A three-way three-mode extension of De Boeck and Rosenberg's (1988) two-way two-mode hierarchical classes model is presented for the analysis of individual differences in binary object × attribute arrays. In line with the two-way hierarchical classes model, the three-way extension represents both the association relation among the three modes and the set-theoretical relations among the elements of each model. An algorithm for fitting the model is presented and evaluated in a simulation study. The model is illustrated with data on psychiatric diagnosis. Finally, the relation between the model and extant models for three-way data is discussed.

The relationship between the higher-order factor model and the hierarchical factor model is explored formally. We show that the Schmid-Leiman transformation produces constrained hierarchical factor solutions. Using a generalized Schmid-Leiman transformation and its inverse, we show that for any unconstrained hierarchical factor model there is an equivalent higher-order factor model with direct effects (loadings) on the manifest variables from the higher-order factors. Therefore, the class of higher-order factor models (without direct effects of higher-order factors) is nested within the class of unconstrained hierarchical factor models. In light of these formal results, we discuss some implications for testing the higher-order factor model and the issue of general factor. An interesting aspect concerning the efficient fitting of the higher-order factor model with direct effects is noted.

On-line item generation is becoming increasingly feasible for many cognitive tests. Item generation seemingly conflicts with the well established principle of measuring persons from items with known psychometric properties. This paper examines psychometric principles and models required for measurement from on-line item generation. Three psychometric issues are elaborated for item generation. First, design principles to generate items are considered. A cognitive design system approach is elaborated and then illustrated with an application to a test of abstract reasoning. Second, psychometric models for calibrating generating principles, rather than specific items, are required. Existing item response theory (IRT) models are reviewed and a new IRT model that includes the impact on item discrimination, as well as difficulty, is developed. Third, the impact of item parameter uncertainty on person estimates is considered. Results from both fixed content and adaptive testing are presented.

In this paper, it is shown that various violations of the 2-PL model and the nominal response model can be evaluated using the Lagrange multiplier test or the equivalent efficient score test. The tests presented here focus on violation of local stochastic independence and insufficient capture of the form of the item characteristic curves. Primarily, the tests are item-oriented diagnostic tools, but taken together, they also serve the purpose of evaluation of global model fit. A useful feature of Lagrange multiplier statistics is that they are evaluated using maximum likelihood estimates of the null-model only, that is, the parameters of alternative models need not be estimated. As numerical examples, an application to real data and some power studies are presented.

Some nonparametric dimensionality assessment procedures, such as DIMTEST and DETECT, use nonparametric estimates of item pair conditional covariances given an appropriately chosen subtest score as their basic building blocks. Such conditional covariances given some subtest score can be regarded as an approximation to the conditional covariances given an appropriately chosen unidimensional latent composite, where the composite is oriented in the multidimensional test space direction in which the subtest score measures best. In this paper, the structure and properties of such item pair conditional covariances given a unidimensional latent composite are thoroughly investigated, assuming a semiparametric IRT modeling framework called a generalized compensatory model. It is shown that such conditional covariances are highly informative about the multidimensionality structure of a test. The theory developed here is very useful in establishing properties of dimensionality assessment procedures, current and yet to be developed, that are based upon estimating such conditional covariances.

In particular, the new theory is used to justify the DIMTEST procedure. Because of the importance of conditional covariance estimation, a new bias reducing approach is presented. A byproduct of likely independent importance beyond the study of conditional covariances is a rigorous score information based definition of an item's and a score's direction of best measurement in the multidimensional test space.

A procedure for generating multivariate nonnormal distributions is proposed. Our procedure generates average values of intercorrelations much closer to population parameters than competing procedures for skewed and/or heavy tailed distributions and for small sample sizes. Also, it eliminates the necessity of conducting a factorization procedure on the population correlation matrix that underlies the random deviates, and it is simpler to code in a programming language (e.g., FORTRAN). Numerical examples demonstrating the procedures are given. Monte Carlo results indicate our procedure yields excellent agreement between population parameters and average values of intercorrelation, skew, and kurtosis.

In this paper, the constrained maximum likelihood estimation of a two-level covariance structure model with unbalanced designs is considered. The two-level model is reformulated as a single-level model by treating the group level latent random vectors as hypothetical missing-data. Then, the popular EM algorithm is extended to obtain the constrained maximum likelihood estimates. For general nonlinear constraints, the multiplier method is used at the M-step to find the constrained minimum of the conditional expectation. An accelerated EM gradient procedure is derived to handle linear constraints. The empirical performance of the proposed EM type algorithms is illustrated by some artifical and real examples.

The ISOP-model or model of twodimensional or bi-isotonicity (Scheiblechner, 1995) postulates that the probabilities of ordered response categories increase isotonically in the order of subject “ability” and item ”easiness”. Adding a conventional cancellation axiom for the factors of subjects and items gives the ADISOP model where the c.d.f.s of response categories are functions of an additive item and subject parameter and an ordinal category parameter. Extending cancellation to the interactions of subjects and categories as well as of items and categories (independence axiom of the category factor from the subject and item factor) gives the CADISOP model (completely additive model) in which the parallel c.d.f.s are functions of the sum of subject, item and category parameters. The CADISOP model is very close to the unidimensional version of the polytomous Rasch model with the logistic item/category characteristic(s) replaced by nonparametric axioms and statistics. The axioms, representation theorems and algorithms for model fitting of the additive models are presented.

When r Principal Components are available for k variables, the correlation matrix is approximated in the least squares sense by the loading matrix times its transpose. The approximation is generally not perfect unless r =k. In the present paper it is shown that, when r is at or above the Ledermann bound, r principal components are enough to perfectly reconstruct the correlation matrix, albeit in a way more involved than taking the loading matrix times its transpose. In certain cases just below the Ledermann bound, recovery of the correlation matrix is still possible when the set of all eigenvalues of the correlation matrix is available as additional information.

Standard item response theory (IRT) models fit to dichotomous examination responses ignore the fact that sets of items (testlets) often come from a single common stimuli (e.g. a reading comprehension passage). In this setting, all items given to an examinee are unlikely to be conditionally independent (given examinee proficiency). Models that assume conditional independence will overestimate the precision with which examinee proficiency is measured. Overstatement of precision may lead to inaccurate inferences such as prematurely ending an examination in which the stopping rule is based on the estimated standard error of examinee proficiency (e.g., an adaptive test). To model examinations that may be a mixture of independent items and testlets, we modified one standard IRT model to include an additional random effect for items nested within the same testlet. We use a Bayesian framework to facilitate posterior inference via a Data Augmented Gibbs Sampler (DAGS; Tanner & Wong, 1987). The modified and standard IRT models are both applied to a data set from a disclosed form of the SAT. We also provide simulation results that indicates that the degree of precision bias is a function of the variability of the testlet effects, as well as the testlet design.

The Gibbs sampler can be used to obtain samples of arbitrary size from the posterior distribution over the parameters of a structural equation model (SEM) given covariance data and a prior distribution over the parameters. Point estimates, standard deviations and interval estimates for the parameters can be computed from these samples. If the prior distribution over the parameters is uninformative, the posterior is proportional to the likelihood, and asymptotically the inferences based on the Gibbs sample are the same as those based on the maximum likelihood solution, for example, output from LISREL or EQS. In small samples, however, the likelihood surface is not Gaussian and in some cases contains local maxima. Nevertheless, the Gibbs sample comes from the correct posterior distribution over the parameters regardless of the sample size and the shape of the likelihood surface. With an informative prior distribution over the parameters, the posterior can be used to make inferences about the parameters underidentified models, as we illustrate on a simple errors-in-variables model.

The partial derivative matrices of the class of orthomax-rotated factor loadings with respect to the unrotated maximum likelihood factor loadings are derived. The reported results are useful for obtaining standard errors of the orthomax-rotated factor loadings, with or without row normalization (standardization) of the initial factor loading matrix for rotation. Using a numerical example, we verify our analytic formulas by comparing the obtained standard error estimates with that from some existing methods. Some advantages of the current approach are discussed.

In the distance approach to nonlinear multivariate data analysis the focus is on the optimal representation of the relationships between the objects in the analysis. In this paper two methods are presented for including weights in distance-based nonlinear multivariate data analysis. In the first method, weights are assigned to the objects while the second method is concerned with differential weighting of groups of variables. When each analysis variable defines a group the latter method becomes a variable weighting method. For objects the weights are assumed to be given; for groups of variables they may be given, or estimated. These weighting schemes can also be combined and have several important applications. For example, they make it possible to perform efficient analyses of large data sets, to use the distance-based variety of nonlinear multivariate data analysis as an addition to loglinear analysis of multiway contingency tables, and to do stability studies of the solutions by applying the bootstrap on the objects or the variables in the analysis. These and other applications are discussed, and an efficient algorithm is proposed to minimize the corresponding loss function.

Although Thurstonian models provide an attractive representation of choice behavior, they have not been extensively used in ranking applications since only recently efficient estimation methods for these models have been developed. These, however, require the use of special-purpose estimation programs, which limits their applicability. Here we introduce a formulation of Thurstonian ranking models that turns an idiosyncratic estimation problem into an estimation problem involving mean and covariance structures with dichotomous indicators. Well-known standard solutions for the latter can be readily applied to this specific problem, and as a result any Thurstonian model for ranking data can be fitted using existing general purpose software for mean and covariance structure analysis. Although the most popular programs for covariance structure analysis (e.g., LISREL and EQS) cannot be presently used to estimate Thurstonian ranking models, other programs such as MECOSA already exist that can be straightforwardly used to estimate these models.

The estimation of model parameters in structural equation models with polytomous variables can be handled by several computationally efficient procedures. However, sensitivity or influence analysis of the model is not well studied. We demonstrate that the existing influence analysis methods for contingency tables or for normal theory structural equation models cannot be applied directly to structural equation models with polytomous variables; and we develop appropriate procedures based on the local influence approach of Cook (1986). The proposed procedures are computationally efficient, the necessary bits of the proposed diagnostic measures are readily available following an usual fit of the model. We consider the influence of an individual cell frequency with respect to three cases: when all parameters in an unstructured model are of interest, when the unstructured polychoric correlations are of interest, and when the structural parameters are of interest. We also consider the sensitivity of the parameters estimates. Two examples based on real data are presented for illustration.

This paper discusses a regression model for the analysis of longitudinal count data observed in a panel study. An integer-valued first-order autoregressive [INAR(1)] Poisson process is adapted to represent time-dependent correlations among the counts. By combining the INAR(1)-representation with a random effects approach, a new negative multinomial distribution is derived that includes the bivariate negative binomial distribution proposed by Edwards and Gurland (1961) and Subrahmaniam (1966) as a special case. A detailed analysis of the relationship between personality factors and daily emotion experiences illustrates the approach.

A version of the discrete proportional hazards model is developed for psychometrical applications. In such applications, a primary covariate that influences failure times is a latent variable representing a psychological construct. The Metropolis-Hastings algorithm is studied as a method for performing marginal likelihood inference on the item parameters. The model is illustrated with a real data example that relates the age at which teenagers first experience various substances to the latent ability to avoid the onset of such behaviors.

Models and parameters of finite mixtures of multivariate normal densities conditional on regressor variables are specified and estimated. We consider mixtures of multivariate normals where the expected value for each component depends on possibly nonnormal regressor variables. The expected values and covariance matrices of the mixture components are parameterized using conditional mean- and covariance-structures. We discuss the construction of the likelihood function, estimation of the mixture model with regressors using three different EM algorithms, estimation of the asymptotic covariance matrix of parameters and testing for the number of mixture components. In addition to simulation studies, data on food preferences are analyzed.

This paper presents a new class of models for persons-by-items data. The essential new feature of this class is the representation of the persons: every person is represented by its membership to multiple latent classes, each of which belongs to one latent classification. The models can be considered as a formalization of the hypothesis that the responses come about in a process that involves the application of a number of mental operations. Two algorithms for maximum likelihood (ML) and maximum a posteriori (MAP) estimation are described. They both make use of the tractability of the complete data likelihood to maximize the observed data likelihood. Properties of the MAP estimators (i.e., uniqueness and goodness-of-recovery) and the existence of asymptotic standard errors were examined in a simulation study. Then, one of these models is applied to the responses to a set of fraction addition problems. Finally, the models are compared to some related models in the literature.

A highly popular method for examining the stability of a data clustering is to split the data into two parts, cluster the observations in Part A, assign the objects in Part B to their nearest centroid in Part A, and then independently cluster the Part B objects. One then examines how close the two partitions are (say, by the Rand measure). Another proposal is to split the data into k parts, and see how their centroids cluster. By means of synthetic data analyses, we demonstrate that these approaches fail to identify the appropriate number of clusters, particularly as sample size becomes large and the variables exhibit higher correlations.