Various liquid and gaseous alternative fuels have been proposed to replace the kerosene as aircraft fuel. Furthermore, new combustion technologies were developed to reduce the emissions of aero-engine. A staged fuel injection arrangement for a lean burn combustion system was applied to improve the operability of an aero-engine by achieving high flame stability at reduced combustion emissions. Originally, both circuits (pilot and main) are fuelled by kerosene; moreover, the pilot injector is operating at low power (engine idle and approach) and the pilot flame is anchored in an airflow recirculation zone. In the case of the performed research, the pilot injector was modified to allow the use of gaseous fuels. Thus, the burner model allows a flexible balancing of the mass flows for gaseous and liquid fuel. The present paper describes the investigation of ignitability for the proposed staged combustor model fuelled by gaseous and liquid fuels. A short overview on physical properties of used fuels is given. To investigate atomisation and ignition, different measurements systems were used. The effectiveness of two ignitor types (spark plug and laser ignitor) was analysed. The ignition performance of the combustor operating on various fuels was compared and discussed in detail.

Several critical load cases during the aircraft design process result from atmospheric turbulence. Thus, rapidly performable and highly accurate dynamic response simulations are required to analyse a wide range of parameters. A method is proposed to predict dynamic loads on an elastically trimmed, large civil aircraft using computational fluid dynamics in conjunction with model reduction. A small-sized modal basis is computed by sampling the aerodynamic response at discrete frequencies and applying proper orthogonal decomposition. The linear operator of the Reynolds-averaged Navier-Stokes equations plus turbulence model is then projected onto the subspace spanned by this basis. The resulting reduced system is solved at an arbitrary number of frequencies to analyse responses to 1-cos gusts very efficiently. Lift coefficient and surface pressure distribution are compared with full-order, non-linear, unsteady time-marching simulations to verify the method. Overall, the reduced-order model predicts highly accurate global coefficients and surface loads at a fraction of the computational cost, which is an important step towards the aircraft loads process relying on computational fluid dynamics.

When a gas turbine engine is shut down it will develop a circumferential thermal gradient vertically across the compressor due to hot air rising from the cooling metal components and pooling at the top. As the hot compressor rotor drum and casing cool and contract in the presence of this thermal gradient, they do so non-uniformly and therefore will bend slightly, in a phenomenon known as rotor bow. Starting an engine under bowed conditions can result in damage, representing a risk to both airworthiness and operational capability. This study consolidates some preliminary findings by the authors relating to the drivers for rotor bow, such as engine geometry, aircraft-engine integration and rotor temperature on shutdown. The commercial and military operational considerations associated with rotor bow are also discussed, including limitations which may result from a bowed rotor; the influence of operations including the final flight and descent profiles, taxi procedures and rapid turnaround requirements; as well as some practical solutions which may be implemented to reduce the impact of rotor bow.

This paper reviews some of the research that has been carried out at the University of Liverpool where the Flight Science and Technology Research Group has developed its Heliflight-R full-motion research simulator to create a simulation environment for the launch and recovery of maritime helicopters to ships. HELIFLIGHT-R has been used to conduct flight trials to produce simulated Ship-Helicopter Operating Limits (SHOLs). This virtual engineering approach has led to a much greater understanding of how the dynamic interface between the ship and the helicopter contributes to the pilot's workload and the aircraft's handling qualities and will inform the conduct of future real-world SHOL trials. The paper also describes how modelling and simulation has been applied to the design of a ship's superstructure to improve the aerodynamic flow field in which the helicopter has to operate. The superstructure aerodynamics also affects the placement of the ship's anemometers and the dispersion of the ship's hot exhaust gases, both of which affect the operational envelope of the helicopter, and both of which can be investigated through simulation.

Recently, universities and Small and Medium Enterprises (SMEs) have initiated the development of nanosatellites because of their low cost, small size and short development time. The challenging aspects for these satellites are their small surface area for heat dissipation due to their limited size. There is not enough space for mounting radiators for heat dissipation. As a result, thermal modelling becomes a very important element in designing a small satellite. The paper presents detailed and simplified generic thermal models for CubeSat panels and also for the complete satellite. The detailed model takes all thermal resistances associated with the respective layers into account, while in the simplified model, the layers with similar materials have been combined and are represented by a single thermal resistance. The proposed models are then applied to a CubeSat standard nanosatellite called AraMiS-C1, developed at Politecnico di Torino, Italy. Thermal resistance measured through both models is compared, and the results are similar. The absorbed power and the corresponding temperature differences between different points of the single panel and complete satellite are measured. In order to verify the theoretical results, thermal resistance of the AraMiS-C1 and its panels are measured through experimental set-ups. Theoretical and measured values are in close agreement.

In this paper, an efficient approach to design and optimize a flight controller of a small-scale unmanned helicopter is proposed. Given the identified helicopter model, the Linear Quadratic Gaussian/Loop Transfer Recovery (LQG/LTR) robust control method is applied for trajectory tracking and attitude control of the helicopter with a two-loop hierarchical control architecture. Since the performance of the controller extremely depends on its weighting matrices, the Artificial Bee Colony (ABC) algorithm is introduced to automatically select the parameters of the matrices. Comparative studies between optimal algorithms are also carried out. A series of flight experiments and simulations are conducted to investigate the effectiveness and robustness of the proposed optimised controller.

In this paper, a droplet to film interaction model technique is presented. In the proposed approach, the liquid and gas continua are modelled using an enhanced Volume-of-Fluid (VoF) technique while the droplets are tracked using a Lagrangian framework and are coupled to the Eulerian phases using source terms. The eventual target application is an aeroengine bearing chamber in which oil is found as droplets, shed from the bearings, splashing on impact, separated from wall surfaces at obstacles or simply re-entrained, and as a continuum oil film coating the bearing chamber outer walls which it also cools. In finite volume Computational Fluid Dynamics (CFD) techniques, a prohibitively large number of cells would be required to describe the details of the droplet impact phenomenon. Based on published correlations, the splashing droplets are created and tracked as Lagrangian particles. The flowing film and the gas continua are handled with an enhanced VoF technique.