Sustainability is becoming a major strategic driver within the aviation industry, which has moved from providing primarily economic benefits to delivering the ‘triple bottom line’, including social and environmental impact as well as financial performance. Sustainable aviation is also being tracked by the International Civil Aviation Organisation (ICAO) Global Collation for Sustainable Aviation. Operations and Infrastructure is an important near-term opportunity to deliver sustainability benefits. Digital Technologies, Integrated Vehicle Health Management (IVHM) and Maintenance Repair and Overhaul (MRO) play a prominent role in implementing these benefits, with a particular focus on operational efficiencies. As part of this, the sustainable smart hangar of the future is a concept that is becoming more and more important in forming the future of the aviation industry. The Hangar of the Future is an excellent opportunity for innovation, combining the progress in manufacturing, materials, robotics and artificial intelligence technologies. Succeeding in developing a hangar with these characteristics will provide us with potential benefits ranging from reduced downtime and costs to improved safety and environmental impact. This work explores some of the key features related to the sustainable smart hangar of the future by discussing research that takes place in DARTeC’s (Digital Aviation Research and Technology Centre) hangar led by the IVHM Centre in Cranfield. Additionally, the paper touches on some longer-term aspirations.

Abrupt changes in aircraft attitude due to encountering terrain turbulence or wind shear at low altitudes can directly lead to serious accidents. Therefore, a highly responsive and reliable active attitude stabiliser on board is necessary to counteract low-level severe atmospheric disturbances. However, gust environments caused by local terrain and structures are difficult to represent with typical models, such as the Dryden continuous gust model in free space. As a result, an optimal model-based control design cannot be applied. To address this problem, this paper introduces an adaptive mechanism for updating motion equations based on atmospheric conditions using in-flight surface pressure-field sensing. Additionally, a dynamic wind tunnel experiment system, which can be constructed at universities at a low cost, is developed and described in detail. The effectiveness of the proposed scheme is evaluated through wind tunnel experiments and numerical simulations using a large number of gust samples.

For a class of uncertain systems, a non-overshooting sliding mode control is presented to make them globally exponentially stable and without overshoot. Even when the unknown stochastic disturbance exists, and the time-variant reference trajectory is required, the strict non-overshooting stabilisation is still achieved. The control law design is based on a desired second-order sliding mode (2-sliding mode), which successively includes two bounded-gain subsystems. Non-overshooting stability requires that the system gains depend on the initial values of system variables. In order to obtain the global non-overshooting stability, the first subsystem with non-overshooting reachability compresses the initial values of the second subsystem to a given bounded range. By partitioning these initial values, the bounded system gains are determined to satisfy the robust non-overshooting stability. In order to reject the chattering in the controller output, a tanh-function-based sliding mode is developed for the design of smoothed non-overshooting controller. The proposed method is applied to a UAV trajectory tracking when the disturbances and uncertainties exist. The control laws are designed to implement the non-overshooting stabilisation in position and attitude. Finally, the effectiveness of the proposed method is demonstrated by the flying tests.

To enhance the impact resistance capacity and ensure the floatability of aircraft after ditching, the slamming response of three types of aircraft sub-floor structures are investigated including the flat, cylindrical and ellipsoidal under floor. A coupled Finite Element-Smooth Particle Hydrodynamic (FE-SPH) method is employed with focus on non-linear structural collapse in fluid-structure interaction. The material is defined by bilinear elastic plastic law, and the strain rate effect is taken into account. Further, comparison and analyses are performed in terms of acceleration, local pressure and strains at different speeds. Results show that conventional flat sub floor structures perform poorly during ditching due to excessive peak acceleration and pressure. By contrast, the peak acceleration of ellipsoidal under floor is lower at all measured speeds and the pressure on the sides is reduced. Moreover, the ellipsoidal sub-floor with bi-directional curvature generates smaller plastic strain and deflection of skin, demonstrating better mechanical properties in water impact scenarios.

Gas turbine engine starting models require a lot of calibration to represent reality with acceptable accuracy due to the lack of high-quality component rig data in the sub-idle region. A detailed sensitivity study is presented in this paper to guide such calibration efforts. A thermodynamic component-matching type transient model of a single-spool turbojet engine with shaft and heat-soakage dynamics is employed for this purpose. Turbomachinery component maps are extended to sub-idle using an in-house map smoothing tool and the strategies presented by Kurzke recently. These extension strategies make use of the correlations hidden in the already available regions of the maps and ensure physical consistency. However, they contain some uncertainty, even when an experimentally obtained zero-speed line is available. Combustor sub-idle efficiency, stability limits, and delay are taken from the literature. Due to the chaotic nature of a combustor in the sub-idle region, a precise prediction of the combustor efficiency seems impossible. Effects of uncertainties related to sub-idle turbomachinery map extensions, burner efficiency, and heat soakage are investigated in this paper. Two popular fuel control strategies are employed and compared to see how controls deal with these uncertainties. It is concluded that turbomachinery torque characteristics and turbine capacities are the most important parameters when calibrating a starting model with a control based on rotational acceleration while burner efficiency and heat soakage are added on top of these with a control based on fuel flow rate.

The purpose of this study was to explore the electroencephalogram (EEG) features sensitive to situation awareness (SA) and then classify SA levels. Forty-eight participants were recruited to complete an SA standard test based on the multi-attribute task battery (MATB) II, and the corresponding EEG data and situation awareness global assessment technology (SAGAT) scores were recorded. The population with the top 25% of SAGAT scores was selected as the high-SA level (HSL) group, and the bottom 25% was the low-SA level (LSL) group. The results showed that (1) for the relative power of $\beta$1 (16–20Hz), $\beta$2 (20–24Hz) and $\beta$3 (24–30Hz), repeated measures analysis of variance (ANOVA) in three brain regions (Central Central-Parietal, and Parietal) × three brain lateralities (left, midline, and right) × two SA groups (HSL and LSL) showed a significant main effect for SA groups; post hoc comparisons revealed that compared with LSL, the above features of HSL were higher. (2) for most ratio features associated with $\beta$1 ∼ $\beta$3, ANOVA also revealed a main effect for SA groups. (3) EEG features sensitive to SA were selected to classify SA levels with small-sample data based on the general supervised machine learning classifiers. Five-fold cross-validation results showed that among the models with easy interpretability, logistic regression (LR) and decision tree (DT) presented the highest accuracy (both 92%), while among the models with hard interpretability, the accuracy of random forest (RF) was 88.8%, followed by an artificial neural network (ANN) of 84%. The above results suggested that (1) the relative power of $\beta$1 ∼ $\beta$3 and their associated ratios were sensitive to changes in SA levels; (2) the general supervised machine learning models all exhibited good accuracy (greater than 75%); and (3) furthermore, LR and DT are recommended by combining the interpretability and accuracy of the models.

Algeria’s micro-satellite, Alsat-1b, was successfully launched into a 680 km low Earth orbit onboard a PSLV-C35 rocket from Sriharikota, South India, on September 26, 2016. The spacecraft was conceived, built and launched as part of an 18-month technology transfer programme between Algeria’s Algerian Space Agency (ASAL) and the United Kingdom’s Surrey Satellite Technology Limited (SSTL). This document details the Power Conditioning and Distribution Module’s (PCM-PDM) design and performance in orbit, critical component of a satellite electrical power system, responsible for converting, regulating and distributing power to various subsystems and payloads. The PCM-PDM developed and produced by SSTL was subjected to rigorous testing simulating harsh space conditions to assess its performance. The results of this comprehensive analysis indicate that the module can effectively withstand extreme environmental factors and function optimally in challenging settings. The analysis focused on the PCM-PDM’s ability to provide reliable and efficient power conditioning and distribution to the satellite, including its load management capabilities, overcurrent protection, protection against undervoltage and critical mode operations. The results of the performance analysis showed that the PCM-PDM met the required specifications and demonstrated reliable and efficient operation in different modes of the satellite’s mission. The study highlights the importance of careful design and rigorous testing of the PCM-PDM to ensure the reliable and efficient operation of the satellite and its payloads.

The variability in ground manoeuvre occurrences for aircraft landing gear is intrinsically linked to the airport geometries served by aircraft in-service and consequently, the cyclic loads that landing gear carry are driven by the route network and characteristics of aircraft operators. Currently, assumptions must be made when deriving fatigue load spectra for aircraft landing gear, which may fail to capture the operator characteristics, potentially leading to design conservatism. This paper presents the enhanced characterisation of ground turning manoeuvres within the Automatic Dependent Surveillance-Broadcast (ADS-B) trajectories for six narrow-body aircraft across a full-service carrier (FSC) and a low-cost carrier (LCC) fleet. The methodology presented within this paper employs ADS-B latitude and longitude information to overcome limitations of previous approaches, increasing the rate of correct manoeuvre identification within ADS-B trajectories to 77% of flights from the 50% rate achieved previously. When characterising the ground manoeuvres across 3,000 flights, significant differences in manoeuvre occurrences were observed between individual aircraft within the LCC fleet and between the FSC and LCC fleets. The occurrence of tight and pivot turns were shown to vary across the six aircraft with six and eight fatigue-critical turns being performed by the FSC and LCC fleet for every 10 flights performed. In addition, it was observed that the direction of fatigue critical turns is biased in specific directions, suggesting that individual main landing gear assemblies will accumulate fatigue damage at an increased rate, leading to greater justification for operator-specific spectra and structural health monitoring of aircraft landing gear.

Accurately evaluating the aerodynamic performance of the missile with damaged structures is very important for the subsequent flight control strategy. At present, few researchers have studied the aerodynamic characteristics of damaged supersonic cruise missiles. Based on CFD (computational fluid dynamics) solutions and the dynamic derivative identification method, the differences in static and dynamic characteristics between the damaged and undamaged models are compared. The results indicate that when the extent of damage increases, the change rate of drag coefficient at larger AoA (angle-of-attack) is greater than that at the smaller AoA. On the contrary, the change rate of lift coefficient at larger AoA is smaller than that at smaller AoA. Meanwhile, the absolute value of the static pitch moment decreases, but the absolute value of the roll moment increases. Damage causes a change in the absolute values of the pitch and roll dynamic derivatives, and the dynamic derivatives do not vary monotonically with the increase of AoA. The turning point occurs at about $\alpha$ = 5°. The areas of the hysteresis loops of the pitch-roll coupling moment increase, which makes the dynamic coupling characteristic between the pitch and roll directions increase. Finally, the maximum allowable damage extent of the missile wing that can achieve static trim is obtained and validated by controlling the deflection of the four rudders.

The usage areas of rotary or fixed wing unmanned aerial vehicles (UAV) have become very widespread with technological developments. For this reason, UAV designs differ in terms of aerodynamic design, flight performance and endurance depending on the intended use. In this study, maximising of the autonomous flight performance of the unmanned helicopter produced at Erciyes University using an optimisation algorithm is discussed. For this purpose, the input parameters of the dynamic model are chosen as blade length, blade mass density, blade chord width and blade twist angle of the unmanned helicopter and the proportional, integral, derivative gain coefficients of the lateral axis of the autopilot. The output parameters of the dynamic model are selected as settling time, rise time and maximum overshoot, which are autonomous performance parameters. The dynamic model consisting of helicopter and autopilot parameters is integrated into the back-tracking search optimisation (BSO) algorithm as an objective function. In the optimization process, where mean squared error (MSE) is used as the performance criterion, optimum input and output values were determined. Thus, helicopter and autopilot parameters, which are among the factors affecting autonomous performance, are taken into account with equal importance and simultaneously. Simulations show that the obtained values are satisfactory. With this approach based on the optimisation method, complex and time-consuming dynamic model calculations are reduced, time and cost are saved, and practicality is achieved in applications. Therefore, this approach can be an innovative and alternative method to improve UAV designs and increase flight performance compared to classical methods.

A rapid nonlinear aeroelastic framework for the analysis of the highly flexible wing with distributed propellers is presented, validated and applied to investigate the propeller effects on the wing dynamic response and aeroelastic stability. In the framework, nonlinear beam elements based on the co-rotational method are applied for the large-deformation wing structure, and an efficient cylinder coordinate generation method is proposed for attached propellers at different position. By taking advantage of the relatively slow dynamics of the high-aspect-ratio wing, propeller wake is modeled as a quasi-steady skewed vortex cylinder with no updating process to reduce the high computational cost. Axial and tangential induced velocities are derived and included in the unsteady vortex lattice method. For the numerical cases explored, results indicate that large deformation causes thrust to produce wing negative torsion which limits the displacement oscillation, and slipstream mainly increases the response values. In addition, an improvement of flutter boundary is found with the increase of propeller thrust while slipstream brings a destabilising effect as a result of the increment of dynamic pressure and local lift. The great potential of distributed propellers in gust alleviation and flutter suppression of such aircraft is pointed out and the method as well as conclusions in this paper can provide further guidance.

This paper is focused on the stability of real-time hybrid aeroelastic simulation systems for flexible wings. In a hybrid aeroelastic simulation, a coupled aeroelastic system is ‘broken down’ into an aerodynamic simulation subsystem and a structural vibration testing subsystem. The coupling between structural dynamics and aerodynamics is achieved by real-time communication between the two subsystems. Real-time hybrid aeroelastic simulations can address the limitations associated with conventional aeroelastic testing performed within a wind tunnel or with pure computational aeroelastic simulation. However, as the coupling between structural dynamics and aerodynamics is completed through the real-time actuation and sensor measurement, their delays may inherently impact the performance of hybrid simulation system and subsequently alter the measured aeroelastic stability characteristics of the flexible wings. This study aims to quantify the impact of actuation and sensor measurement delays on the measured aeroelastic stability, e.g. the flutter boundary, of flexible wings during real-time hybrid simulations, especially when different aerodynamic models are implemented.

High-temperature non-equilibrium effects are prominent in scramjet nozzle flows at high Mach numbers. Hence, the thermochemical non-equilibrium gas model incorporating the vibrational relaxation process of molecules in the hydrocarbon-air reaction is developed to numerically simulate the flow of a hydrocarbon fuel scramjet nozzle at Mach 10. Besides, the results computed by the models of the thermally perfect gas, chemically non-equilibrium gas, and thermally non-equilibrium chemically frozen gas are applied for comparative studies. Results indicate that chemical non-equilibrium effects are more significant for the flow-field structure and parameters compared to thermal non-equilibrium effects. Meanwhile, vibrational relaxation and chemical reactions interact in the flow-field. The heat released from the chemical reactions in the flow-field of the thermochemical non-equilibrium gas model makes the thermal non-equilibrium effects weaker compared to the thermally non-equilibrium chemically frozen gas model; the chemical reactions in the thermochemical non-equilibrium gas model are more intense than in the chemically non-equilibrium gas model. Due to the slow relaxation of vibrational energy, the thermal non-equilibrium models predicted nozzle thrust lower than the thermal equilibrium models by approximately 1.11% to 1.33%; when considering the chemical reactions, the chemical non-equilibrium models predicted nozzle thrust higher than the chemical frozen models by approximately 7.30% to 7.54%. Hence, the structural design and performance study of the high Mach numbers scramjet nozzle must consider thermochemical non-equilibrium effects.