Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-10T07:59:46.504Z Has data issue: false hasContentIssue false
  • English
  • Français

Corrosion and expansion of grouted Magnox

Published online by Cambridge University Press:  05 July 2018

J. Cronin  and
N. Collier
J. Cronin*
Affiliation:
National Nuclear Laboratory, Sellafield, Seascale, Cumbria CA20 1PG, UK.
N. Collier
Affiliation:
National Nuclear Laboratory, 5th Floor, Chadwick House, Warrington Road, Birchwood Park, Warrington, Cheshire WA3 6AE, UK
*
*E-mail: jim.c.cronin@nnl.co.uk
Rights & Permissions [Opens in a new window]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

With potential storage of several hundred years underground in a geological disposal facility (GDF) before closure, there is a requirement for radioactive waste packages to perform adequately. Over the past 25 years, cementitous grouts based on blast furnace slag (BFS) and ordinary Portland cement (OPC), have been used in the UK to immobilize intermediate-level waste (ILW), Magnox swarf, and currently such wasteforms are in surface storage awaiting geological disposal. Magnox fuel cladding will slowly corrode when encapsulated in alkaline cementitious grouts to produce hydrogen gas and an expansive corrosion product. Expansive corrosion products may lead to degradation of the wasteform and, if extensive, could affect the container. This study investigated the acute and chronic rates of corrosion of unirradiated Magnox swarf encapsulated in a BFS/OPC grout over a range of temperatures (25, 40, 60, 75 and 90°C) for curing times of up to 2½ years. Structural product degradation starts to develop as the tensile strength of the grout is approached by the expansive forces generated. Deformation of some experimental containers was also noted. An estimate of the time taken for a grouted product to fracture from this study due to the corrosion solely of Magnox is 350 years for storage at 25°C. Although not fully described in this paper, the main cement phases were calcium silicate hydrate, portlandite and gehlenite; the main product of Magnox corrosion was brucite. The curing temperature did not affect the compositions of the Magnox metal, corrosion product or grout.

Keywords

corrosionexpansionmagnox swarfgrout
Type
Research Article
Information
Mineralogical Magazine , Volume 76 , Issue 8 , December 2012 , pp. 2901 - 2909
Creative Commons
Creative Common License - CCCreative Common License - BY
© [2012] The Mineralogical Society of Great Britain and Ireland. This is an open access article distributed under the terms of the Creative Commons Attribution (CC BY) licence (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2012

References

Nuclear Decommissioning Authority (2010) Geological Disposal: Package Evolution Status Report. NDA Report NDA/RWMD/03.Google Scholar
Nuclear Decommissioning Authority (2011) Interim Storage of Higher Activity Waste Packages - Integrated Approach. Industry Guidance, August 2011.Google Scholar
Cronin, J. and Collier, N. (2010) Calculation of metal corrosion rates in grouted ILW packages. National Nuclear Laboratory Report No. NNL(10)11220, Issue 2.Google Scholar
Cronin, J. and Collier, N. (2011) Corrosion & Expansion of Grouted Magnox. National Nuclear Laboratory Report No. NNL(11)11524, Issue 3.Google Scholar
Hoch, A.R., Smart, N.R. and Reddy, B. (2010) A Survey of Reactive Metal Corrosion Data for Use in the SMOGG Gas Generation Model. Serco Assurance Report, SA/ENV-0895. S6Google Scholar