghoniem, N. M. and Sun, L. Z., (1999), “Fast-sum Method for the Elastic Field of Three-Dimensional Dislocation Ensembles”, Phys. Rev., B60, 128–140.CrossRefGoogle Scholar
Ghoniem, N. M. and Walgraef, D., (2008), “Instabilities and Self-Organization in Materials: Part I. Fundamentals,” ibid “Part II: Applications,” Oxford University Press.CrossRefGoogle Scholar
Ghoniem, N. M., Tong, S.-H., and Sun, L. Z., (1999), “Parametric Dislocation Dynamics: A Thermodynamics-Based Approach to Investigations of Mesoscopic Plastic Deformation”, Phys. Rev., B61, 913–927.Google Scholar
Gor’kov, L. P., (1959), “Microscopic Derivation of the Ginzburg-Landau Equations in the Theory of Superconductivity,” Sov. Phys. JETP, 9, 1364–1367.Google Scholar
Gracio, J. J., (1995), “The Effect of Grain Size on the Microstructural Evolution of Copper Deformed in Rolling,” Mater. Sci. Eng., A196, 97–104.CrossRefGoogle Scholar
Granovetter, M. S., (1973), “The Strength of Weak Ties,” Am. J. Sociol., 78, 1360–1380CrossRefGoogle Scholar
Gray III, T. G., (1992), “Influence of Shock-Wave Deformation on the Structure/Property Behavior of Materials,” in High Pressure Shock Compression of Solids Solids (Shock Wave and High Pressure Phenomena) (eds. Asay, J. R. and Shahinpoor, M.), p. 409, Springer-Verlag.Google Scholar
Griffith, A. A., (1921), “The Phenomenon of Rupture and Flow in Solids,” Phil. Trans. Roy. Soc. A., 221, 163–198.Google Scholar
Groma, I., (1997), “Link Between the Microscopic and Mesoscopic Length-Scale Description of the Collective Behavior of Dislocations,” Phys. Rev. B, 56, 5807–5813.CrossRefGoogle Scholar
Groma, I. and Bako, B., (2000), “Dislocation Patterning: From Micro- to Mesoscale Description,” Phys. Rev. Lett., 84, 1487–1490.CrossRefGoogle ScholarPubMed
Grosskreutz, J. C., (1963), “Development of Substructure in Polycrystalline Aluminum During Constant‐Strain Fatigue,” J. Appl. Phys., 34, 372–379.CrossRefGoogle Scholar
Grosskreutz, J. C. and Shaw, G. G., (1967), “Microstructures at the Tips of Growing Fatigue Cracks in Aluminum Alloys,” ASTM STP, 415, 226–243, https://doi.org/10.1520/STP47233S.Google Scholar
Grumbacher, S. K., McEwen, K. M., Halverson, D. A., Jacobs, D. T., and Lindner, J., (1992), “Self-organized Criticality: An Experiment with Sandpiles,” Am. J. Phys., 61, 329–335.CrossRefGoogle Scholar
Gumbsch, P. and Gao, H., (1999), “Dislocations Faster than the Speed of Sound,” Science, 283, 965–968.CrossRefGoogle ScholarPubMed
Gurtin, M. E. and Anand, L., (2005), “A Theory of Strain-Gradient Plasticity for Isotropic, Plastically Irrotational Materials. Part II: Finite Deformations,” Int. J. Plasticity, 21, 2297–2318.CrossRefGoogle Scholar
Hahn, E. N., Zhao, S., Bringa, E. M., and Meyers, M. A., (2016), “Supersonic Dislocation Bursts in Silicon,” Scientific Reports, 6-269777, https://doi.org/10.1038/srep26977.Google ScholarPubMed
Hähner, P., (1996), “A Theory of Dislocation Cell Formation Based on Stochastic Dislocation Dynamics,” Acta Mater., 44, 2345–2352.CrossRefGoogle Scholar
Hähner, P., Bay, K., and Zaiser, M., (1998), “Fractal Dislocation Patterning During Plastic Deformation,” Phys. Rev. Lett., 81, 2470–2473.CrossRefGoogle Scholar
Haken, H., (1977), Synergetics: An Introduction. Nonequilibrium Phase Transition and Self-Organization in Physics, Chemistry and Biology, Springer.Google Scholar
Hansen, N., (2001), “New Discoveries in Deformed Metals,” Metall. Maters. Trans. A, 32, 2917–2935.CrossRefGoogle Scholar
Hansen, N., (2004), “Deformation Microstructures with a Structural Scale from the Micrometre to Nanometre Dimension,” in Evolution of Deformation Microstructures in 3D (Proc. 25th Int. Symp. Maters. Sic.) (eds. Gundlach, C., Haldrup, K., Hansen, N., Haung, X., Jensen, D. J., Leffers, T., Li, Z. J., Nielsen, S. F., Pantleon, W., Wert, J. A., and Winther, G.), pp. 13–32, Risø National Lab.Google Scholar
Hansen, N. and Kuhlmann-Wilsdorf, D., (1986), “Low Energy Dislocation Structures Due to Unidirectional Deformation at Low Temperatures,” Mat. Sci. Eng., 81, 141–161.CrossRefGoogle Scholar
Hasebe, T., (2004a), “Continuum Description of Inhomogeneously Deforming Polycrystalline Aggregate Based on Field Theory,” in Meso-Scale Simulation and Modeling of Strength and Fracture of Materials, IUTAM Symp. Mesoscopic Dynamics of Fracture Process and Materials Strength (eds. Kitagawa, H. and Shibutani, Y.), pp. 381–390, Kluwer.Google Scholar
Hasebe, T., (2004b), “Field Theoretical Multiscale Modeling of Polycrystal Plasticity,” Trans. MRS-J, 29, 3619–3624.Google Scholar
Hasebe, T., (2006), “Multiscale Crystal Plasticity Modeling based on Field Theory,” Comput. Mech. Eng. Sci. (CMES), 11, 145–156.Google Scholar
Hasebe, T. (2009a), “Interaction Fields Based on Incompatibility Tensor in Field Theory of Plasticity – Part I: Theory,” IMMIJ, (Interaction and Multiscale Mechanics: An Int. J.), 2, 1–14.CrossRefGoogle Scholar
Hasebe, T. (2009b), “Interaction Fields Based on Incompatibility Tensor in Field Theory of Plasticity – Part II: Application,” IMMIJ, (Interaction and Multiscale Mechanics: An Int. J.), 2, 15–30.CrossRefGoogle Scholar
Hasebe, T. and Imaida, Y., (1996), “Effect of Blank Holder Force on Limiting Drawing Height in Hydro-spark Forming,” Advanced Technol. Plasticity 1996 (Proc. 5th ICTP), Vol. II (ed. Altan, T.), 797–800.Google Scholar
Hasebe, T. and Imaida, Y., (1998), “Construction of Quantum Field Theory of Dislocations Based on Non-Riemannian Plasticity,” Acta Metall. Sinica, 11, 405–411.Google Scholar
Hasebe, T. and Imaida, Y., (1999), “Gauge Theory of Dislocations and the Non-Riemannian Plasticity,” Progress in Mechanical Behavior of Materials (Proc. ICM8), Vol. III (eds. Ellyn, F. and Provan, J. W.), pp. 1077–1082, University of Victoria.Google Scholar
Hasebe, T. and Imaida, Y., (2007), “On Micro Forming by Hydro Spark Forming Method,” Mater. Sci. Forum, 566, 167–172.CrossRefGoogle Scholar
Hasebe, T. and Naito, T., (2014), “FTMP-based 4D Evaluations of Discrete Dislocation Systems,” in Proc. 35th Risø Int. Symp. Maters. Sci.: New Frontiers of Nanometals (eds. Fæster, S., Jensen, D. J., Hansen, N., Ralph, B., and Sun, J.), pp. 306–312, Department of Wind Energy, Roskilde Danish Technical University.Google Scholar
Hasebe, T. and Sugiyama, M., (2014), “FTMP-based Simulation for Self-evolving Dislocation Substructures under Simple Shear for Steel Single Crystals Having BCC Structure,” in Proc. 35th Risø Int. Symp. Maters. Sci.: New Frontiers of Nanometals (eds. Fæster, S., Jensen, D. J., Hansen, N., Ralph, B., and Sun, J.), pp. 313–320, Department of Wind Energy, Roskilde Danish Technical University.Google Scholar
Hasebe, T., Imaida, Y., and Nakamoto, H., (1998), “Effect of Pre-Torsion Strain on Impact Compression Behavior of FCC Metals,” J. Soc. Mat. Sci. Japan, 47, 26–32.CrossRefGoogle Scholar
Hasebe, T., Kumai, S., and Imaida, Y., (1999), “Impact Compression Behavior of FCC Metals With Pre-Torsion Strains”, Mater. Process. Technol., 85, 184–187.CrossRefGoogle Scholar
Hasebe, T., Shibahara, K., and Imaida, Y., (1997), “Modelling of Dislocation Interaction in FCC Metals and Its Application to Nonproportional Cyclic Loading.” J. Soc. Mat. Sci., Japan, 46, 475–480.CrossRefGoogle Scholar
Hasebe, T., Sugiyama, M., Adachi, H., Fukutani, S., and Iida, M., (2014), “Modeling and Simulations of Experimentally-Observed Dislocation Substructures Based on Field Theory of Multiscale Plasticity (FTMP) Combined with TEM and EBSD-Wilkinson Method for FCC and BCC Poly/Single Crystals,” Mate. Trans., 55, 779–787.CrossRefGoogle Scholar
Hasebe, T., Takenaga, Y., Kakimoto, H., and Imaida, Y., (1998), “High Strain Rate Forming Using Underwater Shock Wave Focusing Technique,” J. Maters. Process. Technol., 85, 194–197.CrossRefGoogle Scholar
Hasegawa, T., Yakou, T., and Karashima, S., (1975), “Deformation Behavior and Dislocation Structures upon Stress Reversal in Polycrystalline Aluminium,” Mater. Sci. Eng., 20, 267–276.CrossRefGoogle Scholar
Hatanaka, K., (1974), “Fatigue-Induced Dislocation Structures and Some Considerations of Cyclic Deformation Behavior of Metals,” J. Soc. Maters. Sci., 23, 423–436.CrossRefGoogle Scholar
Hatherly, M. and Hutchinson, W. B., (1979), “An Introduction to Textures in Metals,” (Monograph 5), The Institution of Metallurgists, London.Google Scholar
Hayakawa, N., (2003), “Sanitu Ryushi-kei no Rikigaku (Mechanics of Dissipative Particle Systems),” Iwanami Lectures: The World of Physics and Mathematics, 4, Iwanami, (In Japanese).Google Scholar
Higashida, K. and Morikawa, T., (2008), “Microstructural Characteristics Developed by Inhomogeneous Plastic Flow: Focusing on the Formation of Shear Bands,” Tetsu-to-Hagané, 94, 576–581.CrossRefGoogle Scholar
Hill, R., (1968), “On Constitutive Inequalities for Simple Materials - I,” J. Mech. Phys. Solids, 16, 229–242.CrossRefGoogle Scholar
Hill, R. and Rice, J. R. J., (1972), “Constitutive Analysis of Elastic-Plastic Crystals at Arbitrary Strain,” J. Mech. Phys. Solids, 20, 401–413.CrossRefGoogle Scholar
Hirsch, J. and Lucke, J. K., (1988a), “Description and Presentation Methods for Textures,” Texture. Microstruct., 8 & 9, 131–151.CrossRefGoogle Scholar
Hirsch, J. and Lucke, J. K., (1988b), “Mechanism of Deformation and Development of Rolling Textures in Polycrystalline F.C.C. Metals -I. Description of Rolling Texture Development in Homogeneous CuZn Alloys,” Acta Metall., 36, 2863–2882.CrossRefGoogle Scholar
Hirsch, P. B., (1960), Proc. 5th Int. Conf. Crystallography, Cambridge University Press.Google Scholar
Holt, D., (1970), “Dislocation Cell Formation in Metals,” J. Appl. Phys., 41, 3197–3201.CrossRefGoogle Scholar
Homma, H., (1989), “Crack Propagation Analyses Based on Continuously Distributed Dislocation Models,” in Computational Mechanics [I] (ed. Yagawa, G.), pp. 146–162, Yokendo (in Japanese).Google Scholar
Homma, H., Kurihara, K., and Nakazawa, H., (1984), “Numerical Analysis of Fatigue Striations,” J. Mech. Solids, 32, 213–226.CrossRefGoogle Scholar
Hong, C., Huang, X., and Winther, G., (2013), “Dislocation Content of Geometrically Necessary Boundaries Aligned with Slip Planes in Rolled Aluminium,” Phil. Mag. A, 93, 3118–3141.CrossRefGoogle Scholar
Hu, H. and Goodman, S. R., (1963), “Texture Transition in Copper,” Trans. Metall. Soc. AIME, 227, 627–639.Google Scholar
Hu, H., Sperry, P. R., and Beck, P. A., (1952), “Rolling Textures in Face-Centered Cubic Metals,” J. Metals (Trans AIME), 194, 76–81.Google Scholar
Huang, S. and Clifton, R. J., (1985), “Dynamic Plastic Response of OFHC Copper at High Shear Strain Rates,” in Macro and Micro-mechanics of High Velocity Deformation and Fracture, IUTAM Symposium on MMMHVDF, Tokyo, Japan (eds. Kawata, K. and Shioiri, J.), pp. 63–74, Springer.Google Scholar
Huang, X. and Winther, G., (2007), “Dislocation Structures. Part I. Grain Orientation Dependence,” Phil. Mag., 87, 5189–5214.CrossRefGoogle Scholar
Hughes, D., (2001), Scaling of Deformation-Induced Microstructures in FCC Metals, Scripta Mat.,. Hughes, F. A., and Chapman & Hall (translation of original 1935 German edn.).Google Scholar
Hughes, D. A. and Hansen, N., (2000), “Microstructure and Strength of Nickel as Large Strains,” Acta Mater., 48, 2985–3004. (See “Glossary” on p. 20 for detailed classification of dislocation structures.)CrossRefGoogle Scholar
Humphreys, F. J. and Hatherly, M., (2004), “Recrystallization and Related Annealing Phenomena,” Elsevier. (First ed. 1995.)Google Scholar
Hutchinson, J. W., (1976), “Bounds and Self-consistent Estimates for Creep of Polycrystalline Materials,” Proc. R. Soc. London, A., 348, 101–127.Google Scholar
Hutchinson, W. B., (1994), “Practical Aspects of Texture Control in Low Carbon Steels,” Mater. Sci. Forum, 157, 1917–1928.CrossRefGoogle Scholar
Ihara, S. and Hasebe, T., (2019), “FTMP-based Simulations and Evaluations of Geometrically Necessary Boundaries (GNBs) of Dislocation,” Int. J Multiphys., 13, 253–268.Google Scholar
Ihara, S., Uematsu, M., and Hasebe, T., (2020), “FTMP-based Simulation and Evaluation of Apparent Reduction in Elastic Modulus,” Int. J. Multiphys., 14, 373–388.Google Scholar
Iron and Steel Inst. Japan, The (ISIJ), (2001), The Final Report of Research Group on High-Speed Deformation of Steels for Automotive Use, ISIJ.Google Scholar
Ito, K. and Vitek, V., (2001), “Atomistic Study of Non-Schmid Effects in the Plastic Yielding of BCC Metals,” Philos. Mag., 81, 1387–1407.CrossRefGoogle Scholar
Itoh, T., (1992), “Study of Cyclic Constitutive Relation under Proportional and Nonproportional Multi-axial Loading and High Temperature Low Cycle Fatigue Life Evaluation,” PhD Thesis, Ritsumeikan University, Japan.Google Scholar
Itoh, T., Sakane, M., Ohnami, M., and Ameyama, K., (1992), “Effect of Stacking Fault Energy on Cyclic Constitutive Relation Under Nonproportional Loading,” J. Soc. Mat. Sci. Japan, 41, 1361–1367.CrossRefGoogle Scholar
Ivanchenko, Y. M. and Lisyansky, A. A., (1995), Physics of Critical Fluctuations, Springer.CrossRefGoogle Scholar
Ivanova, V. S. and Terentyev, V. F. (eds.), (1975), Nature of Metal Fatigue, Metallurgy Moscow.Google Scholar
Iwashita, K. and Oda, M., (1999), Mechanics of Granular Materials: An Introduction, CRC Press.Google Scholar
Jackobsen, B., Poulsen, H. F., Lienert, U., Almer, J., Shastri, D., Sorensen, H. O., Gundlach, C., and Pantleon, W., (2006), “Formation and Subdivision of Deformation Structures During Plastic Deformation,” Science, 312, 889–892.CrossRefGoogle Scholar
Jackson, P. J. and Basinski, Z. S., (1967), “Latent Hardening and the Flow Stresses in Copper Single Crystal,” Canadian J. Physics, 45, 707–735.CrossRefGoogle Scholar
JIM (Japan Inst. Metals), (1985), Zairyo Kyodo no Genshi-ron (Atomistic Theory of Mechanics of Materials), JIM (in Japanese).Google Scholar
Johnson, P. E., Schmitt, J.-H., Vincent, S. A., and MorrisJr., J. W., (1990), “The Effect of Prestrain Temperatures on Dislocation Cell Formation and Subsequent Tensile Behavior in Low Carbon Steel Sheets,” Scripta Metall et Mater., 24, 1447–1452.CrossRefGoogle Scholar
Johnston, W. G. and Gilman, J. J., (1959), “Dislocation Velocities, Dislocation Densities, and Plastic Flow in Lithium Fluoride Crystals,” J. Appl. Phys., 33, 129–144.CrossRefGoogle Scholar
Johnston, W. G. and Gilman, J. J., (1960), “Dislocation Velocities, Dislocation Densities, and Plastic Flow in Lithium Fluoride Crystals,” UFN, 70, 489–514 (in Russian) https://doi.org/10.3367/UFNr.0070.196003c.0489.Google Scholar
Kadić, A. and Edelen, D. G. B., (1983), A Gauge Theory of Dislocations and Disclinations, Lecture Notes in Physics, 174, Springer.CrossRefGoogle Scholar
Kajiwara, N., Imiya, K., and Hasebe, T., (2013), “FTMP-based Modeling and Simulation of Magnesium,” Inter. J. Comp. Maters. Sci. Eng., 2, 1350022.CrossRefGoogle Scholar
Kalidindi, S. R., (2004), “A Crystal Plasticity Framework for Deformation,” in Continuum Scale Simulation of Engineering Materials (eds. Raab, D., Roters, F., Barlat, F., and Chen, L.-Q.), pp. 543–560, Wiley-VCH.CrossRefGoogle Scholar
Kambe, T. and Drazin, P. G., (1998), Fluid Dynamics, Stability and Turbulence, University of Tokyo Press.Google Scholar
Karashima, S., (1972), Kinzoku Gokin no Kyoudo (Strength of Metals and Alloys), Maruzen (in Japanese).Google Scholar
Karashima, S. and Kainuma, N., (1975), (See Nishiyama, Z. and Koda, S. (eds.)) MaruzenGoogle Scholar
Karashima, S., Oikawa, H., and Ogura, T., (1967), “Electron Microscopic Study of Substructure Developed around Fatigue Cracks,” J. Japan Inst. Metals, 31, 674–678 (in Japanese).CrossRefGoogle Scholar
Karashima, S., Oikawa, H., and Ogura, T., (1968), “Studies on Substructures around a Fatigue Crack in FCC Metals and Alloys,” Trans. Japan Inst. Metals, 9, 205–213.CrossRefGoogle Scholar
Karnthaler, H. P. and Winter, E., (1975), “Weak Beam TEM Studies of Composite Dislocations in F.C.C. Alloys” Acta Met., 23, 1501–1509.CrossRefGoogle Scholar
Kawasaki, K. and Matsuo, M., (1984), “Deformation Structures as Nucleation Sites for Recrystallization,” Tesu to Hagane, 70, 1808–1815.CrossRefGoogle Scholar
Kawata, K. and Shiori, J., (eds.), (1995), Constitutive Relation in High/Very High Strain Rates, IUTAM Symp., Noda, Japan, Springer.Google Scholar
Kelley, E. W. and Hosford, W. F. Jr. (1968a), “Plane-Strain Compression of Magnesium and Magnesium Alloy Crystals,” Trans. Metall. Soc. AIME, 242, 5–13.Google Scholar
Kelley, E. W. and Hosford, W. F. Jr. (1968b), “The Deformation Characteristics of Textured Magnesium,” Trans. Metall. Soc. AIME, 242, 654–661Google Scholar
Kestens, L. A. I. and Pirgazi, H., (2016), “Texture Formation in Metal Alloys with Cubic Crystal Structures,” Mater. Sci. Technol., 32, 1303–1315.CrossRefGoogle Scholar
Khachaturian, A. G., (1983), Theory of Structural Transformation in Solids, John Wiley and Sons.Google Scholar
Khan, A. S. and Huang, S., (1995), Continuum Theory of Plasticity, Wiley Interscience.Google Scholar
Kida, S. and Goto, S., (1997), “A Lagrangian Direct-Interaction Approximation for Homogeneous Isotropic Turbulence,” J. Fluid Mech., 345, 307–345.CrossRefGoogle Scholar
Kida, S. and Yanase, S., (1999), Mechanics of Turbulence (Ranryu Rikigaku), Asakura (in Japanese).Google Scholar
Kida, S., Itoh, T., Sakane, M., Ohnami, M., and Socie, D.F., (1997), “Dislocation Structure and Non-Proportional Hardening of Type 304 Stainless Steel,” Fatigue Fract. Eng. Mater. Struct., 20, 1375–1386CrossRefGoogle Scholar
Kimura, H., (1998), Zairyo Kyodo no Kangae-kata (A Perspective on Mechanics of Materials), AGNE Gijutu Center (in Japanese).Google Scholar
Kishimoto, M., (2004), “Study of Fatigue Crack Initiation Condition for Steels,” Master Thesis, Kobe University (in Japanese).Google Scholar
Kleinert, H., (1989), Gauge Fields in Condensed Matter, Vol. I & II, World Scientific.Google Scholar
Klepaczko, J. R., (1967), “Effect of Strain-Rate History on the Strain Hardening Curve of Aluminum,” Arch. Mech., 19, 211–228.Google Scholar
Klepaczko, J. R. (1968), “Strain Rate History Effects for Polycrystalline Aluminum and Theory of Intersections 1,” Mech. Phys. Solids, 16, 255–266.CrossRefGoogle Scholar
Klepaczko, J. R. (1981), “Strain Rate Incremental Test of Copper,” Tech. Rep. Div. Eng. Brown Univ. DMR-79-23257/2.Google Scholar
Klesnil, M., and Lukás, P., (1965), “Dislocation Arrangement in the Surface Layer of α-Iron Grains During Cyclic Loading,” J. Iron Steel Inst., 203, 1043–1048.Google Scholar
Kocks, U. F., (1964), “Latent Hardening and Secondary Slip in Aluminum and Sliver,” Trans. Met. Soc. AIME, 230, 1160–1167.Google Scholar
Kocks, U. F., (1970), “The Relation between Polycrystal Deformation and Single Crystal Deformation,” Metall. Trans., 1, 1121–1143.CrossRefGoogle Scholar
Kocks, U. F. (1976), “Laws for Work Hardening and Low-temperature Creep,” J. Eng. Mater. Tech., 98, 76–85.CrossRefGoogle Scholar
Kocks, U. F. and Brown, T. J., (1966), “Latent Hardening in Aluminum,” Acta Metall. 14, 87–98.CrossRefGoogle Scholar
Kocks, U. F., Argon, A. S., and Ashby, M. F. (1975), The Thermodynamics and Kinetics of Slip, Progress in Materials Science Series, 19, Pergamon Press.Google Scholar
Kocks, U. F., Tome, C. N., and Wenk, H.-R. (eds.), (1998), Texture and Anisotropy, Cambridge University Press.Google Scholar
Kocks, U. F., Tomé, C. N., and Wenk, H.-R., (2000), Texture and Anisotropy, Cambridge University Press.Google Scholar
Koda, S., (1993), Kinzoku Butsurigaku Josetsu (Introduction to Metal Physics), Corona Publishing Co. (in Japanese).Google Scholar
Kojima, K., (2001), “Effect of Strain Aging on High Strain Rate Deformation of Ultra Low Mild Steel Sheets,” in The Final Report of Research Group on High Speed Deformation of Steels for Automotive Use, p. 171, ISIJ (The Iron & Steel Inst. Japan).Google Scholar
Kolmogorov, A., (1941a), “The Local Structure of Turbulence in Incompressible Viscous Fluid for Very Large Reynolds Numbers,” Dokl. Akad. Nauk. SSSR, 30, 301–305 (reprinted in Proc. R. Soc. London, A, 434 (1991), 9–13).Google Scholar
Kolmogorov, A., (1941b), “On Degeneration (Decay) of Isotropic Turbulence in an Incompressible Viscous Liquid,” Dokl. Akad. Nauk. SSSR, 31, 338–341.Google Scholar
Kolmogorov, A., (1941c), “Dissipation of Energy in Locally Isotropic Turbulence,” Dokl. Akad. Nauk. SSSR, 32, 16–18 (reprinted in Proc. R. Soc. London, A, 434 (1991), 15–17).Google Scholar
Kolmogorov, A., (1941d), “On the Logarithmically Normal Law of Distribution of the Size of Particles under Pulverization,” Dokl. Akad. Nauk. SSSR, 31, 99–101.Google Scholar
Kondo, K. (1955), “Non-Riemannian Geometry of Imperfect Crystals from a Macroscopic Viewpoint,” RRAG Memoirs, 1 D-I, 458–469.Google Scholar
Kondo, K. (ed.), (1960), RAAG Memoirs of Unifying Study of Basic Problems in Engineering and Physical Science by Means of Geometry, Gakujutsu Bunken Fukyu-kai.Google Scholar
Kondo, K., (1968), “A Unified Derivation of the Fundamental Equations of Yielding and of Dual Yielding,” RAAG Memoirs, 4, 315–327.Google Scholar
Kondo, K., Hirano, Y., and Minagawa, S., (1962), “The Compensation of the Riemann-Christoffel Curvature Tensor by Dislocation Pairs,” RAAG Memoirs, 3 D-XI, 198–214.Google Scholar
Koslowski, M., Cuitino, A., Ortiz, M., LeSar, R., and Thomson, R., (2004), “Dislocation Patterns and the Deformation of Metals,” Paper presented at the 2004 TMS Ann. Meeting & Exhibition, Charlotte, NC., 17 March, The Minerals, Metals & Materials Society, www.ortiz.caltech.edu/presentations/pdf/tms-04.pdf.Google Scholar
Kratochvil, J., (1990a), “Derivation of Mughrabi’s Cellular Structure Model from Synergetics of Dislocations,” Scripta Metall. Mater., 24, 891–894.CrossRefGoogle Scholar
Kratochvil, J., (1990b), “Instability Origin of Dislocation Cell Misorientation,” Scripta Metall. Mater., 24, 1225–1228.CrossRefGoogle Scholar
Kröner, E., (1958), Kontinuumstheorie der Versetzungen und Eigenspanungen, Springer-Verlag.CrossRefGoogle Scholar
Kröner, E., (1961), “Zur Plastischen Verformung des Vielkristells,” Acta Metall., 9, 155–161.CrossRefGoogle Scholar
Kröner, E. (ed.), (1968), Interrelations between Various Branches of Continuum Mechanics, IUTAM Symp. Mech. Generalized Continua, Springer.CrossRefGoogle Scholar
Kröner, E., (1998), “Benefit and Non-Benefit of the Continuum Theory of Dislocations,” Workshop on Modelling of Dislocations and Their Impact on Materials’ Behavior, Staatliche Materialprüfungsanstalt, Stuttgart University, Pfaffenwaldring 32 D-70569 Stuttgart (July 22, 1998).Google Scholar
Kröner, E., (2001), “Benefits and Shortcomings of the Continuous Theory of Dislocations,” Int. J. Solids Struct., 38, 1115–1134.CrossRefGoogle Scholar
Kubin, L. P., (1996), “Dislocation Patterns: Experiment, Theory and Simulation,” in Stability of Materials (eds. Gonis, A., Turchi, P. E. A., and Kurdrnovsky, J.), Procs. NATO Advanced Study Institute on Stability of Materials, 1994, Greece, pp. 99–135, Plenum Press.CrossRefGoogle Scholar
Kubin, L. P. and Devincre, B., (1999), “From Dislocation Mechanisms to Dislocation Microstructures and Strain Hardening,” in Deformation-induced Microstructures: Analysis and Relation to Properties (Proc. 20th Risø Int. Symp. Maters. Sci.) (eds. Bilde-Soerensen, J. B., Carstensen, J. V., Hansen, N., Juul Jensen, D., Leffers, T., Pantleon, W., Pedersen, O. B., and Winther, G.), pp. 61–83, Department of Wind Energy, Roskilde Danish Technical University.Google Scholar
Kubin, L. P., Canova, G., Condat, G., Devincre, B., Pontikis, V., and Brechet, Y., (1992), “Dislocation Microstructures and Plastic Flow: 3D Simulation,” Solid State Phenomena, 23–24, 455–472.CrossRefGoogle Scholar
Kubo, R., Toda, M., and Hashisume, N., (1998) Statistical Physics II (Nonequilibrium Statistical Mechanics), 2nd ed, Springer.Google Scholar
Kuhlmann-Wilsdorf, D., (1989), “Theory of Plastic Deformation:-Properties of Low Energy Dislocation Structures,” Mater. Sci. Eng.: A, 113, 1–41.CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D., (1992), “Fundamentals of Cell and Subgrain Structures in Historical Perspective,” Scripta Metall. Mater., 27, 951–956.CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D., (1999a) “The Theory of Dislocation-Based Crystal Plasticity,” Phil. Mag. A, 79, 955–1008.CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D., (1999b), “‘Regular’ Deformation Bands (DBs) and the LEDS Hypothesis,” Acta Mater., 47, 1967–1712.CrossRefGoogle Scholar
Kuhlmann-Wilsdorf, D. and Hansen, N., (1991), “Geometrically Necessary, Incidental and Subgrain Boundaries,” Scripta Metall. Mater., 25, 1557–1562.CrossRefGoogle Scholar
Kumagai, J., Takaki, S., Suzuki, S., and Kimura, H., (1990), “Temperature Dependence of Work Hardening in High Purity Iron Single Crystals,” Mater. Trans., 31, 118–128.CrossRefGoogle Scholar
Kurzydlowski, K. J. and Ralph, B., (1995), The Quantitative Description of the Microstrcuture of Materials, CRC Press.Google Scholar
Kysar, J. W., Gan, Y. X., Morse, T. L., Chen, X., and Jones, M. E., (2007), “High Strain Gradient Plasticity Associated with Wedge Indentation into Face-centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities,” J. Mech. Phys. Solids, 55, 1554–1573.CrossRefGoogle Scholar
Lardner, R. W., (1974), Mathematical Theory of Dislocations and Fracture, University of Tronto Press.Google Scholar
Lavigne, D. M., (1997), “Ecological Interactions Between Marine Mammals, Commercial Fisheries, and Their Prey: Unravelling the Tangled Web,” Oceanogr. Lit. Rev., 44, 229–229.Google Scholar
Lazar, M., and Kirchner, H. O. K., (2007), “The Eshelby Stress Tensor, Angular Momentum Tensor and Scaling Flux in Micropolar Elasticity,” Int. J. Mech. Solids Struct., 44, 4613–4620.CrossRefGoogle Scholar
Lee, E. H., (1969), “Elastic-Plastic Deformations at Finite Strains,” ASME, J. Appl. Mech., 36, 1–6.CrossRefGoogle Scholar
LeSar, R. and Rickman, J. M., (2004), “Coarse Graining of Dislocation Structure and Dynamics,” in Continuum Scale Simulation of Engineering Materials (eds. Raab, D., Roters, F., Barlat, F., and Chen, L.-Q.), pp. 429–444, Wiley-VCH.CrossRefGoogle Scholar
Levine, L. E., Geantil, P., Larson, B. C., Tischler, J. Z., Kassner, M. E., Liu, W., Stoudt, M. R., and Tavazz, F., (2011), “Disordered Long-Range Internal Stresses in Deformed Copper and the Mechanisms Underlying Plastic Deformation,” Acta Mater., 59, 5803–5811.CrossRefGoogle Scholar
Lindholm, U. S., (1965), Dynamic Deformation of Metals, Behavior of Materials Under Dynamic Loading, Springer.Google Scholar
Lindholm, U. S., (1968), “Some Experiments in Dynamic Plasticity under Combined Stress,” in “Mechanical Behavior of Materials under Dynamic Loads,” pp. 77–95. Springer.CrossRefGoogle Scholar
Liu, Q. and Hansen, N., (1995), “Geometrically Necessary Boundaries and Incidental Dislocation Boundaries Formed During Cold Deformation,” Scripta Metall. Mater., 32, 1289–1295.CrossRefGoogle Scholar
Liu, Q., Jensen, D. J., and Hansen, N., (1998), “Effect of Grain Orientation on Deformation Structure in Cold-Rolled Polycrystalline Aluminum,” Acta Mater., 46, 5819–5838.CrossRefGoogle Scholar
Liu, W. K., Jun, S., and Zhang, Y. F. (1995), “Reproducing Kernel Particle Methods”, I. J. Numer. Methods Fluids, 20, 1081–1106.CrossRefGoogle Scholar
Livingston, J. D., (1960), “Etch Pits at Dislocations in Copper,” J. Appl. Phys., 31, 1071–1076.CrossRefGoogle Scholar
Livingston, J. D., (1962), “The Density and Distribution of Dislocations in Deformed Copper Crystals,” Acta Metall., 10, 229–239.CrossRefGoogle Scholar
Logan, R. W. and Hosford, W. F., (1980), “Upper Bound Anisotropic Yield Locus Calculation Assuming -Pencil Glide,” Int. J. Mech. Sci. 22, 419–430.CrossRefGoogle Scholar
Love, A. E. H., (1944), A Treatise on the Mathematical Theory of Elasticity, Dover Publications.Google Scholar
Lowe, T. C. and Valiev, R. Z., (eds.), (2000), Investigation and Applications of Severe Plastic Deformation, NATO Science Series, 3. High Technology, Kluwer.CrossRefGoogle Scholar
Lukas, P., Klesnil, M., and Fiedler, R., (1969), “Plastic Zone around the Propagating Fatigue Crack,” Phil. Mag., 18, 799–805.CrossRefGoogle Scholar
Lung, C. W. and March, N. H., (1999), Mechanical Properties of Metals (Atomistic and Fractal Continuum Approaches), World Scientific.CrossRefGoogle Scholar
Ma, B. and Laird, C., (1989a), “Overview of Fatigue Behavior of Copper Single Crystals,- I. Surface Morphology and Stage I Crack Initiation Sites for Tests at Constant Strain Amplitude,” Acta Metall., 37, 325–336.Google Scholar
Ma, B. and Laird, C., (1989b), “Overview of Fatigue Behavior of Copper Single Crystals,- II. Population, Size, Distribution and Growth Kinetics of Stage I Cracks for Tests at Constant Strain Amplitude,” Acta Metall., 37, 337–348.Google Scholar
Madec, R. and Kubin, L. P., (2004), “Dislocation Interactions and Symmetries in BCC Crystals,” in IUTAM Symp. Mesoscopic Dynamics of Fracture Process and Materials Strength (eds. Kitagawa, H. and Shibutani, Y.), pp. 69–78, Springer.CrossRefGoogle Scholar
Maeda, K. and Takeuchi, S., (2011), “Physics of Crystal Defects (Kessho Kekkan no Butsuri),” Shokabo, p. 151 (in Japanese).Google Scholar
Maki, T., Tsuzaki, K., and Tamura, I., (1979), “The Construction of Lath Martensite,” Tetsu-to-Hagane, 65, 515–524.CrossRefGoogle Scholar
Malvern, L. E., (1969), Introduction to the Mechanics of Continuous Media, Prentice-Hall.Google Scholar
Malygin, G. A., (2004), “Analysis of the Parameters of a Submicron Dislocation Structure in Metals Subjected to Severe Plastic Deformation,” Phys. Solid State, 46, 2035–2041.CrossRefGoogle Scholar
Marian, J., Cai, W., and Bulatov, V. V., (2004), “Dynamic Transitions from Smooth to Rough to Twining in Dislocation Motion,” Nat. Mater., 3, 158–163.CrossRefGoogle Scholar
Martin, J. W., Doherty, R. D., and Cantor, B., (1976), “Instability due to Strain Energy,” in Stability of Microstructure in Metallic Systems (eds. Martin, J. W. and Doherty, R. D.) pp. 147–218, Cambridge University Press.Google Scholar
Marukawa, K., (1967), “Dislocation Motion in Copper Single Crystal,” J. Phys. Soc. Japan, 22, 499–510.CrossRefGoogle Scholar
May, R. M., (1973), Stability and Complexity in Model Ecosystems, Princeton University Press.Google ScholarPubMed
McDavid, A. W. and McMullen, C. D., (2006), “Generalizing Cross Products and Maxwell’s Equations to Universal Extra Dimension,” (http://arxiv.org/abs/hep-ph/0609260).Google Scholar
McDowell, D. L., (ed.), (2005), “Plasticity of Heterogeneous Materials,” Int. J. Plasticity, 21, 2051–2254.CrossRefGoogle Scholar
McQueen, H. J., (1988), “Initiating Nucleation of Dynamic Recrystallization, Primarily in Polycrystals,” Mat. Sci. Eng. A, 101, 149–160.CrossRefGoogle Scholar
Mecking, H. and Kocks, U. F., (1981), “Kinetics of Flow and Strain-Hardening,” Acta Metall., 29, 1865–1875.CrossRefGoogle Scholar
Meinhardt, H. and Gierer, A., (1974), “Applications of a Theory of Biological Pattern Formation Based on Lateral Inhibition,” J. Cell. Sci., 15, 321–346.CrossRefGoogle ScholarPubMed
Mekala, S., Eisenlohr, P., and Blum, W., (2011), “Control of Dynamic Recovery and Strength by Subgrain Boundaries – Insights from Stress-Change Tests on CaF2 Single Crystals,” Phil. Mag., 91, 909–932.CrossRefGoogle Scholar
Meyers, M. A., Murr, L. E., Staudhammer, K. P., (eds.), (1992), Shock-Wave and High-Strain-Rate Phenomena in Materials, Marcel Dekker.Google Scholar
Miekk-oja, H. M. and Lindroos, V. K., (1975), “Dislocation Structures in Deformation at Elevated Temperatures,” in Constitutive Equations in Plasticity (ed. Argon, A. S.), pp. 327–358, MIT Press.Google Scholar
Miguel, M.-C., Vespignanl, A., Zapperi, S., Weiss, J., and Grasso, J.-R., (2001a), “Intermittent Dislocation Flow in Viscoplastic Deformation,” Nature, 410, 667–671.CrossRefGoogle ScholarPubMed
Miguel, M.-C., Vespignanl, A., Zapperi, S., Weiss, J. and Grasso, J.-R., (2001b), “Complexity in Dislocation Dynamics: Model,” Maters. Sci. Engng.: A, 390, 324–327.CrossRefGoogle Scholar
Mika, D. P. and Dawson, P. R., (1999), “Polycrystal Plasticity Modeling of Intracrystalline Boundary Textures,” Acta Mater., 47, 1355–1369.CrossRefGoogle Scholar
Miklashevich, I., (2008), Micromechanics of Fracture in Generalized Spaces, Academic Press, Elsevier.Google Scholar
Mindlin, R. D., (1964), “Microstructure in Linear Elasticity,” Arch. Rat. Mech. Anal., 16, 51–78.CrossRefGoogle Scholar
Minagawa, S. (1962), “Riemannian Three-Dimensional Stress Function Space,” RAAG Memoirs, III, 69–81.Google Scholar
Minagawa, S., (1968), “On Some Generalized Features of the Theory of Stress-Function Space with Reference to the Problem of Stresses in a Curved Membrane,” RAAG Memoirs, 4, 159–170.Google Scholar
Minagawa, S. and Nishida, T., (1972), “Stress Produced by a Continuous Distribution of Moving Dislocations in an Isotropic Continuum,” Phys. Rev. Lett., 28, 353–355.CrossRefGoogle Scholar
Minagawa, S. and Ogata, H., (1990), “On the Basic Components of the Interaction Energy Between Two Infinitesimal Circular Defects in an Isotropic Elastic Body,” in Micromechanics and Inhomogeneity (eds. Weng, G. J., Taya, M., and Abe, H.), pp. 257–268, Springer-Verlag.CrossRefGoogle Scholar
Mino, K., Fukuoka, C., and Yoshizawa, H., (2000), “Evolution of Intergranular Misorientation during Plastic Deformation,” J. JIM, 64, 50–55 (in Japanese).Google Scholar
Miyazaki, S. and Fujita, H. (1978), “Effects of Grain Size and Specimen Thickness on Mechanical Properties of Polycrystalline Copper and Copper-Aluminum Alloy,” Trans. JIM, 19, 438–444.CrossRefGoogle Scholar
Miyazaki, S. and Fujita, H., (1979), “Dynamic Observation of the Process of Band Formation in Polycrystalline Iron,” Trans. JIM., 20, 603–608.CrossRefGoogle Scholar
Miyazaki, S., Shibata, K., and Fujita, H., (1979), “Effect of Specimen Thickness on Mechanical Properties of Polycrystalline Aggregates with Various Grain Sizes,” Acta Metall., 27, 855–862.CrossRefGoogle Scholar
Morgan, J. W., (1996), The Sieberg-Witten Equations and Applications to the Topology of Smooth Four-Manifolds, Math. Notes 44, Princeton University Press.Google Scholar
Mughrabi, H., (1971), “Elektronenmikroskopische untersuchung der versetzungsanordnung verformter kupfereinkristalle im belasteten zustand,” Phil. Mag., 23, 869–895.CrossRefGoogle Scholar
Mughrabi, H., (1981), Continuum Models of Discrete Systems 4 (CMDS 4): Int. Conf. Proc. 4 (eds Brulin, O. and Hsieh, R.K.T.), p. 241, North Holland.Google Scholar
Mughrabi, H., (1983), “Dislocation Wall and Cell Structures and Long-Range Internal Stresses in Deformed Metal Crystals,” Acta Metall., 31, 1367–1379.CrossRefGoogle Scholar
Mughrabi, H. and Christ, H.-J., (1997), “Cyclic Deformation and Fatigue of Selected Ferritic and Austenitic Steels: Specific Aspects,” ISIJ Int., 37, 1154–1169.CrossRefGoogle Scholar
Mughrabi, H., Ackerman, F., and Herz, K., (1979), “Persistent Slip Bands in Fatigued Face-Centered and Body-Centered Cubic Metals,” in Fatigue Mechanics, Special Technical Publication 675 (ed. Long, J.), pp. 69–105, American Society for Testing and Materials (ASTM), https://doi.org/10.1520/STP35885S.CrossRefGoogle Scholar
Mughrabi, H., Ungar, T., Kienle, W., and Wilkens, M., (1986), “Long-Range Internal Stress and Asymmetric X-Ray Line Broadening in Tensile Deformed [001]-Oriented Copper Single Crystals,” Phil. Mag. A, 53, 793–813.CrossRefGoogle Scholar
Mura, T., (1963), “Continuous Distribution of Moving Dislocations,” Phil. Mag, 16, 843–857.CrossRefGoogle Scholar
Mura, T., (1970), “Stress and Velocity Field Produced by Uniformly Moving Dislocations in Anisotropic Media,” Phil. Mag, 21, 235–237.Google Scholar
Mura, T., (1982), Micromechanics of Defects in Solids, Kluwer Academic Publications. ((1998), 2nd revised ed.)CrossRefGoogle Scholar
Murr, L. E., (1981), “Residual Microstructure – Mechanical Property Relationships in Shock-Loaded Metals and Alloys,” in Shock Waves and High-Strain-Rate Phenomena in Metals, (eds. Meyers, M. A. and Murr, L. E.), pp. 607–674, Plenum.CrossRefGoogle Scholar
Murr, L. E. (2015), Handbook of Materials Structures, Properties, Processing and Performance, Springer.CrossRefGoogle Scholar
Murr, L. E. (2016), “Dislocation Ledge Sources: Dispelling the Myth of Frank–Read Source Importance,” Metall. Maters. Trans. A, 47, 5811–5826.CrossRefGoogle Scholar
Murr, L. E. and Kuhlmann-Wilsdorf, F., (1978), “Experimental and Theoretical Observations on the Relationship between Dislocation Cell Size, Dislocation Density, Residual Hardness, Peak Pressure and Pulse Duration in Shock-Loaded Nickel, “Acta Metall., 26, 847–857.CrossRefGoogle Scholar
Murr, L. E., Rivas, J. M., Ferreyra, E., and Sanchez, J. C., (1996), “A Comparison of Deformation Twins and Deformation-Induced Microbands in Copper,” in Microstructural Science, (eds. Burke, M. G., Clark, E. A., and Palmiere, E. J.), pp. 121–131, ASM International.Google Scholar
Nadgornyi, E., (1988), “Dislocation Dynamics and Mechanical Properties of Crystals,” Progress in Maters. Sci., 31, 1–536.CrossRefGoogle Scholar
Nagayama, K., (2003), “Seibutsu-Butsurigaku no Kenkyu to Kyoiku (Research and Education in Bio-physics),” in Seibutsu Butsurigaku to ha Nanika (What is Bio-Physics?), New Bio-Physics Series II-10, (eds. Sogabe, M. and Go, N.), pp. 191–210, Kyoritsu Shuppan (in Japanese).Google Scholar
Nakada, Y. and Keh, A. S., (1966), “Latent Hardening in Iron Single Crystals,” Acta Metall., 14, 961–973.CrossRefGoogle Scholar
Needleman, A., Asaro, R. J., Lemonds, J., and Peirce, D., (1985), “Finite Element Analysis of Crystalline Solids,” Comput. Methods Appl. Mech. Enging., 52, 689–708.CrossRefGoogle Scholar
Nemat-Nasser, S., (2004), Plasticity, A Treatise on Finite Deformation of Heterogeneous Inelastic Materials, Cambridge University Press.Google Scholar
Nemat-Nasser, S. and Issacs, J. B., (1997), “Direct Measurement of Isothermal Flow Stress of Metals at Elevated Temperatures and High Strain Rates with Application to Ta and Ta-Alloys,” Acta Mater. 45, 907–911.CrossRefGoogle Scholar
Nemat-Nasser, S., Isaacs, J. B., and Liu, M., (1998), “Microstructure of High-Strain, High-Strain-Rate Deformed Tantalum,” Acta Materialia, 46, 1307–1325.CrossRefGoogle Scholar
Nesterova, E. V., Bacroix, B., and Teodosiu, C., (2001), “Microstructure and Texture Evolution under Strain-Path Changes in Low-Carbon Interstitial-Free Steel,” Metall. Maters. Trans. A, 32, 2527–2538.CrossRefGoogle Scholar
NIMS (National Institute for Materials Science), (2003), “Understanding Steel Materials of the Near Future,” Nos.1 and 2, p. 14 (in Japanese) www.nims.go.jp/stx-21/jp/publications/stpanf/pdf/gappon.pdfGoogle Scholar
Nishino, S., Hamada, N., Sakane, M., Ohnami, M., Matsumura, N., and Tokizane, M., (1986), “Microstructural Study of Cyclic Strain Hardening Behavior in Biaxial Stress States at Elevated Temperature,” Fatigue & Fract. Engng. Mater. Struct., 9, 65–77.CrossRefGoogle Scholar
Nishino, S., Sakane, M., and Ohnami, M., (1984), “An X-Ray Study of Damage Evaluation in Low-Cycle Fatigue of an Austenitic Stainless Steel at High Temperature,” J. Soc. Maters. Sci., 33, 384–390 (in Japanese).CrossRefGoogle Scholar
Nishioka, T. and Atluri, S. N., (1983), “Path-Independent Integrals, Energy Release Rates, and General Solutions of Near-Tip Fields in Mixed-Mode Dynamic Fracture Mechanics,” Eng. Fract. Mech., 18, 1–22.CrossRefGoogle Scholar
Nishiyama, Z. and Koda, S. (eds.), (1975), Kinzoku no Denshi-Kenbikyo Shyashin to Kaisetsu (Electron Micrographs of Metals and Descriptions), Maruzen (in Japanese).Google Scholar
Noether, E., (1971), “Invariant Variation Problems,” Transp. Theory and Stat. Phys., 1, 183–207.CrossRefGoogle Scholar
Nye, J. F., (1953), “Some Geometrical Relations in Dislocated Crystals,” Acta Metall., 1, 153–162.CrossRefGoogle Scholar
Oda, M. and Iwashita, K. (eds.), (1999), Mechanics of Granular Materials: An Introduction, A.A. Balkema.Google Scholar
Ogura, T. and Karashima, S., (1969), “Calculation of Growth Rate of Crack Considering Diffusion of Vacancies along Subgrain Boundaries or Dislocations,” Trans. Japan Inst. Metals, 10, 292–293.CrossRefGoogle Scholar
Ogura, T., Karashima, S., and Tsurikame, K., (1975), “Propagation of Fatigue Cracks in Aluminium at Low Temperatures,” Trans. Japan Inst. Metals, 16, 43–48.CrossRefGoogle Scholar
Ohashi, T., (1990), “Analysis of Multiple Slip in Copper Tricrystals,” Coll. de Phys. C, 1, 593–598.Google Scholar
Ohashi, T., (1997), “Finite-Element Analysis of Plastic Slip and Evolution of Geometrically Necessary Dislocations in FCC Crystals,” Phil. Mag. Lett., 75, 51–57.CrossRefGoogle Scholar
Ohashi, T., (1999), “Evaluation and Visualization of Geometrically Necessary Dislocations in Metal Microstructures by Means of Continuum Mechanics Analysis,” J. Phys. IV France (Proc. EUROMECH-MECHAMAT’98), 9, 279–284.CrossRefGoogle Scholar
Ohashi, T. and Sawada, W., (2002), “Long Range Elastic Stress Field in Two Dimensional Polycrystals,” Orally presented at Mech. Eng. Cong. 2002, Japan (MECHJ-02), JSME.Google Scholar
Ohnami, M., (1988), Plasticity and High Temperature Strength of Materials, Elsevier Applied Science.Google Scholar
Ohnami, M., (1998), Yume, Sore wa JItusgen suru mono (Dreams, They are meant to Come True), Technolife Series, Ohmsha (in Japanese).Google Scholar
Ojima, M., Adachi, Y., Suzuki, S., and Tomota, Y., (2011), “Stress Partitioning Behavior in an FCC Alloy Evaluated by the In Situ/Ex Situ EBSD-Wilkinson Method,” Acta Mater., 59, 4177–4185.CrossRefGoogle Scholar
Okada, Y. and Hirokawa, N., (1999), “A Processive Single-Headed Motor: Kinesin Superfamily Protein KIF1A,” Science, 283, 1152–1157.CrossRefGoogle ScholarPubMed
Okuda, S., (1985), Zairyo Kyodo no Genshi-ron (Atomistic Theory of Strength of Materials), Japan Inst. Metals Maters. (JIMM) (in Japanese).Google Scholar
Okuda, T., Imiya, K., and Hasebe, T., (2013), “FTMP-based Simulation of Twin Nucleation and Substructure Evolution under Hypervelocity Impact,” Inter. J. Comp. Maters. Sci. Eng., 2, 1350021 (14 pages).Google Scholar
Oliferuk, W., Świa̧tnicki, W. A., and Grabski, M. W., (1995), “Effect of the Grain Size on the Rate of Energy Storage during the Tensile Deformation of an Austenitic Steel,” Maters. Sci. Eng.: A, 197, 49–58.CrossRefGoogle Scholar
Onuki, A. and Furukawa, A., (2001), “Phase Transitions of Binary Alloys with Elastic Inhomogeneity,” Phys. Rev. Lett., 86, 452–455.CrossRefGoogle ScholarPubMed
Oosawa, F., (2000), “The Loose Coupling Mechanism in Molecular Machines of Living Cells,” Genes to Cells., 5, 9–16.CrossRefGoogle ScholarPubMed
Oosawa, F. and Hayashi, S., (1986), “The loose Coupling Mechanism in Molecular Machines of Living Cells,” Adv. In Biophys., 22, 151–183.CrossRefGoogle ScholarPubMed
Orowan, E., (1934a), “Zur I. Tieftemperaturplastizitat und Beckersche Formel,” Z. Phys., 89, 605–613.CrossRefGoogle Scholar
Orowan, E., (1934b), “Zur II. Die dynamische Affassung der” Z. Phys., 89, 634–659.CrossRefGoogle Scholar
Orowan, E., (1948), “Untitled Paper Presented at a Symposium on Internal Stresses in Metals and Alloys,” Inst. Metals, London.Google Scholar
Ortiz, M. and Repetto, E. A., (1999), “Nonconvex Energy Minimization and Dislocation Structures in Ductile Single Crystals,” J. Mech. Phys. Solids, 397–462.CrossRefGoogle Scholar
Osipov, V. A., (1991), “Nonlinear Elastic Problems in Dislocation Theory: A Gauge Approach,” J. Phys. A: Math. Gen., 24, 3237–3244.CrossRefGoogle Scholar
Pan, J. and Rice, J. R., (1983), “Rate Sensitivity of Plastic Flow and Implications for Yield-Surface Vertices,” Int. J. Solids Structs., 19, 973–987.CrossRefGoogle Scholar
Pauli, W., (1933), “Die allgemeinen Prinzipien der Wellenmechanik,” Handbuch der Physik, XXIV, 21–192.Google Scholar
Perrin, C., Berbenni, S., Vehoff, H., and Berveiller, M., (2010), “Role of Discrete Intragranular Slip on Lattice Rotations in Polycrystalline Ni: Experimental and Micromechanical Studies,” Acta Mater, 58, 4639–4649.CrossRefGoogle Scholar
Perzyna, P., (1974), “The Constitutive Equations Describing Thermomechanical Behavior of Materials at High Rates of Strain,” in Mechanical Properties at High Rates of Strain (Proc. Conf. held in Oxford, 2–4 April 1974), London and Bristol, pp. 138–153, Inst. Phys. Conf. Ser. 21, Institute of Physics.Google Scholar
Phillips, R., (2001), Crystals, Defects and Microstructures, Modeling Across Scales, Cambridge University Press.CrossRefGoogle Scholar
Polanyi, M., (1934), “Über eine Art Gitterstörung, die einen Kristall plastich machen Könnte,” Z. Phys., 89, 660–664.CrossRefGoogle Scholar
Polanyi, M., (1968), “Life’s Irreducible Structure,” Science, 160, 1308–1312.CrossRefGoogle ScholarPubMed
Prinz, F. and Argon, A. S., (1980), “Dislocation Cell Formation during Plastic Deformation of Copper Single Crystals,” Phys. Stat. Solids., 57, 741–753.CrossRefGoogle Scholar
Prinz, F., Argon, A. S., and Moffatt, W. C., (1982), “Recovery of Dislocation Structures in Plastically Deformed Copper and Nickel Single Crystals,” Acta Metall., 30, 821–830.CrossRefGoogle Scholar
PSJ (Physical Society of Japan), (1981), Randamu-kei no Butsuri-gaku (Physics of Random Systems), Baifu-kan (in Japanese).Google Scholar
PSJ (Physical Society of Japan), (1998), Randamu-kei no Butsurigaku (Physics of Random Systems), 2nd edn., Baifu-kan (in Japanese).Google Scholar
Raj, S. V. and Pharr, G. M., (1986), “Compilation and Analysis of Data for the Stress Dependence of the Subgrain Size,” Mater. Sci. Eng., 81, 217–237.CrossRefGoogle Scholar
Randle, V., (1994), “Grain Assemblage in Polycrystals,” Acta Metall. Mater.,” 42, 1769–1784.CrossRefGoogle Scholar
Rasmussen, T., Jacobsen, K. W., Leffers, T., Pedersen, O. B., Srinivasan, S. G., and Jónsson, H., (1997), “Atomistic Determination of Cross-Slip Pathway and Energetics,” Phys. Rev. Letts., 79, 3676–3679.CrossRefGoogle Scholar
Repetto, E. A. and Ortiz, M., (1997), “A Micromechanical Model of Cyclic Deformation and Fatigue Crack Nucleation in FCC Single Crystals,” Acta Mater., 45, 2577–2595.CrossRefGoogle Scholar
Rice, J. R., (1968), “A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks,” Trans. ASME: J. Appl. Mech.,” E, 35, 379–386.CrossRefGoogle Scholar
Richeton, T., Berbenni, S., and Berveiller, M., (2009), “Grain-Size Dependent Accommodation Due to Intragranular Distributions of Dislocation Loops,” Acta Mater., 57, 1347–1356.CrossRefGoogle Scholar
Robertson, C. F. and Fivel, M. C., (1999), “A Study of the Submicron Indent-induced Plastic Deformation,” J. Mater. Res., 14, 2251–2258.CrossRefGoogle Scholar
Roesler, J., Harders, J., and Baeker, M., (2007), “Mechanical Behavior of Metals,” in Mechanical Behavior of Engineering Materials, 165–225, Springer.CrossRefGoogle Scholar
Rollett, A. D. and Wright, S. I., (1998), “Typical Texture in Metals,” in Texture and Anisotropy (eds. Kocks, U. F., Tome, C. N., and Wenk, H.-R.), pp. 178–238, Cambridge University Press.Google Scholar
Rosenfield, A. R. and Hahn, G. T., (1974), “Numerical Descriptions of the Ambient Low-Temperature, and High-Strain Rate Flow and Fracture Behavior of Plain Carbon Steel,” Trans. ASM, 59, 138.Google Scholar
Sagui, C., Somoza, A. M., and Desai, R. C., (1994), “Spinodal Decomposition in an Order-Disorder Phase Transition with Elastic Fields,” Phys. Rev. E, 50, 4865–4879.CrossRefGoogle Scholar
Sakino, K., (2000), “Transition on Rate Controlling Mechanism of FCC Metals at Very High Strain Rates and High Temperatures,” J. Phy. IV France, 10, 57–62.Google Scholar
Sakino, K., (2003), “Strain Rate Dependency of Dynamic Flow Stress of Iron in Wide Strain Rate Range,” J. Phys. IV France, 110, 93–98.CrossRefGoogle Scholar
Sakino, K., (2018), “Measurement of Dynamic Flow Stress at Very High Strain Rates using Hopkinson Pressure Bar with Minimum Diameter,” in Proc. 67th JSMS Ann. Meeting, May, 2018, pp. 131–132, Kochi Inst. Technol., Japan (in Japanese).CrossRefGoogle Scholar
Sakino, K., (2020), “Measurements of Flow Stress at Strain Rates of 100,000/sec and Strain Rate Dependence of Flow Stress of Iron in Wide Strain Rate Range,” Proc. 13th Symp. Impact Behavior of Materials (held on-line),” Oct. 2020, Kyoto, Japan, JSMS (in Japanese).Google Scholar
Sakino, K., (2021), “Strain Rate Dependence of Dynamic Flow Stress of 6066-T6 Aluminum Alloy at Strain Rates ranging from 1×103 to 4×104 s−1,” J. Soc. Maters. Sci. Japan, 70, 237–243.CrossRefGoogle Scholar
Sakino, K. and Shioiri, J., (1991), “Dynamic Flow Stress Response of Aluminum to Sudden Reduction in Strain Rate at Very High Strain Rates,” J. de Physique III, 1, C3–35.Google Scholar
Satake, M., (1978), “Constitution of Mechanics of Granular Materials through Graph Theory,” in Proc. US-Japan Seminar on Continuum-Mechanical and Statistical Approaches in the Mechanics of Granular Materials (eds. Cowin, S. C. and Satake, M.), pp. 47–61, Gakujyutu Bunken Fukusyakai.Google Scholar
Schutz, B. F., (1985), A First Course in General Relativity, Cambridge University Press.Google Scholar
Sedláček, R., (1995), “Internal Stresses in Dislocation Wall Structures,” Scripta Met. Mater., 33, 283–288.CrossRefGoogle Scholar
Sethna, J. P., Coffman, V. R., and Demler, E., (2003), “Scaling in Plasticity-Induced Cell- Boundary Microstructure: Fragmentation and Rotational Diffusion,” Phys. Rev. B, 67, 184107–184115.CrossRefGoogle Scholar
Shehadeh, M. A., Zbib, H. M., and de la Rubia, T. D., (2005), “Multiscale Dislocation Dynamics Simulations of Shock Compression in Copper Single Crystal,” Int. J. Plasticity, 21, 2255–2448.CrossRefGoogle Scholar
Shenoy, V. B., Kukta, R. V., and Philips, R., (2000), “Mesoscopic Analysis of Structure and Strength of Dislocation Junctions in FCC Metals,” Phys. Rev. Lett. 84, 1491–1494.CrossRefGoogle ScholarPubMed
Shimokawa, T., Nakatani, A., and Kitagawa, H., (2005), “Grain-size Dependence of the Relationship Between Intergranular and Intragranular Deformation of Nanocrystalline Al by Molecular Dynamics Simulations,” Phys. Rev. B, 71, 1–8.CrossRefGoogle Scholar
Shimura, T., (2000), Shitashimu Kotai Kozo Ron (Easy Access to Theory of Solid Structures), Asakura Shoten (in Japanese).Google Scholar
Shiotani, T., (1989), “Simulation of Continuum Dislocation Model,” Science of Machine, 41, 149–152 (in Japanese)Google Scholar
Shioya, T., (1989), “Simulations by Continuously-Distributed Dislocation Models,” in Computational Mechanics [I] (ed. Yagawa, G.), pp. 180–188, Yokendo (in Japanese).Google Scholar
Sogabe, M. and Go, N. (eds.), (2003), Seibutsu Butsurigaku to ha Nanika (What is Bio-Physics?), New Bio-Physics Series II-10, Kyoritsu Shuppan (in Japanese).Google Scholar
Staker, M. R. and Holt, D. L., (1972), “The Dislocation Cell Size and Dislocation Density in Copper Deformed at Temperatures between 25 and 700°C,” Acta Metall., 20, 569–579.CrossRefGoogle Scholar
Stuwe, H. P., (1997), “Experimental Aspects of Crystal Plasticity” in Large Plastic Deformation of Crystalline Aggregates (ed. Teodosiu, C.), pp. 1–20, Springer.Google Scholar
Sugimoto, K. et al., (1991), Zairyo Soshikigaku (Structures in Materials), Asakura (in Japanese).Google Scholar
Sugita, K., Okamoto, Y., and Sekine, M., (1998), Path Integrals and Quantum Electrodynamics, Morikita Shuppan (in Japanese).Google Scholar
Suzuki, H., (1967), Teni-ron Nyumon (Introduction to Dislocation Theory), Agne (in Japanese).Google Scholar
Suzuki, H., (1970), “Effect of Zero-Point Motion on Peierls Stress,” in Fundamental Aspects of Dislocation Theory (eds. Simmons, J. A., deWitt, R., and Bullough, R.), pp. 253–272, National Bureau of Standards.Google Scholar
Suzuki, S., Isshiki, M., and Mimura, K.,” (2005), “Purification and a Few Properties of High-Purity Iron,” Ferrum (Bulletin of ISIJ), 10, 491–496 (in Japanese).Google Scholar
Swann, P. R., (1963), “Dislocation Arrangements in Face-Centered Cubic Metals and Alloys,” in Electron Microscopy and Strength of Crystals (Proc. The first Berkeley Int. Maters. Conf.: The Impact of Transmission Electron Microscopy on Theories of the Strength of Crystals) (eds. Thomas, G. and Washburn, J.), pp. 131–182, Interscience.Google Scholar
Székely, F., Groma, I., and Lendvai, J., (2002), Characterization of Self-similar Dislocation Structures by X-ray Diffraction, Maters. Sci. Eng.: A, 324, 179–182.CrossRefGoogle Scholar
Tabata, T., Fujita, H., Hiraoka, M., and Onishi, K., (1983), “Dislocation Behaviour and the Formation of Persistent Slip Bands in Fatigued Copper Single Crystals Observed by High-Voltage Electron Microscopy,” Phil. Mag.: A, 47, 841–857.CrossRefGoogle Scholar
Takahashi, H., (1999), Takessho Soei-ron (Polycrystalline Plasticity), Corona (in Japanese).Google Scholar
Takahashi, M. and Bhadeshia, H. K. D. H., (1990), “Model for Transition from Upper to Lower Bainite,” Mater. Sci. Technol., 6, 592–603.CrossRefGoogle Scholar
Takahashi, Y., (1997), Taryoushi Mondai kara Banoryoushiron e (From Many-Particle Problems to Quantum Field Theory), Kodansha Scientific (in Japanese).Google Scholar
Takamura, J., (1999), Zairyo Kyodo no Kiso (Fundamentals of Mechanics of Materials), Kyoto University Press (in Japanese).Google Scholar
Takeuchi, S., (1991), “Dislocation (Part 3),” Kotaibutsuri (Sol. State. Phys.), 26, 121–126. (in Japanese).Google Scholar
Takeuchi, S., (2013), Kessho Sosei-ron (Crystalline Plasticity), Uchida Rokakuho (in Japanese).Google Scholar
Takeuchi, S. and Argon, A. S., (1976), “Steady-State Creep of Single-Phase Crystalline Matter at High Temperature,” J. Maters. Sci., 11, 1542–1566.CrossRefGoogle Scholar
Tamura, I., Tomota, Y., Yamaoka, Y., Kanatani, S., Ozawa, M., and Akao, A., (1973), “The Strength and Ductility of Two-phase Iron Alloys,” Testu-to-Hagane, 59, 454–468.CrossRefGoogle Scholar
Tanaka, E., Murakami, S., and Ooka, M., (1985a), “Dependence of Strain-Hardening under Multiaxial Non-Proportional Cyclic Plastic Deformation on Geometry History of Plastic Strain Trajectory,” Trans. JSME: A, 51, 1941–1950.CrossRefGoogle Scholar
Tanaka, E., Murakami, S., and Ooka, M., (1985b), “Dependence of Strain-Hardening under Multiaxial Non-Proportional Cyclic Plastic Deformation on Amplitude History of Plastic Strain,” Trans. JSME: A, 51, 2162–2172.CrossRefGoogle Scholar
Tang, M., Devincre, B., and Kubin, L. P., (1999), “Simulation and Modelling of Forest Hardening in Body Centre Cubic Crystals at Low Temperature,” Modell. Simul. Maters. Sci. Eng., 7, 893–908.CrossRefGoogle Scholar
Tanino, M. and Suzuki, S., (2001), Tekko Zairyo no Kagaku (Science of Steels), Uchida Rokakuho (in Japanese).Google Scholar
Taylor, G. I., (1934a), “The Mechanism of Plastic Deformation of Crystals. Part I.-Theoretical-,” Proc. Roy. Soc. London, A, 145, 362–387.Google Scholar
Taylor, G. I., (1934b), “The Mechanism of Plastic Deformation of Crystals. Part II.-Comparison with Observations-,” Proc. Roy. Soc. London, A, 145, 388–404.Google Scholar
Teodosiu, C., (1997), “Dislocation Modeling of Crystalline Plasticity,” in Large Plastic Deformation of Crystalline Aggregates (ed. Teodosiu, C.), pp. 21–80, Springer.CrossRefGoogle Scholar
Teodosiu, C., Raphanel, J. L., and Tabourot, L., (1992), “Finite Element Simulation of the Large Elastoplastic Deformation of Multicrystals,” in Large Plastic Deformations. Fundamentals and Applications to Metal Forming (Proc. MECAMAT’ 91) (eds. Teodosiu, C., Sidorof, F., and Raphanel, J. L.), pp. 153–168, Balkema.Google Scholar
Terada, K. and Kikuchi, N., (2001), “A Class of General Algorithms for Non-linear Multi-scale Analyses of Heterogeneous Media,” Comput. Methods Appl. Mech. Eng., 190, 5427–5464.CrossRefGoogle Scholar
Terada, K., Watanabe, I., and Akiyama, M., (2006), “Effects of Shape and Size of Crystal Grains on the Strengths of Polycrystalline Metals,” Int. J. Mult. Comp. Eng., 4, 445–460.CrossRefGoogle Scholar
Toda, M., Kubo, R., and Saito, N., (1998), Statistical Physics I (Equilibrium Statistical Mechanics), 2nd. edn., Springer.Google Scholar
Tokunaga, M., (2001), Shin Seibutsu-Butsurigaku no Saizensen (The Front Line of Bio-physics), pp. 96–121, The Biophysical Society of Japan (BSJ) (in Japanese).Google Scholar
Tomota, Y., (2001), “Effect of Strain Rate on Deformation Behavior (Overview),” in The Final Report of Research Group on High-Speed Deformation of Steels for Automotive Use, pp. 65–84, ISIJ.Google Scholar
Toupin, R. A., (1962), “Elastic Materials with Couple Stresses,” Arch. Rat. Mech. Anal., 11, 385–414.CrossRefGoogle Scholar
Toupin, R. A., (1964), “Theories of Elasticity with Couple-stress,” Arch. Rat. Mech. Anal., 17, 85–112.CrossRefGoogle Scholar
Truesdell, C. and Noll, W., (2003), The Non-Linear Field Theories of Mechanics, 3rd ed., Springer.Google Scholar
Tsuji, N., (2006), “Production of Bulk Nanostructured Metals by Accumulative Roll Bonding (ARB) Process,” in Severe Plastic Deformation (ed. Altan, B. S.), pp. 543–564, Nova Science Publishers.Google Scholar
Tsuji, N., Ogata, S., Inui, H., Tanaka, I., Kishida, K., Gao, S., Mao, W., Bai, Y., Zheng, R., and Du, J.-P., (2020), “Strategy for Managing both High Strength and Large Ductility in Structural Materials – Sequential Nucleation of Different Deformation Modes Based on a Concept of Plaston,” Scripta Mater., 181, 35–42.CrossRefGoogle Scholar
Tucker, G. J. and McDowell, D. L., (2011), “Non-equilibrium Grain Boundary Structure and Inelastic Deformation using Atomistic Simulations,” Int. J. Plasticity, 27, 841–857.CrossRefGoogle Scholar
Uchiyama, R., (1956), “Invariant Theoretical Interpretation of Interaction,” Phys. Rev., 101, 1597–1607.Google Scholar
Urabe, T. and Jonas, J. J., (1994), “Modeling Texture Change during the Recrystallization of an IF Steel,” ISIJ Int., 34, 435–442.CrossRefGoogle Scholar
Uyeda, T. Q. P., Abramson, P. D., and Spaudich, J., (1996), “The Neck Region of the Myosin Motor Domain Acts as a Lever Arm to Generate Movements,” Proc. Natl. Acad. Sci. USA, 93, 4459–4464.CrossRefGoogle Scholar
Valiev, R., (2007), “The New Trends in Fabrication of Bulk Nanostructured Materials by SPD Processing,” J. Maters. Sci., 42, 1483–1490CrossRefGoogle Scholar
Van Swygenhoven, H., Derlet, P. M., and Hasnaoui, A., (2002), “Atomic Mechanism for Dislocation Emission from Nanosized Grain Boundaries,” Phys. Rev. B., 66, 024101.CrossRefGoogle Scholar
Vitek, V., (1976a), “Computer Simulation of the Screw Dislocation Motion in BCC Metals under the Effect of the External Shear and Uniaxial Stresses,” Proc. R. Soc. London A, 352, 109–124.Google Scholar
Vitek, V., (1976b), “Yielding on Inclined Planes at the Tip of a Crack Loaded in Uniform Tension,” J. Mech. Phys. Solids, 24, 263–275.CrossRefGoogle Scholar
Vitek, V., Mroveca, M., and Bassani, J. L., (2004), “Influence of Non-glide Stresses on Plastic Flow: From Atomistic to Continuum Modeling,” Maters. Sci. Eng.: A, 365, 31–37.CrossRefGoogle Scholar
Vitek, V., Perrin, R. C., and Bowen, D. K., (1970), “The Core Structure of Screw Dislocations in B.C.C. Crystals,” Philos. Mag., 21, 1049–1073.CrossRefGoogle Scholar
Vohringer, O., (1989), “Deformation Behavior of Metallic Materials,” in International Summer School on Dynamic Behavior of Materials (ed. Chiem, C. Y.), pp. 7–50, Elsevier.Google Scholar
Volterra, V., (1907), “Sur l’equilibre des Corps Elastiques Multiplement Connexes,” Annales. Scientifiques de Ecole Normale. Superieure, Ser., 3, 401–517.Google Scholar
Wadworth, N. J. and Hutchings, J., (1958), “The Effect of Atmospheric Corrosion on Metal Fatigue,” Phil. Mag., 3, 1154–1166.CrossRefGoogle Scholar
Wagoner, R. H. and Chenot, J.-L., (2001), Metal Forming Analysis, Cambridge University. Press.CrossRefGoogle Scholar
Walgraef, D. and Aifantis, E. C., (1985), “Dislocation Patterning in Fatigued Metals as a Result of Dynamical Instabilities,” J. Appl. Phys., 58, 688–691.CrossRefGoogle Scholar
Wang, L., Yang, L., Dong, X., and Jiang, X., (2019), “Dynamic Constitutive Distortional Law of Materials – Micro Mechanism based on Dislocation Dynamics,” in Dynamics of Materials: Experiments, Models and Applications, pp. 221–271, Academic Press.CrossRefGoogle Scholar
Watanabe, J., (1971), “Fatigue Process of Metals,” in Teniron (Theory of Dislocation), (ed. Japan Inst. Metals), Maruzen.Google Scholar
Watts, D. J., (1999), Small Worlds, The Dynamics of Networks between Order and Randomness, Princeton University Press.CrossRefGoogle Scholar
Watts, D. J. and Strogatz, S. H., (1998), “Collective Dynamics of “Small-World” Networks,” Nature, 393, 440–442.CrossRefGoogle ScholarPubMed
Weetman, J. and Weetman, J. R., (1965), Physical Metallurgy, (ed. Cahn, R. W.), p. 793, North Holland.Google Scholar
Weinberg, S., (1995), The Quantum Theory of Fields, Vol.I, Foundations, Cambridge University Press.CrossRefGoogle Scholar
Weinberg, S., (1999), The Quantum Theory of Fields, Vol.II: Modern Applications, Cambridge University Press.Google Scholar
Weiss, B. and Maurer, K. L., (1968), “Elektronenmikroskopisch Untersuchungen an Ultraschall wechselbeanspruchten Kupferproben,” Metall, H., 9, 915–925.Google Scholar
Wilkins, M. A. and Smith, G. C., (1970), “Dislocation Structures Near a Propagating Fatigue Crack in an Al 12%mg Alloy,” Acta Metall., 18, 1035–1043.CrossRefGoogle Scholar
Willis, J. R., (1970), “Stress Field Produced by Dislocations in Anisotropic Media,” Phil. Mag, 21, 931–949.CrossRefGoogle Scholar
Winther, G., (2008), “Slip Systems Extracted from Lattice Rotations and Dislocation Structures,” Acta Materialia, 56, 1919–1932.CrossRefGoogle Scholar
Winther, G., Hong, C., and Huang, X., (2015), “Low-Energy Dislocation Structure (LEDS) Character of Dislocation Boundaries Aligned with Slip Planes in Rolled Aluminium,” Phil. Mag., 95, 1471–1489.CrossRefGoogle Scholar
Wu, T. Y., Bassani, J. L., and Laird, C., (1991), “Latent Hardening in Single Crystals I. Theory and Experiments,” Proc. Roy. Soc. London, A, 435, 1–19.Google Scholar
Xie, Z., (1994), “Arnold Diffusion and Oscillatory Solutions in the Planar Three-Body Problem,” J. Diff. Eq., 110, 289–321.CrossRefGoogle Scholar
Yamada, M., Hasebe, T., Tomita, Y., and Onizawa, T., (2008), “Dislocation Dynamics Simulation on Stability of High Dense Dislocation Structure Interacting with Coarsening Defects,” Interaction and Multiscale Mechanics, 1, 437–448.CrossRefGoogle Scholar
Yamaguchi, K., (1928), Scientific Papers of Institute of Physico-Chemical Research, vol. 8, p. 289, L.P.C.R.Google Scholar
Yanagida, T., Arata, T., and Oosawa, F., (1999), “Sliding Distance of Actin Filament Induced by a Myosin Cross-Bridge during one ATP Hydrosis Cycle,” Nature, 316, 366–369.CrossRefGoogle Scholar
Yanagida, T., Nakase, M., Nishiyama, K., and Oosawa, F., (1984), “Direct Observation of Motion of Single F-actin Filaments in the Presence of Myosin,” Nature, 307, 58–60.CrossRefGoogle ScholarPubMed
Yang, C. N. and Mills, R. L., (1954), “Conservation of Isotopic Spine and Isotopic Gauge Invariance,” Phys. Rev., 96, 191–195.CrossRefGoogle Scholar
Yang, W. and Lee, W. B., (1993), Mesoplasticity and Its Applications, Springer-Verlag.CrossRefGoogle ScholarPubMed
Yodzis, P., (1988), “The Indeterminacy of Ecological Interactions, as Perceived through Perturbation Experiments,” Ecology, 69, 508–515.CrossRefGoogle Scholar
Yokobori, T., (1968), An Interdisciplinary Approach to Fracture and Strength of Solids, Walter Nordhoff.Google Scholar
Yokobori, T. and Ichikawa, M., (1967), Rep. Res. Inst. Str. & Fracture of Materials, vol. 3, 1, Tohoku University.Google Scholar
Yokoi, M., Kirimura, T., Hasebe, T., and Imaida, Y., (1995), “Experimental Study on Deep Drawing of Aluminum Foil by Using Closed Type Hydro Spark Forming Method,” J. Soc. Mat. Sci., Japan, 44, 602–607.CrossRefGoogle Scholar
Yokoi, T., Takahshi, M., Maruyama, N., and Sugiyama, M., (2001), “Cyclic Stress Response and Fatigue Behavior of Cu Added Ferritic Steels,” J. Maters. Sci., 36, 5757–5765.CrossRefGoogle Scholar
Yokoi, T., Takahashi, M., Maruyama, N., and Sugiyama, M., (2004), “Application of Controlled Cu Nano-precipitation for Improvement in Fatigue Properties of Steels,” Nippon Steel Tech. Rep., 381, 45–50 (in Japanese).Google Scholar
Yoshida, F., Uemori, T., and Fujiwara, K., (2002), “Elastic-plastic Behavior of Steel Sheets under In-plane Cyclic Tension-Compression at Large Strain,” Int. J. Plasticity, 18, 633–659.CrossRefGoogle Scholar
Zaiser, M., Grasset, F. M., Koutsos, V., and Aifantis, E. C., (2004), “Self-Affine Surface Morphology of Plastically Deformed Metals,” Phys. Rev. Letts., 93, 1–4.CrossRefGoogle ScholarPubMed
Zbib, H. M. and Aifantis, E. C., (1988), “On the Localization and Postlocalization Behavior of Plastic Deformation. I: On the Initiation of Shear Bands, II. On the Evolution and Thickness of Shear Bands, III. On the Structure and Velocity of Portvin-Le Chatelier Bands,” Res. Mech., 23, 261–277, 279–292, 293–305.Google Scholar
Zbib, H. M., Rhee, M., and Hirth, J. P., (1998), “On Plastic Deformation and the Dynamics of 3D Dislocations”, Int. J. Mech. Sci., 40, 113–127.CrossRefGoogle Scholar
Zhao, Z., Ramesh, M., Raabe, D., Cuitiño, A. M., and Radovitzky, R., (2008), “Investigation of Three-Dimensional Aspects of Grain-Scale Plastic Surface Deformation of an Aluminum Oligocrystal,” IJP, 24, 2278–2297.Google Scholar
Zukas, J. A., Nicholas, T., Swift, H. F., Greszczuk, L. B., and Curran, D. R., (1982), Impact Dynamics, John Wiley & Sons.Google Scholar