Clays and their composites have been widely used for secondary containment walls for underground storage tanks and landfills. The pore-size changes occurring in the clay have a profound effect on its permeability. This study presents a new method for evaluating the use of an atomic force microscope (AFM) for studying wet clay in a non-aqueous state in order to determine the pore-size of clay at various water contents, a type of study typically performed by the more expensive environmental scanning electronic microscope. The method consists of mounting a sponge saturated with water under the sample in order to prevent drying by the heat generated by the AFM electronics. The micro-scale AFM image results show that the clay-particle separations reduce linearly as the water content increases. This change in pore-size is postulated to be attributed to the reduction in the size of the diffuse double layer and more extensive hydrogen bonds between clay particles and bipolar water molecules. The AFM was not able to produce nano-scale images due to excessive adhesion between the cantilever arm and the wet clay sample.

A scanning tunneling microscope (STM) requires precise control of the tip–sample distance to maintain a constant set-point tunneling current. Typically, the tip–sample distance is controlled through the use of a control algorithm. The control algorithm takes in the measured tunneling current and returns a correction to the tip–sample distance in order to achieve and maintain the set-point value for tunneling current. We have developed an STM simulator to test the accuracy and performance of four control algorithms. The operation and effectiveness of these control algorithms are evaluated.

The aim of this study was to evaluate if hormonal treatment causes changes in the morphology of matrinxã Brycon amazonicus spermatozoa. Twelve males were randomized into three treatment groups: 1, Ovaprim™ (0.5 ml/kg); 2, carp pituitary extract (CPE; 2.0 mg/kg); and 3, NaCl solution 0.9% – control group (0.5 ml/kg); with four replicates. Morphological sperm analysis was performed using an optical and scanning electron microscope. The percentage of normal spermatozoa (49.6±4.6% to 60.8±2.8%), with primary (26.1±6.4% to 45.3±4.5%) and secondary abnormalities (4.4±2.9% to 13.9±3.5%) did not differ significantly between treatment groups. There were no significant differences between treatments in relation to the primary abnormalities found in the head (10.5±3.8% to 25.5±6.3%), the midpiece (0.1±0.1% to 0.2±0.2%) and in the flagellum (18.9±3.8% to 15.5±3.1%), as well as in the secondary abnormalities, located in the head (0.8±0.4% to 7.8±4.6%) and in the flagellum (2.2±1.1% to 6.1±1.5%). When each abnormality was evaluated individually, only the percentage of degenerated head was higher in the CPE-induced group (24.9±5.9%) than the control group (7.2±3.1%). We concluded that the use of pituitary extract of carp or Ovaprim™ under the conditions of this experiment does not influence the percentage of sperm abnormalities in B. amazonicus.

Microfluidic devices can provide unique control over both the chemoattractant gradient and the migration environment of the cells. Our work incorporates laser-machined micro and nanofluidic channels into bulk fused silica and cover slip-sized silica wafers. We have designed “open” chemotaxis devices that produce passive chemoattractant gradients without an external micropipette system. Since the migration area is unobstructed, cells can be easily loaded and strategically placed into the devices with a standard micropipette. The reusable monolithic glass devices have integral ports that can generate multiple gradients in a single experiment. We also used cover slip microfluidics for chemotaxis assays. Passive gradients elicited from these cover slips could be readily adapted for high throughput chemotaxis assays. We have also demonstrated for the first time that cells can be recruited into cover slip ports eliciting passive chemoattractant gradients. This proves, in principle, that intravital cover slip configurations could deliver controlled amounts of drugs, chemicals, or pathogens as well as recruit cells for proteomic or histological analysis in living animals while under microscopic observation. Intravital cover slip fluidics will create a new paradigm for in vivo observation of biological processes.

A confocal scanning laser holography (CSLH) microscope that uniquely combines the concepts of confocal microscopy with holography has been validated for making nonintrusive, full three-dimensional (3D) intensity and phase measurements of objects from a single viewpoint of observation without loss of object information. The phase measurements have been used to determine the 3D refractive indices of a point source heated silicone oil. The refractive indices are converted to 3D temperature measurements, which are useful for heat transfer studies. An important feature of CSLH is its nonintrusive 3D scanning method, which enables its application to the study of Marangoni convection in microgravity with minimal operational vibrations affecting the motion of fluid in the specimen.

Two pairs of solid test-masses have been considered to perform in space the test of the universality of free fall with an accuracy of at least 10−15. These cylindrical masses are precisely at the heart of the MICROSCOPE mission instrument comprising two differential electrostatic accelerometers. These masses shall exhibit material quality, shapes, positions and alignments in regard to stringent experimental requirements. Indeed the space experiment is based on the control of the two masses submitted to the same gravity acceleration along the same orbit at 810 km altitude with an accuracy of 10−11 m. Thus effects of Earth and satellite gravity gradients shall be contained as well as any other disturbances of the mass motions induced by their magnetic susceptibility or electrical dissymmetries, by outgassing of the materials or radiation emissivity. Furthermore, the electrostatic levitation of the two masses depends dramatically on the mass shapes and electrical properties in particular for the definition of the sensitive axes orientation. All these aspects will be presented from the mass characteristics to the space MICROSCOPE experiment performance.