Skip to main content Accessibility help
×
Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-25T18:57:33.602Z Has data issue: false hasContentIssue false

5 - Passive plasmonic waveguide-based devices

Published online by Cambridge University Press:  05 March 2014

Er-Ping Li
Affiliation:
A*STAR Institute of High Performance Computing, Singapore
Hong-Son Chu
Affiliation:
A*STAR Institute of High Performance Computing, Singapore
Get access

Summary

This chapter presents the hybrid plasmonic waveguide (HPW) platform and its components. In particular, the effective mode index, propagation distance, and mode confinement of the planar vertical hybrid plasmonic waveguides (VHPWs) are numerically characterized as functions of dimensions and materials in the near-infrared wavelengths. The chapter demonstrates that the vertical hybrid silver–silica–silicon plasmonic waveguide achieves better propagation characteristics than those of the counterpart silver–silica–silver MIM and silicon-based dielectric-loaded plasmonic waveguide. Moreover, we propose and design various passive waveguide-based components based on the optimized VHPW, including bends, power-splitters, couplers, and ring resonator filters. An important issue is how to implement these HPW-based components and devices in standard complementary metal–oxide–semiconductor (CMOS) electronic–photonic integrated circuits. To meet this requirement, two CMOS-compatible HPW platforms, namely a copper-cap VHPW and a hybrid horizontal copper–silicon dioxide–siliconsilicon dioxide–copper plasmonic waveguide, and devices based on them such as bends and ring resonator filters are subjected to further investigation both in experiments and in theory in the subsequent sections.

Introduction

In the context of communications and information processing, integration of photonic and nanoelectronic devices on the same chip would lead to a tremendous synergy by combining the ultra-compactness of nanoelectronics with the super-wide bandwidth of photonics. Such integration will benefit considerably from the application of nanotechnology for data-processing, sensing, medical, health-care, and energy purposes. In recent years, it has been demonstrated theoretically and experimentally that plasmonic devices, taking advantage of plasmon-enabled tight modal confinement, promise to overcome the size mismatch between microscale photonics and nanoscale electronics.

Type
Chapter
Information
Publisher: Cambridge University Press
Print publication year: 2014

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] W. L., Barnes, A., Dereux, and T. W., Ebbesen, “Surface plasmon subwavelength optics,” Nature, vol. 424, pp. 824–830, 2003.Google Scholar
[2] R., Zia, J. A., Schuller, A., Chandran, and M. L., Brongersma, “Plasmonics: The next chip-scale technology,” Material Today, vol. 9, pp. 20–27, 2006.Google Scholar
[3] E., Ozbay, “Plasmonics: Merging photonics and electronics at nanoscale dimensions,” Science, vol. 311, pp. 189–193, 2006.Google Scholar
[4] T. W., Ebbesen, C., Genet, and S. I., Bozhevolnyi, “Surface-plasmon circuitry,” Phys. Today, vol. 61, pp. 44–50, 2008.Google Scholar
[5] D. K., Gramotnev and S. I., Bozhevolnyi, “Plasmonics beyond the diffraction limit,” Nature Photonics, vol. 4, pp. 83–91, 2010.Google Scholar
[6] S. A., Maier, P. G., Kik, H. A., Atwateret al., “Local detection of electromagnetic energy transport below the difraction limit in metal nanoparticle plasmon waveguides,” Nature Mater., vol. 2, pp. 229–232, 2003.Google Scholar
[7] A., Boltasseva, T., Sondergaard, T., Nikolajsenet al., “Propagation of long-range surface plasmon polaritons in photonic crystals,” J. Opt. Soc. Am. B, vol. 22, pp. 2027–2038, 2005.Google Scholar
[8] H. S., Chu, W. B., Ewe, E. P., Li, and R., Vahldieck, “Analysis of sub-wavelength light propagation through long double-chain nanowires with funnel feeding,” Opt. Express, vol. 15, 4216–1223, 2007.Google Scholar
[9] H. S., Chu, W. B., Ewe, W. S., Koh, and E. P., Li, “Remarkable influence of the number of nanowires on plasmonic behaviors of the coupled metallic nanowire chain,” Appl. Phys. Lett., vol. 92, pp. 103103–103105, 2008.Google Scholar
[10] A., Alu, P. A., Belov, and N., Engheta, “Coupling and guided propagation along parallel chains of plasmonic nanoparticles,” New J. Phys., vol. 13, pp. 033026–033048, 2011.Google Scholar
[11] J., Takahara, S., Yamagishi, H., Taki, A., Morimoto, and T., Kobayashi, “Guiding of a one-dimensional optical beam with nanometer diameter,” Opt. Lett., vol. 22, pp. 475–477, 1997.Google Scholar
[12] J. C., Weeber, A., Dereux, C., Girad, J. R., Krenn, and J. P., Goudonnet, “Plasmon polaritons of metallic nanowires for controlling submicron propagation of light,” Phys. Rev. B, vol. 60, pp. 9061–9068, 1999.Google Scholar
[13] S. I., Bozhevolnyi, V. S., Volkov, E., Devaux, J.-Y., Laluet, and T. W, Ebbesen, “Channel plasmon subwavelength waveguide components including interferometers and ring resonators,” Nature, vol. 440, pp. 508–511, 2006.Google Scholar
[14] E. N., Economou, “Surface plasmons in thin films,” Phys. Rev., vol. 182, pp. 539–554, 1969.Google Scholar
[15] L., Liu, Z., Han, and S., He, “Novel surface plasmon waveguide for high integration,” Opt. Express, vol. 13, pp. 6645–6650, 2005.Google Scholar
[16] J. A., Dionne, L. A., Sweatlock, H. A., Atwater, and A., PolmanPlanar metal plasmon waveguides: Frequency-dependent dispersion, propagation, localization, and loss beyond the free electron model,” Phys. Rev. B, vol. 72, pp. 075405–075415, 2005.Google Scholar
[17] N. N., Feng, M. L., Brongersma, and L. D., Negro, “Metal dielectric slot waveguide structures for the propagation of surface plasmon polaritons at 1. 55 μm,” IEEE J. Quant. Electron., vol. 43, pp. 479–485, 2007.Google Scholar
[18] B., Steinberger, A., Hohenau, H., Ditlbacheret al., “Dielectric strips on gold as surface plasmon waveguides,” Appl. Phys. Lett., vol. 88, pp. 094104–094106, 2006.Google Scholar
[19] T., Holmgaard and S. I., Bozhevolnyi, “Theoretical analysis of dielectric-loaded surface plasmon-polariton waveguides,” Phys. Rev. B, vol. 75, pp. 245405–245416, 2007.Google Scholar
[20] A. V., Krasavin and A. V., Zayats, “Three-dimensional numerical modeling of photonic integration with dielectric-loaded SPP waveguides,” Phys. Rev. B, vol. 78, pp. 045425045432, 2008.Google Scholar
[21] H. S., Chu, W. B., Ewe, and E. P., Li, “Tunable propagation of light through a coupled-bent dielectric-loaded plasmonic waveguides,” J. Appl. Phys., vol. 106, pp. 106101–106103, 2009.Google Scholar
[22] P., Berini, “Long-range surface plasmon polaritons,” Adv. Opt. Photonics, vol. 1, pp. 484–588, 2009.Google Scholar
[23] R. F., Oulton, V. J., Sorger, D. A., Genov, D. F. P., Pile, and X., Zhang, “A hybrid plasmonic waveguide for subwavelength confinement and long-range propagation,” Nature Photonics, vol. 2, pp. 496–500, 2008.Google Scholar
[24] H. S., Chu, E. P., Li, P., Bai, and R., Hegde, “Optical performance of single-mode hybrid dielectric-loaded plasmonic waveguide-based components,” Appl. Phys. Lett., vol. 96, pp. 221103–221105, 2010.Google Scholar
[25] M. Z., Alam, J., Meier, J. S., Aitchison, and M., Mojahedi, “Propagation characteristics of hybrid modes supported by metal-low–high index waveguides and bends,” Opt. Express, vol. 18, pp. 12971–12979, 2010.Google Scholar
[26] J., Tian, Z., Ma, Q., Liet al., “Nanowaveguides and couplers based on hybrid plasmonic modes,” Appl. Phys. Lett., vol. 97, pp. 231121–231123, 2010.Google Scholar
[27] F., Lou, Z., Wang, D., Dai, L., Thylen, and L., Wosinski, “Experimental demonstration of ultracompact directional couplers based on silicon hybrid plasmonic waveguides,” Appl. Phys. Lett, vol. 100, pp. 241105–241108, 2012.Google Scholar
[28] V. J., Sorger, Z., Ye, R. F., Oultonet al., “Experimental demonstration of low-loss optical waveguiding at deep sub-wavelength scales,” Nature Comm., vol. 2, pp. 1–5, 2011.Google Scholar
[29] M., Wu, Z., Han, and V., Van, “Conductor-gap-silicon plasmonic waveguides and passive components at subwavelength scale,” Opt. Express, vol. 18, pp. 11728–11736, 2010.Google Scholar
[30] S., Zhu, G. Q., Lo, and D. L., Kwong, “Experimental demonstration of vertical Cu–SiO2–Si hybrid plasmonic waveguide components on an SOI platform,” IEEE Photonics Technol. Lett, vol. 24, pp. 1224–1226, 2012.Google Scholar
[31] S., Zhu, T. Y., Liow, G. Q., Lo, and D. L., Kwong, “Fully complementary metal-oxide–semiconductor compatible nanoplasmonic slot waveguides for silicon electronic photonic integrated circuits,” Appl. Phys. Lett., vol. 98, pp. 021107–021109, 2011.Google Scholar
[32] S. Y., Zhu, T. Y., Liow, G. Q., Lo, and D. L., Kwong, “Silicon-based horizontal nanoplasmonic slot waveguides for on-chip integration,” Opt. Express, vol. 19, pp. 8888–8902, 2011.Google Scholar
[33] J. T., Kim, “CMOS-compatible hybrid plasmonic slot waveguide for on-chip photonic circuits,” IEEE Photonics Technol. Lett., vol. 23, pp. 1481–1483, 2011.Google Scholar
[34] R. F., Oulton, V. J., Sorger, T., Zentgrafet al., “Plasmon lasers at deep subwavelength scale,” Nature, vol. 461, pp. 629–632, 2009.Google Scholar
[35] R. M., Ma, R. F., Oulton, V. J., Sorger, G., Bartal, and X., Zhang, “Room-temperature sub-diffraction-limited plasmon laser by total internal reflection,” Nature Mater., vol. 10, pp. 110–113, 2011.Google Scholar
[36] P. B., Johnson and R. W., Christy, “Optical constants of the noble metals,” Phys. Rev. B, vol. 6, pp. 4370–4379, 1972.Google Scholar
[37] Z., Zhu and T. G., Brown, “Full-vectorial finite-difference analysis of microstructured optical fibers,” Opt. Express, vol. 10, pp. 853–864, 2002.Google Scholar
[38] V. R., Almeida, Q., Xu, C. A., Barrios, and M., Lipson, “Guiding and confining light in void nanostructure,” Opt. Lett., vol. 29, pp. 1209–1211, 2004.Google Scholar
[39] C., Manolatou, S. G., Johnson, S., Fanet al., “High-density integrated optics,” J. Lightwave Technol., vol. 17, pp. 1682–1692, 1999.Google Scholar
[40] A., Taflove and S. C., Hagness, Computational Electrodynamics: The Finite-Difference Time-Domain Method, 3rd ed. Boston, MA: Artech House, 2005.
[41] A., Kumar and S., Aditya, “Performance of S bends in integrated optic waveguides,” Microwave Opt. Technol. Lett., vol. 19, pp. 289–292, 1998.Google Scholar
[42] H. S., Chu, P., Bai, E. P., Li, and W. R. J., Hoefer, “Hybrid dielectric-loaded plasmonic waveguide-based power splitter and ring resonator: Compact size and high optical performance for nanophotonic circuits,” Plasmonics, vol. 6, pp. 591–597, 2011.Google Scholar
[43] T., Holmgaard, Z., Chen, S. I., Bozhevolnyi, L., Markey, and A., Dereux, “Dielectric-loaded plasmonic waveguide-ring resonators,” Opt. Express, vol. 17, pp. 2968–2975, 2009.Google Scholar
[44] V. S., Volkov, S. I., Bozhevolnyi, E., Devaux, J.-Y., Laluet, and T. W, Ebbesen, “Wavelength selective nanophotonic components utilizing channel plasmon polaritons,” Nano Lett., vol. 7, pp. 880–884, 2007.Google Scholar
[45] Q., Xu, B., Schmidt, S., Pradhan, and M., Lipson, “Micrometre-scale silicon electro-optic modulator,” Nature, vol. 435, pp. 325–327, 2005.Google Scholar
[46] W., Bogaerts, P., De Heyn, T., Van Vaerenberghet al., “Silicon microring resonators,” Laser Photon. Rev., vol. 6, pp. 47–73, 2012.Google Scholar
[47] A., Yariv, “Universal relations for coupling of optical power between microresonators and dielectric waveguides,” Electron. Lett., vol. 36, pp. 321–322, 2000.Google Scholar
[48] S., Roberts, “Optical properties of copper,” Phys. Rev., vol. 118, pp. 1509–1518, 1960.Google Scholar
[49] D. W., Lynch and W. R., Hunter, “An introduction to the data for several metals”, in Handbook of Optical Constants of Solids II, E. D., Palik, Ed. San Diego, CA: Academic, 1991, pp. 341–419.
[50] http://www.sopra-sa com.
[51] I., Goykhman, B., Desiatov, and B., Levy, “Experimental demonstration of locally oxidized hybrid silicon-plasmonic waveguide,” Appl. Phys. Lett., vol. 97, pp. 141106–141108, 2010.Google Scholar
[52] J. W., Peng, S. J., Lee, G. C. A., Lianget al., “Improved carrier injection in gate-all-around Schottky barrier siliconnanowire field-effect transistors,” Appl. Phys. Lett., vol. 93, pp. 073503–073505, 2008.Google Scholar
[53] S. Y., Zhu, G. Q., Lo, and D. L., Kwong, “Performance of ultracompact copper-capped silicon hybrid plasmonic waveguide-ring resonators at telecom wavelengths,” Opt. Express, vol. 20, pp. 15232–15246, 2012.Google Scholar
[54] S. Y., Zhu, Q., Fang, M. B., Yu, G. Q., Lo, and D. L., Kwong, “Propagation losses in undoped and n-doped polycrystalline silicon wire waveguides,” Opt. Express, vol. 17, pp. 20891–20899, 2009.Google Scholar
[55] S. Y., Zhu, G. Q., Lo, and D. L., Kwong, “Low-loss amorphous silicon wire waveguide for integrated photonics: Effect of fabrication process and the thermal stability,” Opt. Express, vol. 18, pp. 25283–25291, 2010.Google Scholar
[56] L., Chen, J., Shakya, and M., Lipson, “Subwavelength confinement in integrated metal slot waveguide on silicon,” Opt. Lett., vol. 31, pp. 2133–2135, 2006.Google Scholar
[57] Z., Han, A. Y., Elezzabi, and V., Van, “Experimental realization of subwavelength plasmonic slot waveguides on a silicon platform,” Opt. Lett., vol. 35, pp. 502–504, 2010.Google Scholar
[58] P. B., Johnson and R. W., Christy, “Optical constants of the noble metals,” Phys. Rev. B, vol. 6, pp. 4370–4379, 1972.Google Scholar
[59] A. D., Rakic, A. B., Djuriic, J. M., Elazar, and M. L., Majewski, “Optical properties of metallic films for vertical-cavity optoelectronic devices,” Appl. Opt., vol. 37, pp. 5271–5283, 1998.Google Scholar
[60] Z., Han, V., Van, W. N., Herman, and P.-T., Ho, “Aperture-coupled MIM plasmonic ring resonators with sub-diffraction modal volumes,” Opt. Express, vol. 17, pp. 12678–12684, 2009.

Save book to Kindle

To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×