Thin-film beam combining technology is an effective approach to improve output power while maintaining beam quality. However, the lack of comprehensive research into the key factors affecting the beam quality in systems makes it challenging to achieve a practical combined beam source with high brightness. This paper clearly established that the temperature rise of dichroic mirrors (DMs) and sub-beam overlapping precision are the main factors affecting the beam quality of the system, with quantified effects. Based on this understanding, a combined light source of four channels of 3 kW fiber lasers was achieved, and an output power of 11.4 kW with a beam quality of M2x = 1.601 and M2y = 1.558, using three high-steepness low-absorption DMs and the active control technique. To the best of our knowledge, this is the best beam quality for a 10 kW light source. This study offers a solution for practical high-power laser sources in the tens of kilowatts range.

Suppressing mode degradation is the key issue for high-power laser delivery; however, diagnosing mode degradation in its entirety, ranging from the contents and origins to locations, has always been a major obstacle. Here, a versatile approach for tracing the origins of mode coupling is demonstrated through addressing the differential intermodal dispersions of fiber modes. Full recognition for modal contents and the origins of mode degradation are experimentally completed in a two-mode fiber laser delivery system, which assists a significant improvement of beam quality M2 from 1.35 to 1.15 at the highest power of over 300 W. This method yields a quantitative characterization for manipulating the individual mode of dual-mode coupling origins or their combinations. This work points toward a promising strategy for the online tracing of mode coupling in cascade fiber links, thus enabling further pursuit of seeking extreme beam quality in high-power fiber laser systems.

The high-energy/high-intensity laser facility PHELIX of the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt, Germany, has been in operation since 2008. Here, we review the current system performance, which is the result of continuous development and further improvement. Through its versatile frontend architecture, PHELIX can be operated in both long- and short-pulse modes, corresponding to ns-pulses with up to 1 kJ pulse energy and sub-ps, 200 J pulses, respectively. In the short-pulse mode, the excellent temporal contrast and the control over the wavefront make PHELIX an ideal driver for secondary sources of high-energy ions, neutrons, electrons and X-rays. The long-pulse mode is mainly used for plasma heating, which can then be probed by the heavy-ion beam of the linear accelerator of GSI. In addition, PHELIX can now be used to generate X-rays for studying exotic states of matter created by heavy-ion heating using the ion beam of the heavy-ion synchrotron of GSI.

The spatial distribution of beams with orbital angular momentum in the far field is known to be extremely sensitive to angular aberrations, such as astigmatism, coma and trefoil. This poses a challenge for conventional beam optimization strategies when a homogeneous ring intensity is required for an application. We developed a novel approach for estimating the Zernike coefficients of low-order angular aberrations in the near field based solely on the analysis of the ring deformations in the far field. A fast, iterative reconstruction of the focal ring recreates the deformations and provides insight into the wavefront deformations in the near field without relying on conventional phase retrieval approaches. The output of our algorithm can be used to optimize the focal ring, as demonstrated experimentally at the 100 TW beamline at the Extreme Light Infrastructure - Nuclear Physics facility.

In order to reach the highest intensities, modern laser systems use adaptive optics to control their beam quality. Ideally, the focal spot is optimized after the compression stage of the system in order to avoid spatio-temporal couplings. This also requires a wavefront sensor after the compressor, which should be able to measure the wavefront on-shot. At PHELIX, we have developed an ultra-compact post-compressor beam diagnostic due to strict space constraints, measuring the wavefront over the full aperture of 28 cm. This system features all-reflective imaging beam transport and a high dynamic range in order to measure the wavefront in alignment mode as well as on shot.

Stimulated Raman-scattering-based lasers provide an effective way to achieve wavelength conversion. However, thermally induced beam degradation is a notorious obstacle to power scaling and it also limits the applicable range where high output beam quality is needed. Considerable research efforts have been devoted to developing Raman materials, with diamond being a promising candidate to acquire wavelength-versatile, high-power, and high-quality output beam owing to its excellent thermal properties, high Raman gain coefficient, and wide transmission range. The diamond Raman resonator is usually designed as an external-cavity pumped structure, which can easily eliminate the negative thermal effects of intracavity laser crystals. Diamond Raman converters also provide an approach to improve the beam quality owing to the Raman cleanup effect. This review outlines the research status of diamond Raman lasers, including beam quality optimization, Raman conversion, thermal effects, and prospects for future development directions.

The acceleration dynamics of electrons in a laser wakefield accelerator is discussed, in particular the coupling of longitudinal and transverse motion. This coupling effect is important for electrons injected with a velocity below the laser pulse group velocity. It is found that the electron bunch is adiabatically focused during the acceleration and that a finite bunch width contributes to bunch lengthening and growth of energy spread. These results indicate the importance of a small emittance for the injected electron bunch.