In this paper, an antenna with 8 GHz (7–15 GHz) bandwidth is designed, simulated, fabricated, and measured. Commonly, for the effective use of electromagnetic sources, mode converters are used to transform donut-shaped patterns to directive patterns. This paper introduces a novel antenna called the pattern director antenna (PDA) that solves most problems associated with the azimuthally symmetric output modes of high-power microwave sources. The PDA accepts directly (without the need for mode conversion) an azimuthally symmetric generated mode of an electromagnetic source and converts it to radiate a directive pattern. For the proof of concept and validation of the design by simulations, the 3D printing technology [using polylactic acid (PLA)] is used to fabricate the PDA and measure its radiation patterns and return loss. The selected material is cheap and also environmentally friendly. The antenna was coated with aluminum to become a conductor. The gain is from 16.8 to 21.8 dB in the frequency range. The S11, main lobe deviation (MLD), and sidelobe level (SLL) are less than −15 dB, 2°, and −7 dB, in all frequency range, respectively. The simulation results are in good agreement with the measurement.

This paper presents a novel assessment method that minimizes test-fixture-induced errors in non-coaxial power combiner measurement by extending the port reduction method. This method involves terminating certain ports to acquire the scattering matrix of an N-port network from the scattering matrix measured at a reduced port order. The entire DUT scattering matrix is obtained from multiple scanning measurements, which are taken from partial coaxial accessible ports, based on a set of configurable terminating states. This advantage is leveraged to exclude a major portion of coaxial launch structures that would otherwise be incorporated in the conventional multiport test fixture. An analogous concept here is applied to measure a waveguide traveling-wave power combiner. A sandwiched twin structure, containing a divider/combiner pair with certain auxiliary through-type components cushioned between them, is utilized to assess the combiner characteristics. A theoretical framework of the proposed method was established to test its potential precision. Thereafter, an in-situ implementation was conducted to test its practical application on a traveling-wave combined amplifier prototype operating at the Q-band (33–39 GHz).

This paper presents an approach using the method of separation of variables applied to 2D Helmholtz equations in the Cartesian coordinate. The solution is then computed by a series solutions resulted from solving a sequence of 1D problems, in which the 1D solutions are computed using pollution free difference schemes. Moreover, non-polluted numerical integration formulae are constructed to handle the integration due to the forcing term in the inhomogeneous 1D problems. Consequently, the computed solution does not suffer the pollution effect. Another attractive feature of this approach is that a direct method can be effectively applied to solve the tridiagonal matrix resulted from numerical discretization of the 1D Helmholtz equation. The method has been tested to compute 2D Helmholtz solutions simulating electromagnetic scattering from an open large cavity and rectangular waveguide.

The present paper presents the design and development of a dual-channel microwave rotary joint using coaxial waveguide as primary waveguide and rectangular waveguide as the secondary waveguide. Design is presented at 5.85–7.02 GHz with 20% bandwidth and at 14–14.5 GHz bands with 3.6% bandwidth using dual channel mode transducers exciting transverse electromagnetic (TEM) mode in the coaxial waveguide. Rectangular to coaxial waveguide transitions employing multi-stepped doorknob transitions are used to excite the TEM mode from the rectangular waveguide. The measured results for electrical parameters such as return loss, insertion loss of the dual-channel rotary joint are presented with 360° rotation of the rotary part with respect to the stator part.

At present, millimeter wave fast tunable components are required for telecommunication systems, car collision prevention radar, etc. The only mechanical way of control inserts practically no loss in the frequency agile system. That is why micro-electromechanical systems devices are being studied intensively. In an overview, an alternative way – piezo-electromechanical tuning of microwave components – is reported.

This paper deals with the study of propagation of electromagnetic wave in a rectangular waveguide filled with an inhomogeneous plasma in which electron density varies linearly in a transverse direction to the mode propagation. A transcendental equation in ω (microwave frequency) is obtained that governs the mode propagation. In addition, an attempt is made to examine the effect of density inhomogeneity on the energy gain acquired by the electron (electron bunch) when it is injected in the waveguide along the direction of the mode propagation. On the basis of angle of deflection of the electron motion we optimize the microwave parameters so that the electron does not strike with the waveguide walls. Conditions have been discussed for achieving larger energy gain. The plasma density inhomogeneity is found to play a crucial role on the cutoff frequency, fields and dispersion relation of the TE10 mode as well as on the acceleration gradient in the waveguide.