The possibility of the creation and the application prospects of the laser-electron X-ray generator based on Thomson scattering of laser radiation on a bunch of relativistic electrons are considered. Such a generator fills the existing gap between X-ray tubes and synchrotron radiation sources, which is several orders of magnitude in terms of the brightness, average intensity, size, and also in the construction and running costs.

The impact of nano-structured surfaces on particle generation from ultrashort intense laser produced plasmas is presented over an intensity range of 1015–1017 Wcm−2. The nano-structured surface evidently produces hotter plasma but does not lead to the generation of hotter ions, a counterintuitive result based on present understanding of plasma expansion mechanism. Although the total ion flux and energy is more in the case of structured surfaces, the average energy of the projectiles is found to be lower than that from polished surfaces. The nano-structured surface shows preferential enhancement of lower energy ions and an intensity dependent divergence of the ejected particles.

This report addresses the physical concept and the results of mathematical modeling of cryogenic layer degrading caused by its radiation heating during direct drive target injection into the reaction chamber. Special attention is paid to the influence of a solid layer structure on the roughening of the layer surface that is of critical importance for the development of target injection scenario.

A nanosecond pulsed Nd-Yag laser, operating at an intensity of about 109 W/cm2, was employed to irradiate different metallic solid targets (Al, Cu, Ta, W, and Au) in vacuum. The measured ablation yield increases with the direct current (dc) electrical conductivity of the irradiated target. The produced plasma was characterized in terms of thermal and Coulomb interaction evaluating the ion temperature and the ion acceleration voltage developed in the non-equilibrium plasma core. The particles emission produced along the normal to the target surface was investigated measuring the neutral and the ion energy distributions and fitting the experimental data with the “Coulomb-Boltzmann-shifted” function. Results indicate that the mean energy of the distributions and the equivalent ion acceleration voltage of the non-equilibrium plasma increase with the free electron density of the irradiated element.

This paper deals with a lithium/tin combined target to increase the conversion efficiency of extreme ultraviolet (EUV) of 13.5 nm emission from laser-produced plasma. The bilayer target of glass/lithium (20 nm)/tin (50 nm) exhibits a sharp and strong emission in comparison with a Sn bulk target. The reverse coating of glass/tin/lithium was unstable and EUV could not be observed. By using nano-porous SnO2 and an electrochemical deposition of lithium, nano-structured lithium/tin composite was prepared, and was stable without deliquescence of lithium.

Inverse Compton scattering is a promising method to implement a high brightness, ultra-short, energy tunable X-ray source at accelerator facilities. We have developed an inverse Compton backscattering X-ray source driven by the multi-10 TW laser installed at Daresbury. Hard X-rays, with spectral peaks ranging from 15 to 30 keV, depending on the scattering geometry, will be generated through the interaction of laser pulses with electron bunches delivered by the energy recovery linac machine, initially known as energy recovery linac prototype and subsequently renamed accelerators and lasers in combined experiments. X-ray pulses containing 9 × 107 photons per pulse will be created from head-on collisions, with a pulse duration comparable to the incoming electron bunch length. For transverse collisions 8 × 106 photons per pulse will be generated, where the laser pulse transit time defines the X-ray pulse duration. The peak spectral brightness is predicted to be ~1021 photons/(s mm2 mrad2 0.1% Δλ/λ).

An experimental study on the angular distribution and conversion of multi-keV X-ray sources produced from 2 ns-duration 527nm laser irradiated thick-foil targets on Shenguang II laser facility (SG-II) is reported. The angular distributions measured in front of the targets can be fitted with the function of f(θ) = α+ (1−α)cosβθ (θ is the viewing angle relative to the target normal), where α = 0.41 ± 0.014, β = 0.77 ± 0.04 for Ti K-shell X-ray sources (~4.75 keV for Ti K-shell), and α = 0.085 ± 0.06, β = 0.59 ± 0.07 for Ag/Pd/Mo L-shell X-ray sources (2–2.8 keV for Mo L-shell, 2.8–3.5 keV for Pd L-shell, and 3–3.8 keV for Ag L-shell). The isotropy of the angular distribution of L-shell emission is worse than that of the K-shell emission at larger viewing angle (>70°), due to its larger optical depth (stronger self-absorption) in the cold plasma side lobe surrounding the central emission region, and in the central hot plasma region (emission region). There is no observable difference in the angular distributions of the L-shell X-ray emission among Ag, Pd, and Mo. The conversion efficiency of Ag/Pd/Mo L-shell X-ray sources is higher than that of the Ti K-shell X-ray sources, but the gain relative to the K-shell emission is not as high as that by using short pulse lasers. The conversion efficiency of the L-shell X-ray sources decreases with increasing atomic numbers (or X-ray photon energy), similar to the behavior of the K-shell X-ray source.

Survival of the production target in successive experiments (with a repetition rate of 1 Hz) over an extended period of time is one of the key problems encountered in designing the Super-FRS (Superconducting Fragment Separator) at the future Facility forAntiprotons and Ion Research (FAIR). Because of the difficulties involved in construction of a liquid jet metal target, it is highly desirable to employ a solid production target at the Super-FRS. However, with the high beam intensities that will be available at the FAIR, the production target may be destroyed in a single experiment due to high specific energy deposition by the beam in the target material. The level of specific energy deposition can be reduced to an acceptable value by increasing the beam focal spot area. However, the spot size is limited by requirements of achieving good isotope resolution and sufficient transmission of the secondary beam through the system. The resolving power of the fragment separator is inversely proportional to the X-dimension of the focal spot whereas the transmission depends on Y-dimension only. It has been previously shown [Tahir et al., 2005c] that an elliptic focal spot with appropriate dimensions, will fulfill the above two conditions simultaneously and will also have a large enough area to reduce the specific energy deposition to an acceptable level for certain beam intensities of interest. In this paper we present numerical simulations of thermodynamic and hydrodynamic behavior of a solid graphite target that is irradiated by 1 GeV/u uranium beam in the intensity range of 1010 –1011 ions per bunch with a bunch length = 50 ns. These simulations have been carried out using a three-dimensional computer code, PIC3D, that includes elastic-plastic effects. This theoretical work has shown that up to a beam intensity of 1011 ions/bunch, one can employ a solid target while for higher intensities the target will be destroyed due to thermal stresses induced by the beam. It has also been found that a circular focal spot leads to minimum thermal stresses as it generates minimum pressure gradients compared to an elliptic focal spot, for the same specific energy deposition. Moreover, the stress level increases with an increase in the ellipticity of the focal spot. It is therefore recommended that one should use a circular focal spot for lower intensities provided that the criteria for isotope resolution and transmission are fulfilled.

A microscopic eikonal theory based on photon wave mechanics is established. The diamagnetic (solid state) field-plasma interaction is shown to play a central role in the theory, and this interaction enables one to introduce a massive transverse photon concept. This quasi-particle enters the eikonal theory in manner similar to the one in which the classical point particle enters Newtonian Mechanics in the Hamilton-Jacobi formulation. When the spatial fluctuations in the stationary-state plasma density are of importance the microscopic eikonal theory becomes a spatially nonlocal theory, and the nonlocality, originating in the coupling of longitudinal and scalar photons to the massive transverse photon, extends over near-field distances.

A time-dependent solution for neutral-plasma isothermal expansions into a vacuum in a special-transformation coordinate system is obtained. In this new coordinate system, the special self-similar solutions of it were given by Huang and co-workers (Appl. Phys. Lett. 92, 031501). Combining the time-dependent solution and the quasi-linear increase of the electron density due to the hot-electron recirculation, an analytic model is proposed to reveal the influence of the hot-electron recirculation on the increase of electric field and on the acceleration of ions of different masses and charges.