On the basis of crystal structures of the pyrroloquinoline quinone (PQQ) dependent enzymes methanol dehydrogenase (MDH) and soluble glucose dehydrogenase (s-GDH), different catalytic mechanisms have been proposed. However, several lines of biochemical and kinetic evidence are strikingly similar for both enzymes. To resolve this discrepancy, we have compared the structures of these enzymes in complex with their natural substrates in an attempt to bring them in line with a single reaction mechanism. In both proteins, PQQ is located in the center of the molecule near the axis of pseudo-symmetry. In spite of the absence of significant sequence homology, the overall binding of PQQ in the respective active sites is similar. Hydrogen bonding interactions are made with polar protein side chains in the plane of the cofactor, whereas hydrophobic stacking interactions are important below and above PQQ. One Arg side chain and one calcium ion are ligated to the ortho-quinone group of PQQ in an identical fashion in either active site, in agreement with their proposed catalytic function of polarizing the PQQ C5-O5 bond. The substrates are bound in a similar position above PQQ and within hydrogen bond distance of the putative general bases Asp297 (MDH) and His144 (s-GDH). On the basis of these similarities, we propose that MDH and s-GDH react with their substrates through an identical mechanism, comprising general base-catalyzed hydride transfer from the substrate to PQQ and subsequent tautomerization of the PQQ intermediate to reduced PQQ.

Members of the serpin family of serine proteinase inhibitors play important roles in the inflammatory, coagulation, fibrinolytic, and complement cascades. An inherent part of their function is the ability to undergo a structural rearrangement, the stressed (S) to relaxed (R) transition, in which an extra strand is inserted into the central A β-sheet. In order for this transition to take place, the A sheet has to be unusually flexible. Malfunctions in this flexibility can lead to aberrant protein linkage, serpin inactivation, and diseases as diverse as cirrhosis, thrombosis, angioedema, emphysema, and dementia. The development of agents that control this conformational rearrangement requires a high resolution structure of an active serpin. We present here the topology of the archetypal serpin α1-antitrypsin to 2 Å resolution. This structure allows us to define five cavities that are potential targets for rational drug design to develop agents that will prevent conformational transitions and ameliorate the associated disease.

The ligand-binding domain of the human low-density lipoprotein receptor consists of seven modules, each of 40–45 residues. In the presence of calcium, these modules adopt a common polypeptide fold with three conserved disulfide bonds. A concatemer of the first and second modules (LB1–2) folds efficiently in the presence of calcium ions, forming the same disulfide connectivities as in the isolated modules. The three-dimensional structure of LB1–2 has now been solved using two-dimensional 1H NMR spectroscopy and restrained molecular dynamics calculations. No intermodule nuclear Overhauser effects were observed, indicating the absence of persistent interaction between them. The near random-coil NH and Hα chemical shifts and the low φ and ψ angle order parameters of the four-residue linker suggest that it has considerable flexibility. The family of LB1–2 structures superimposed well over LB1 or LB2, but not over both modules simultaneously. LB1 and LB2 have a similar pattern of calcium ligands, but the orientations of the indole rings of the tryptophan residues W23 and W66 differ, with the latter limiting solvent access to the calcium ion. From these studies, it appears that although most of the modules in the ligand-binding region of the receptor are joined by short segments, these linkers may impart considerable flexibility on this region.

The active sites and substrate bindings of Rhizobium trifolii molonyl-CoA synthetase (MCS) catalyzing the malonyl-CoA formation from malonate and CoA have been determined based on NMR spectroscopy, site-directed mutagenesis, and comparative modeling methods. The MCS-bound conformation of malonyl-CoA was determined from two-dimensional–transferred nuclear Overhauser effect spectroscopy data. MCS protein folds into two structural domains and consists of 16 α-helices, 24 β-strands, and several long loops. The core active site was determined as a wide cleft close to the end of the small C-terminal domain. The catalytic substrate malonate is placed between ATP and His206 in the MCS enzyme, supporting His206 in its catalytic role as it generates reaction intermediate, malonyl-AMP. These findings are strongly supported by previous biochemical data, as well as by the site-directed mutagenesis data reported here. This structure reveals the biochemical role as well as the substrate specificity that conservative residues of adenylate-forming enzymes have.

Previously, we determined the DNA and amino acid sequences as well as biochemical and biophysical properties of a series of fungal phytases. The amino acid sequences displayed 49–68% identity between species, and the catalytic properties differed widely in terms of specific activity, substrate specificity, and pH optima. With the ultimate goal to combine the most favorable properties of all phytases in a single protein, we attempted, in the present investigation, to increase the specific activity of Aspergillus fumigatus phytase. The crystal structure of Aspergillus niger NRRL 3135 phytase known at 2.5 Å resolution served to specify all active site residues. A multiple amino acid sequence alignment was then used to identify nonconserved active site residues that might correlate with a given favorable property of interest. Using this approach, Gln27 of A. fumigatus phytase (amino acid numbering according to A. niger phytase) was identified as likely to be involved in substrate binding and/or release and, possibly, to be responsible for the considerably lower specific activity (26.5 vs. 196 U·[mg protein]−1 at pH 5.0) of A. fumigatus phytase when compared to Aspergillus terreus phytase, which has a Leu at the equivalent position. Site-directed mutagenesis of Gln27 of A. fumigatus phytase to Leu in fact increased the specific activity to 92.1 U·(mg protein)−1, and this and other mutations at position 27 yielded an interesting array of pH activity profiles and substrate specificities. Analysis of computer models of enzyme–substrate complexes suggested that Gln27 of wild-type A. fumigatus phytase forms a hydrogen bond with the 6-phosphate group of myo-inositol hexakisphosphate, which is weakened or lost with the amino acid substitutions tested. If this hydrogen bond were indeed responsible for the differences in specific activity, this would suggest product release as the rate-limiting step of the A. fumigatus wild-type phytase reaction.

We present a model for the skeletal muscle troponin-C (TnC)/troponin-I (TnI) interaction, a critical molecular switch that is responsible for calcium-dependent regulation of the contractile mechanism. Despite concerted efforts by multiple groups for more than a decade, attempts to crystallize troponin-C in complex with troponin-I, or in the ternary troponin complex, have not yet delivered a high-resolution structure. Many groups have pursued different experimental strategies, such as X-ray crystallography, NMR, small-angle scattering, chemical cross-linking, and fluorescent resonance energy transfer (FRET) to gain insights into the nature of the TnC/TnI interaction. We have integrated the results of these experiments to develop a model of the TnC/TnI interaction, using an atomic model of TnC as a scaffold. The TnI sequence was fit to each of two alternate neutron scattering envelopes: one that winds about TnC in a left-handed sense (Model L), and another that winds about TnC in a right-handed sense (Model R). Information from crystallography and NMR experiments was used to define segments of the models. Tests show that both models are consistent with available cross-linking and FRET data. The inhibitory region TnI(95–114) is modeled as a flexible β-hairpin, and in both models it is localized to the same region on the central helix of TnC. The sequence of the inhibitory region is similar to that of a β-hairpin region of the actin-binding protein profilin. This similarity supports our model and suggests the possibility of using an available profilin/actin crystal structure to model the TnI/actin interaction. We propose that the β-hairpin is an important structural motif that communicates the Ca2+-activated troponin regulatory signal to actin.

We previously reported the de novo design of an amphiphilic peptide [YGG(IEKKIEA)4] that forms a native-like, parallel triple-stranded coiled coil. Starting from this peptide, we sought to regulate the assembly of the peptide by a metal ion. The replacement of the Ile18 and Ile22 residues with Ala and Cys residues, respectively, in the hydrophobic positions disrupted of the triple-stranded α-helix structure. The addition of Cd(II), however, resulted in the reconstitution of the triple-stranded α-helix bundle, as revealed by circular dichroism (CD) spectroscopy and sedimentation equilibrium analysis. By titration with metal ions and monitoring the change in the intensity of the CD spectra at 222 nm, the dissociation constant Kd was determined to be 1.5 ± 0.8 μM for Cd(II). The triple-stranded complex formed by the 113Cd(II) ion showed a single 113Cd NMR resonance at 572 ppm whose chemical shift was not affected by the presence of Cl− ions. The 113Cd NMR resonance was connected with the βH protons of the cysteine residue by 1H–113Cd heteronuclear multiple quantum correlation spectroscopy. These NMR results indicate that the three cysteine residues are coordinated to the cadmium ion in a trigonal-planar complex. Hg(II) also induced the assembly of the peptide into a triple-stranded α-helical bundle below the Hg(II)/peptide ratio of 1/3. With excess Hg(II), however, the α-helicity of the peptide was decreased, with the change of the Hg(II) coordination state from three to two. Combining this construct with other functional domains should facilitate the production of artificial proteins with functions controlled by metal ions.

Little is known of the plant branched-chain α-ketoacid dehydrogenase complex. We have undertaken a detailed study of the structure of the dihydrolipoyl acyltransferase (BCE2) subunit that forms the core of the complex, to which two other enzymes attach. Mature Arabidopsis thaliana BCE2 was expressed in Escherichia coli. The soluble recombinant protein was purified using a Superose 6 size-exclusion column to >90% homogeneity and was catalytically active. The recombinant protein formed a stable complex with a native molecular mass of 0.95 MDa and an S coefficient of 19.4, consistent with formation of a 24-mer. Negative-staining transmission electron microscopy of the recombinant protein confirmed that BCE2 forms a core with octagonal symmetry. Despite divergence of mammalian and plant BCE2s, there is clearly conservation of structure that is independent of primary sequence.

The unfolding enthalpy of the pH 4 molten globule from sperm whale apomyoglobin has been measured by isothermal titration calorimetry, using titration to acid pH. The unfolding enthalpy is close to zero at 20 °C, in contrast both to the positive values expected for peptide helices and the negative values reported for holomyoglobin and native apomyoglobin. At 20 °C, the hydrophobic interaction should make only a small contribution to the unfolding enthalpy according to the liquid hydrocarbon model. Our result indicates that some factor present in the unfolding enthalpies of native proteins makes the unfolding enthalpy of the pH 4 molten globule less positive than expected from data for peptide helices.

Bovine β-lactoglobulin (BLG) in vivo has been found complexed with fatty acids, especially palmitic and oleic acid. To elucidate the still unknown structure-function relationship in this protein, the interactions between 13C enriched palmitic acid (PA) and BLG were investigated by means of one-, two-, and three-dimensional NMR spectroscopy in the pH range 8.4–2.1. The NMR spectra revealed that at neutral pH the ligand is bound within the central cavity of BLG, with the methyl end deeply buried within the protein. The analysis of 13C spectra of the holo protein revealed the presence of conformational variability of bound PA carboxyl end in the pH range 8.4–5.9, related to the Tanford transition. The release of PA starts at pH lower than 6.0, and it is nearly complete at acidic pH. This finding is relevant in relation to the widely reported hypothesis that this protein can act as a transporter through the acidic gastric tract. Ligand binding and release is shown to be completely reversible over the entire pH range examined, differently from other fatty acid binding proteins whose behavior is analyzed throughout the paper. The mode of interaction of BLG is compatible with the proposed function of facilitating the digestion of milk fat during the neonatal period of calves.

Pure rat brain tubulin is readily palmitoylated in vitro using [3H]palmitoyl CoA but no added enzymes. A maximum of approximately six palmitic acids are added per dimer in 2–3 h at 36–37 °C under native conditions. Both α and β tubulin are labeled, and 63–73% of the label was hydroxylamine-labile, presumed thioesters. Labeling increases with increasing pH and temperature, and with low concentrations of guanidine HCl or KCl (but not with urea) to a maximum of ∼13 palmitates/dimer. High SDS and guanidine HCl concentrations are inhibitory. At no time could all 20 cysteine residues of the dimer be palmitoylated. Polymerization to microtubules, or use of tubulin S, markedly decreases the accessibility of the palmitoylation sites. Palmitoylation increases the electrophoretic mobility of a portion of α tubulin toward the β band. Palmitoylated tubulin binds a colchicine analogue normally, but during three warm/cold polymerization/depolymerization cycles there is a progressive loss of palmitoylated tubulin, indicating decreased polymerization competence. We postulate that local electrostatic factors are major regulators of reactivity of tubulin cysteine residues toward palmitoyl CoA, and that the negative charges surrounding a number of the cysteines are sensitive to negative charges on palmitoyl CoA.

The disulfide bond pattern of catrocollastatin-C was determined by N-terminal sequencing and mass spectrometry. The N-terminal disintegrin-like domain is a compact structure including eight disulfide bonds, seven of them in the same pattern as the disintegrin bitistatin. The protein has two extra cysteine residues (XIII and XVI) that form an additional disulfide bond that is characteristically found in the disintegrin-like domains of cellular metalloproteinases (ADAMs) and PIII snake venom Zn-metalloproteinases (SVMPs). The C-terminal cysteine-rich domain of catrocollastatin-C contains five disulfide bonds between nearest-neighbor cysteines and a long range disulfide bridge between CysV and CysX. These results provide structural evidence for a redefinition of the disintegrin-like and cysteine-rich domain boundaries. An evolutionary pathway for ADAMs, PIII, and PII SVMPs based on disulfide bond engineering is also proposed.

Eucaryotes possess one or more NADP-dependent methylene-THF dehydrogenases as part of multifunctional enzymes. In addition, yeast expresses an unusual monofunctional NAD-dependent enzyme, yMTD. We report X-ray structures for the apoenzyme and its complex with NAD+ at 2.8 and 3.0 Å resolution, respectively. The protein fold resembles that seen for the human and Escherichia coli dehydrogenase/cyclohydrolase bifunctional enzymes. The enzyme has two prominent domains, with the active site cleft between them. yMTD has a noncanonical NAD-binding domain that has two inserted strands compared with the NADP-binding domains of the bifunctional enzymes. This insert precludes yMTD from dimerizing in the same way as the bifunctional enzymes. yMTD functions as a dimer, but the mode of dimerization is novel. It does not appear that the difference in dimerization accounts for the difference in cofactor specificity or for the loss of cyclohydrolase activity. These functional differences are probably accounted for by minor differences within the tertiary structure of the active site of the monomeric protein.

Domains belonging to the immunoglobulin-like fold are responsible for a wide variety of molecular recognition processes. Here we describe a new family of domains, the HYR family, which is predicted to belong to this fold, and which appears to be involved in cellular adhesion. HYR domains were identified in several eukaryotic proteins, often associated with Complement Control Protein (CCP) modules or arranged in multiple copies. Our analysis provides a sequence and structural basis for understanding the role of these domains in interaction mechanisms and leads to further characterization of heretofore undescribed repeated domains with similar folds found in several bacterial proteins involved in enzymatic activities (some chitinases) or in cell surface adhesion (streptococcal C-alpha antigen).

Six helix surface positions of protein G (Gβ1) were redesigned using a computational protein design algorithm, resulting in the five fold mutant Gβ1m2. Gβ1m2 is well folded with a circular dichroism spectrum nearly identical to that of Gβ1, and a melting temperature of 91 °C, ∼6 °C higher than that of Gβ1. The crystal structure of Gβ1m2 was solved to 2.0 Å resolution by molecular replacement. The absence of hydrogen bond or salt bridge interactions between the designed residues in Gβ1m2 suggests that the increased stability of Gβ1m2 is due to increased helix propensity and more favorable helix dipole interactions.

Several recent studies have shown that it is possible to increase protein stability by improving electrostatic interactions among charged groups on the surface of the folded protein. However, the stability increases are considerably smaller than predicted by a simple Coulomb's law calculation, and in some cases, a charge reversal on the surface leads to a decrease in stability when an increase was predicted. These results suggest that favorable charge–charge interactions are important in determining the denatured state ensemble, and that the free energy of the denatured state may be decreased more than that of the native state by reversing the charge of a side chain. We suggest that when the hydrophobic and hydrogen bonding interactions that stabilize the folded state are disrupted, the unfolded polypeptide chain rearranges to compact conformations with favorable long-range electrostatic interactions. These charge–charge interactions in the denatured state will reduce the net contribution of electrostatic interactions to protein stability and will help determine the denatured state ensemble. To support this idea, we show that the denatured state ensemble of ribonuclease Sa is considerably more compact at pH 7 where favorable charge–charge interactions are possible than at pH 3, where unfavorable electrostatic repulsion among the positive charges causes an expansion of the denatured state ensemble. Further support is provided by studies of the ionic strength dependence of the stability of charge–reversal mutants of ribonuclease Sa. These results may have important implications for the mechanism of protein folding.

The development of an energy or scoring function for protein structure prediction is greatly enhanced by testing the function on a set of computer-generated conformations (decoys) to determine whether it can readily distinguish native-like conformations from nonnative ones. We have created “Decoys ‘R’ Us,” a database containing many such sets of conformations, to provide a resource that allows scoring functions to be improved.

β-Lactamases are involved in bacterial resistance. Members of the metallo-enzyme class are now found in many pathogenic bacteria and are becoming thus of major clinical importance. Despite the availability of Zn-β-lactamase X-ray structures their mechanism of action is still unclear. One puzzling observation is the presence of one or two zincs in the active site. To aid in assessing the role of zinc content in β-lactam hydrolysis, the replacement by Ser of the zinc-liganding residue Cys168 in the Zn-β-lactamase from Bacillus cereus strain 569/H/9 was carried out: the mutant enzyme (C168S) is inactive in the mono-Zn form, but active in the di-Zn form. The structure of the mono-Zn form of the C168S mutant has been determined at 1.85 Å resolution. Ser168 occupies the same position as Cys168 in the wild-type enzyme. The protein residues mostly affected by the mutation are Asp90–Arg91 and His210. A critical factor for the activity of the mono-Zn species is the distance between Asp90 and the Zn ion, which is controlled by Arg91: a slight movement of Asp90 impairs catalysis. The evolution of a large superfamily including Zn-β-lactamases suggests that they may not all share the same mechanism.

The paucity of detailed X-ray crystallographic structures of integral membrane proteins arises from substantive technical obstacles in the overexpression of multimilligram quantities of protein, and in the crystallization of purified protein-detergent complexes (PDCs). With rare exception, crystal contacts within the lattice are mediated by protein–protein interaction, and the detergent surrounding the protein behaves as a disordered solvent. The addition and use of surfactants that display mesoscopic self-assembly behavior in membrane protein crystallization experiments presents a novel alternative strategy. Well-ordered crystals of the water channel human aquaporin-1 (hAQP1) that diffract to 4 Å resolution have been obtained with this approach.

Coiled coils consist of two or more amphipathic α-helices wrapped around each other to form a superhelical structure stabilized at the interhelical interface by hydrophobic residues spaced in a repeating 3–4 sequence pattern. Dimeric coiled coils have been shown to often form in a single step reaction in which association and folding of peptide chains are tightly coupled. Here, we ask whether such a simple folding mechanism may also apply to the formation of a three-stranded coiled coil. The designed 29-residue peptide LZ16A was shown previously to be in a concentration-dependent equilibrium between unfolded monomer (M), folded dimer (D), and folded trimer (T ). We show by time-resolved fluorescence change experiments that folding of LZ16A to D and T can be described by [equation] and [equation]. The following rate constants were determined (25 °C, pH 7): k1 = 7.8 × 104 M−1 s−1, k−1 = 0.015 s−1, k2 = 6.5 × 105 M−1 s−1, and k−2 = 1.1 s−1. In a separate experiment, equilibrium binding constants were determined from the change with concentration of the far-ultraviolet circular dichroism spectrum of LZ16A and were in good agreement with the kinetic rate constants according to KD = k1/2k−1 and KT = k2/k−2. Furthermore, pulsed hydrogen-exchange experiments indicated that only unfolded M and folded D and T were significantly populated during folding. The results are compatible with a two-step reaction in which a subpopulation of association competent (e.g., partly helical) monomers associate to dimeric and trimeric coiled coils.