The Clean Sky Joint Undertaking is currently managing two large-scale research and innovation programmes under FP7 and Horizon 2020 to contribute to the strengthening of the European aeronautical sector ensuring global leadership and competitiveness. This paper describes the research and demonstration programmes in Clean Sky (2008–2017) and Clean Sky 2 (2014–2024) related to propulsion technologies for the next-generation aircraft. The bulk of this work is addressed in Clean Sky 1 under the “Sustainable And Green Engines” (SAGE) programme and under the “ENGINES” programme in Clean Sky 2. The High-Level Objectives are described for each engine architecture as well as the targets in terms of CO2 and noise reduction versus a year 2000 reference unless stated otherwise. An overview of the new engine concepts that would satisfy the ACARE objectives is presented, including the main technologies which are to be developed to ensure the successful demonstration of each of those new engine concepts.

The effect of inertial forces on the Structural Dynamics (SD) behaviour of Elastic Flapping Wings (EFWs) is investigated. In this regard, an analytical modal-based SD solution of EFW undergoing a prescribed rigid body motion is initially derived. The formulated initial-value problem is solved analytically to study the EFW structural responses, and sensitivity with respect to EFWs’ key parameters. As a case study, a rectangular wing undergoing a prescribed sinusoidal motion is simulated. The analytical solution is derived for the first time and helps towards a conceptual understanding of the overall EFW's SD behaviour and its analysis required in their designs. Specifically, the EFW transient and steady response in on-off servo condition is also attended.

The lifting-line theory is widely used for obtaining aerodynamic performance results in various engineering fields, from aircraft conceptual design to wind-power generation. Many different models were proposed, each tailored for a specific purpose, thus having a rather narrow applicability range. This paper presents a general lifting-line model capable of accurately analysing a wide range of engineering problems involving lifting surfaces, both steady-state and unsteady cases. It can be used for lifting surface with sweep, dihedral, twisting and winglets and includes features such as non-linear viscous corrections, unsteady and quasi-steady force calculation, stable wake relaxation through fictitious time marching and wake stretching and dissipation. Possible applications include wing design for low-speed aircraft and unmanned aerial vehicles, the study of high-frequency avian flapping flight or wind-turbine blade design and analysis. Several validation studies are performed, both steady-state and unsteady, the method showing good agreement with experimental data or numerical results obtained with more computationally expensive methods.

Aerodynamic mixing of a Mach 2 jet controlled with rectangular flat tab with length equal to the nozzle exit diameter, placed at locations 0.25D, 0.5D and 0.75D, downstream of the nozzle exit, has been studied in the presence of different levels of pressure gradients corresponding to nozzle pressure ratio (NPR) range from 3 to 8. The mixing modification associated with shifted tabs is compared with the mixing caused by the same tab at the nozzle exit (0D). The aerodynamic mixing caused by the mass transporting small-scale vortices shed from the edges of the tab placed at the shifted position is found to be appreciably larger than the tab at nozzle exit, for some levels of pressure gradient. For some other levels of nozzle expansion, mixing caused by the shifted tab is comparable to that of tab at nozzle exit. The waves present in the core of the jet controlled with shifted tab were found to be weaker than that of the jet controlled with tab at nozzle exit. At a marginally underexpanded state corresponding to NPR 8, jet core length reduction caused by the tab at 0.75D is about 39.21%, which is closer to the reduction of 40.2%, caused by the tab at 0D. The corresponding core length reduction for tab at 0.25D and 0.5D are 38.16% and 20%, respectively.

This paper aims to build the finite element model of the composite sinusoidal specimens and to carry out the parametric analysis. In this paper, the damage behaviour and the energy-absorbing results of composite sinusoidal specimens have been studied by quasi-static crushing experiments. The failure mechanisms of specimens under quasi-static crushing is further analysed. A numerical simulation has been performed by using the finite element model code LS-DYNA. The numerical results, in terms of load -displacement data, have been compared against experimental data, and good agreement has been found. Moreover, a sensitivity study has been carried out by varying material properties in order to assess their influence on the numerical results, and the material parameter selection scheme is optimised based on the constructed corresponding response surfaces. The results show that the response surface model has passed the test of goodness of fit, and the optimisation method can effectively assist the finite element modelling, and greatly decrease the numbers of trial and error.

This paper discusses how the processes of Continuing Airworthiness Management Organisations can be made more efficient by applying Lean principles and digital solutions, to obtain costs savings and improved compliance standards. Lean management is the process of eliminating waste by maximising value through balancing workloads and cutting out inefficient processes. Though Lean was initially applied to manufacturing production lines, an opportunity exists to apply the principles of Lean in airworthiness management. One such aspect of airworthiness management is the processing of records which is an essential part of safety and compliance. Software solutions designed with Lean philosophy and focus on airworthiness management processes can provide benefits in managing the flow of records and extracting actionable information from them for cost reduction and improving safety. Further value can be extracted by applying additional software solutions that will lay a strong foundation for machine learning and predictive analytics – taking aircraft maintenance from a reactive model towards a proactive model.

Multiple Attribute Decision Analysis (MADA), known to be simple and convenient, is one of the most commonly used methods for Effectiveness Evaluation of Fighter (EEF), in which the attribute weight assignment plays a key role. Generally, there are two parts in the index system of MADA, i.e. performance index and decision index (or label), which denote the specific performance and the category of the object, respectively. In some index systems of EEF, the labels can be easily obtained, which are presented as the generations of fighters. However, the existing methods of attribute weight determination usually ignore or do not take full advantage of the supervisory function of labels. To make up for this deficiency, this paper develops an objective method based on fuzzy Bayes risk. In this method, a loss function model based on Gaussian kernel function is proposed to cope with the drawback that the loss function in Bayes risk is usually determined by experts. In order to evaluate the credibility of assigned weights, a longitudinal deviation and transverse residual correlation coefficient model is designed. Finally, a number of experiments, including the comparison experiments on University of California Irvine (UCI) data and EEF, are carried out to illustrate the superiority and applicability of the proposed method.