A new combustor concept referred as the trapped vortex combustor (TVC) employs a vortex that is trapped inside a cavity to stabilise the flame. The cavity is formed between two axisymmetric disks mounted in tandem. TVC offers many advantages when compared to conventional swirl stabilisers. In the present work, numerical investigation of cold flow (non-reacting) through trapped vortex combustor is performed. The numerical simulation involves passive flow through TVC to obtain an optimum cavity size to trap stable vortices inside the cavity and to observe the important characteristics of TVC. One of the main objectives is to evaluate various two equation turbulence models for the aerodynamic predictions of TVC. Commercial CFD software Fluent is used for the present study. In addition to many models available, Non-linear k-ω and modified k-ω models are incorporated through user defined functions. Results obtained include streamlines, residence time and entrainments for all models. The reattachment length obtained by non-linear k-ω model closely matches with that obtained by DNS in the case of forebody-spindle alone. Non-linear k-ω model alone captures the corner vortices while all the other models failed to capture. From the entrainment characteristics study, it is inferred that the primary air needs to be injected for accommodating the decrease in oxidizer inside the cavity to obtain better performance from the TVC.

An experimental investigation was conducted to determine the flow characteristics of shallow swept cavities at a free-stream Mach number of 2. The investigation described herein focused on obtaining information on both time-averaged and time-dependent flow features. The data consisted of steady and unsteady pressure measurements as well as some surface oil and schlieren flow visualisation. The effective length-to-depth ratios l/d of cavities investigated ranged between 5·65 and 8 for shallow ‘open’ cavities and between 11·31 and 16 for ‘closed’ cavities. The cavity sweep angles were 0°, 15° and 45°. The results of the swept cavities, when compared to the datum cases of the straight (0°) cavities, showed some distinct differences. With regard to time-averaged flow characteristics, in an open swept cavity (5·65 < l/d < 8), the flow displayed quasi-open flow behaviour, distorted by the spanwise cross flow within the cavity. In the case of the closed swept cavity (11·31 < l/d < 16), flow features resembling the ‘closed’ to ‘transitional closed’ cavity flow types were seen to exist simultaneously across the span. Unsteady pressure data indicated that for an open cavity at 15° sweep angle, the discrete frequencies observed were similar to those of a straight open cavity. In contrast to this, at 45° sweep angle, the frequencies were broadband with no discrete frequency across the cavity length. For the closed cavity, the frequencies were all broadband irrespective of the sweep angle. The investigation also showed that the influence of the sweep angle on the pressure drag of the cavity strongly depends on the type of cavity flow: a sweep angle increase from 0° to 45° approximately doubled the pressure drag for an open cavity, while it led to a drag reduction of about 37% for the closed cavity.

A spike attached to a hemispherical body drastically changes its flowfield and influences aerodynamic drag in a hypersonic flow. It is, therefore, a potential candidate for drag reduction of a future high-speed vehicle. The effect of the spike length, shape, spike nose configuration and angle-of-attack on the reduction of the drag is experimentally studied with use of hypersonic wind-tunnel at Mach 6. The effects of geometrical parameters of the spike and angle-of-attack on the aerodynamic coefficient are analysed using schlieren picture and measuring aerodynamic forces. These experiments show that the aerodisk is superior to the aerospike. The aerodisk of appropriate length, diameter and nose configuration may have the capability for the drag reduction. The inclusion of an aero disk at the leading edge of the spike has an advantage for the drag reduction mechanism if it is at an angle-of-attack, however consideration to be given for increased moment resulting from the spike is required.

The development of commodity flight simulation, in the form of PC game technology, continues to advance at a rapid pace. Indeed, the software industry is now being driven primarily by the requirements of gaming, digital media, and other entertainment applications. This has largely been due to the commoditisation of computer hardware, which is apparent when considering recent trends in central processing unit and graphics processor development.

The flight simulation industry has benefited from this trend of hardware commoditisation, and will continue to do so for the foreseeable future. It is, however, yet to fully realise the potential for leveraging commodity-off-the-shelf (COTS) software. In this paper the opportunities presenting themselves for the next 25 years of flight simulation are discussed, as the aviation and games software industry’s requirements converge. A SWOT (strengths-weaknesses-opportunities-threats) analysis of the commodity flight simulation software industry is presented, including flight modelling, scenery generation, multiplayer technology, artificial intelligence, mission planning, and event handling. Issues such as data portability, economics, licensing, intellectual-property, interoperability, developer extensibility, robustness, qualification, and maintainability are addressed.

Microsoft Flight Simulator is used as a case study of how commodity flight simulation has been extended to include extensive programmatic access to its core engine. Examples are given on how the base platform of this application can be extended by third-party developers and the power this extensibility model provides to the industry.

This paper is presented to highlight particular technology trends in the commodity flight simulation industry, the fidelity that commodity flight simulations can provide, and to provide a high-level overview of the strengths and weaknesses thereof.

Unsteady aerodynamic loads on aircraft configurations are used for aeroelastic or flight dynamic analyses. The sources for deriving these loads include strip theory aerodynamics and three-dimensional panel methods. In some applications the behaviour of the unsteady air loads as the frequency approaches zero is important, and it is well known that the behaviour of strip theory aerodynamics employing the exact circulation function differs qualitatively from that of the three-dimensional panel methods such as the subsonic doublet lattice method (DLM). Theoretical results from an earlier study of the low frequency behaviour of the DLM are used here to show the relationship between the DLM and strip theory and the relationship is verified by a numerical example.

This paper describes a method by which, without the use of external personnel or equipment, take-off and landing distances of an aeroplane may be estimated. An error analysis for the method, allowing determination of outcome accuracy, is also shown. The method is validated through use of flight test results from two certification programmes: one on a light aeroplane, and one on a microlight aeroplane.