Tunable plasmonic resonances across the visible and near infrared spectra have provided novel ways to develop next-generation nanophotonic devices. Here, by utilizing optothermally controllable phase-changing material (PCM), we studied highly tunable charge transfer plasmon (CTP) resonance modes. To this end, we have designed a two-member dimer assembly including gold cores and Ge2Sb2Te5 (GST) shells in distant, touching, and overlapping conditions. We successfully demonstrated that toggling between amorphous (dielectric) and crystalline (conductive) phases of GST allows for achieving tunable dipolar and CTP resonances along the near-infrared spectrum. The proposed dimer structures can help forming optothermally controlled devices without further morphological variations in the geometry of the design, and having strong potential for advanced plasmon modulation and fast data routing.

The incorporation of inorganic particles in a polymer matrix has been established as a method to adjust the mechanical performance of composite materials. We report on the influence of covalent integration of magnetic nanoparticles (MNP) on the actuation behavior and mechanical performance of hybrid nanocomposite (H-NC) based shape-memory polymer actuators (SMPA). The H-NC were synthesized by reacting two types of oligo(ω-pentadecalactone) (OPDL) based precursors with terminal hydroxy groups, a three arm OPDL (3AOPDL, Mn = 6000 g mol·1-1) and an OPDL (Mn =3300 g · mol-1) coated magnetite nanoparticle (Ø = 10 ± 2 nm), with a diisocyanate. These H-NC were compared to the homopolymer network regarding the actuation performance, contractual stress (σcontr) as well as thermal and mechanical properties. The melting range of the OPDL crystals (ΔTm,OPDL) was shifted in homo polymer networks from 36 °C – 76 °C to 41°C – 81 °C for H-NC with 9 wt% of MNP content. The actuators were explored by variation of separating temperature (Tsep), which splits the OPDL crystalline domain into actuating and geometry determining segments. Tsep was varied in the melting range of the nanocomposites and the actuation capability and contractual stress (σcontr) of the nanocomposite actuators could be adjusted. The reversible strain (εrev) was decreased from 11 ± 0.3% for homo polymer network to 3.2±0.3% for H-NC9 with 9 wt% of MNP indicating a restraining effect of the MNP on chain mobility. The results show that the performance of H-NCs in terms of thermal and elastic properties can be tailored by MNP content, however for higher reversible actuation, lower MNP contents are preferable.

Second-order diffraction (SOD) of x-rays refers to all diffraction processes where the photons reaching the detector have been diffracted twice within a crystal lattice. By measuring the two dimensional intensity profile of SOD, it is possible to distinguishing rescattering processes taking place inside each grain (perfect crystal domain) or in between grains. These two SOD regimes, usually called dynamical and kinematical, respectively, are ruled by size and relative orientation of the grains. In this work, we demonstrate how to explore SOD phenomena to understand the micro scale grain structure in plastically deformed silicon single crystal.

In the safety assessment of a radioactive waste disposal, it is extremely important to assess the migration behavior of long-half-life radionuclides in the disposal environment. The migration behavior in the disposal environment for a radionuclide varies with the chemical form of the nuclide. In particular, C-14 has various chemical forms, and its migration behavior in the disposal environment substantially varies with the chemical forms. It has been reported that hardly soluble C-14 is generated in PWRs. However, the chemical form of this hardly soluble C-14 is little known. In this study, the thermal decomposition behavior of particles containing C-14 and the mass spectra of gases released through thermal decomposition were analyzed in order to examine the chemical form of C-14 generated in PWRs. In this study, the gases released during the thermogravimetric (TG) analysis were partially oxidized to CO2, trapped in an alkaline solution and analysed for C-14. Another part of the gas was analysed directly by mass spectrometry (MS). The residues obtained after TG analysis were also analysed for C-14 by oxidizing the residue to CO2, trapping the CO2 in alkaline solutions and analysing C-14 by LSC. During TG-analysis in inert gas (He) atmosphere, about 90% of C-14 was found in residue, while when air was used during TG-analysis, no C-14 could be detected in residue. From the MS-analysis of species released during TG-analysis in inert gas, fragments regarded as originating from ion-exchange resins were detected in released gases. Based on this result, it was found that while substances originating from ion-exchange resin were present in radioactive particles generated in a PWR, the main part of C-14 was contained in the residue after heating in the form of thermally stable substances, easy to be oxidized by air at high temperature. It was not possible to determine their exact chemical composition in this work but also, In addition, sorption of insoluble C-14 to cementitious materials was preliminarily examined. As a results, the concentration of insoluble C-14 decreased greatly in 7 days. That means insoluble C-14 tended not to stay in water. Elucidation of the sorption mechanism in the disposal environment of these C-14 is also a future task.

This work shows a part of a theoretical study of Polymer-Clay Nanocomposites (PCN) formed by an acetylated amylose segment and fatty acids present in the Pequi oil, a fruit from the Brazilian Cerrado, in aqueous medium, including or not, organophilized montmorillonite (MMT-O). The simulated systems aim to provide qualitative information about the molecular movement among diverse chemical species; their structural and behavioral correlations and essential intermolecular forces. The calculations were carried out by Molecular Mechanics and Dynamics methods with the Polymer Consistent Force Field-interface. Simulation results had shown behavioral differences between systems. Without MMT-O, the acetyl amylose residues quickly became coiled, most of the fatty acids cover its surface, and water molecules are stabilized over the polysaccharide portions free of fatty acids. With MMT-O the fatty acids show a potential plasticizing effect due to the greater compatibility between the components of the studied system, since the organic assemblage is strongly attracted by the electrostatic force of the clay. Besides, water molecules flow to the clay layer, while the non polar portion of fatty acids increase their flexibility, in spite to stay attached to acetyl amylose, progressively coiled, through hydrogen bonds. This behavior is interpreted as an improvement in the miscibility of the oil. The new knowledge acquired about these molecular systems encourages us to increase the models complexity, and undertake further studies in the design of PCNs with biopolymers.

Rapid transitions between semiconducting and metallic phases of transition-metal dichalcogenides are of interest for 2D electronics applications. Theoretical investigations have been limited to using thermal energy, lattice strain and charge doping to induce the phase transition, but have not identified mechanisms for rapid phase transition. Here, we use density functional theory to show how optical excitation leads to the formation of a low-energy intermediate crystal structure along the semiconductor-metal phase transition pathway. This metastable crystal structure results in significantly reduced barriers for the semiconducting-metal phase transition pathway leading to rapid transition in optically excited crystals.

Motivated by an experimental finding on the density of supercooled water at high pressure [O. Mishima, J. Chem. Phys. 133, 144503 (2010)] we performed atomistic molecular dynamics simulations study of bulk water in the isothermal-isobaric ensemble. Cooling and heating cycles at different isobars and isothermal compression at different temperatures are performed on the water sample with pressures that range from 0 to 1.0 GPa. The cooling simulations are done at temperatures that range from 40 K to 380 K using two different cooling rates, 10 K/ns and 10 K/5 ns. For the heating simulations we used the slowest heating rate (10 K/5 ns) by applying the same range of isobars. Our analysis of the variation of the volume of the bulk water sample with temperature at different pressures from both isobaric cooling/heating and isothermal compression cycles indicates a concave-downward curvature at high pressures that is consistent with the experiment for emulsified water. In particular, a strong concave down curvature is observed between the temperatures 180 K and 220 K. Below the glass transition temperature, which is around 180 K at 1GPa, the volume turns to concave upward curvature. No crystallization of the supercooled liquid state was observed below 180 K even after running the system for an additional microsecond.

A synthesis method to form foams consisting of a shell of metals conformally coated on carbon nanotube (CNT) arrays by electroplating from a single bath electrolyte is demonstrated in this work. A triple cyclic pulse electrodeposition technique was used to deposit Ni and Cu layers on the CNT arrays, and electron microscopy was then used to identify conditions amenable to semi-conformal and island growth morphologies. Nanoindentation of the resulting metallic-CNT composite foam structure, using a flat punch/compression geometry, demonstrates that adding metallic shells to the CNT turf to create a metallic low density foam increases both the hardness and elastic modulus; however, once island growth initiates there is no significant subsequent increase in mechanical properties with increases in deposited metals.

The recently discovered orthorhombic allotrope of silicon, Si24, is an exciting prospective material for the future of solar energy due to a quasi-direct bandgap near 1.3 eV, coupled with the abundance and environmental stability of silicon. Synthesized via precursor Na4Si24 at high temperature and pressure (∼850 °C, 9 GPa), typical synthesis results have yielded polycrystalline samples with crystallites on the order of 20 μm. Several approaches to increase the crystal size have yielded success, including in-situ thermal spikes and refined selection of the starting materials. Microstructural analysis suggests that coherency exists between diamond silicon (d-Si) and Na4Si24. This hypothesis has led to the successful attempts at single crystal synthesis by selecting large crystals of d-Si along with metallic Na as the precursors rather than powdered and mixed precursor material. The new synthesis approach has yielded single crystals of Na4Si24 greater than 100 μm. These results represent a breakthrough in synthesis that enables further characterization and utility. The promise of Si24 for the future of solar energy generation and efficient electronics is strengthened through these advances in synthesis.

Schwarzites are crystalline, 3D porous structures with a stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strain and energy absorption of four different Schwarzites. We considered two Schwarzites families, the so-called Gyroid and Primitive and two structures from each family. We carried out reactive molecular dynamics simulations, using the ReaxFF force field as available in the LAMMPS code. Our results also show they exhibit remarkable resilience under mechanical compression. They can be reduced to half of their original size before structural failure (fracture) occurs.

Lanthanide nanoparticles had the possibility to couple many imaging techniques into a sole labeling agent has awaken high expectations on personalized medicine or <<Theranostics>>. This is possible due to their intrinsic physic – chemical properties. Combining different imaging techniques physicians may provide a better treatment and perform surgical procedures that might increase the survival rate of patients. Hence, there is an enormous opportunity area for the development of lanthanide multimodal nanoparticles. For this study, we synthesized Gd – Gd2O3 nanoparticles at room temperature by reduction method assisted by Tannic acid, and later we doped them with different ratios of Eu. The nanoparticles were analyzed through high resolution microscopy (HRTEM), Raman Spectroscopy, luminescence, and magnetic characterizations. We found small nanoparticles with a mean size of 5 nm, covered in a carbonaceous layer. In addition, different emissions were detected depending on Eu concentration. Finally, the magnetization vs. temperature recorded under zero field cooled (ZFC) and field cooled (FC) conditions exhibit an antiferromagnetic to ferromagnetic phase transition in samples with Gd2O3, and hysteresis loops recorded at 100 Oe and 2 K showed a relevant magnetization without magnetic remanence. Hence, these nanomaterials have interesting properties to be tested in biocompatibility assays.

The purpose of this work is to study the effect of SiO2- and Al2O3-NPs on the microstructure and mechanical properties of the weld bead (WB) created by a process of Submerged Arc Welding (SAW) between two AISI 1025 steel plates. Also it was necessary consider the chemical compositions of slags and burned fluxes, in order to determine the elements that are deposited and contribute in the final microstructure of WB. The welding materials to form each WB were a M12K electrode, a commercial fused flux (CFF) and AISI 1025 steel plates bevelled at 45°. In addition SiO2- or Al2O3-NPs an ethylic alcohol mixture were applied directly to the beveled surfaces, just before the SAW process, which was carried out according to the AWS A5.17 norm. Microstructural and phase changes at the Heat Affected Zone (HAZ) and Welding Zone (WZ) were analysed by metallographic Optical and Scanning Electron Microscopies. The mechanical properties of the WBs were determined through Tensile, Charpy impact and Vickers Hardness tests. By means of metallography of WBs, it was determined that the length of the AF needles increases in 113 and 183 % when adding SiO2- or Al2O3-NPs, respectively. Related to the mechanical properties of the WB, the tensile and yield strength decreases with both additions, SiO2- or Al2O3-NPs. The microhardness at WZ was found to decrease by adding such oxide-NPs. Moreover, the impact energy absorbed by the WBs increases approximately by 83 or 57% due to SiO2- or Al2O3-NPs addition, respectively.